HP HPE6-A90 Exam Dumps<\/b><\/a> and Practice Test Dumps<\/b><\/p>\n <\/p>\n
Question: 41. Which protocol is commonly used to securely authenticate and authorize network access through a centralized server?<\/b><\/p>\n\n- <\/b> RADIUS<\/span>
\n<\/span>2.<\/b> FTP<\/span>
\n<\/span>3.<\/b> TFTP<\/span>
\n<\/span>4.<\/b> ICMP<\/span><\/li>\n<\/ol>\nCorrect Answer:<\/b> 1<\/span><\/p>\nExplanation:<\/b> RADIUS (Remote Authentication Dial-In User Service) is commonly used to provide centralized authentication, authorization, and accounting for network access. It can be integrated with network access devices such as wireless controllers, VPN gateways, and switches. When a user attempts to connect, the network device can communicate with a RADIUS server to validate credentials and determine the appropriate access permissions. FTP and TFTP are file-transfer protocols, while ICMP is used for network control and diagnostic messaging. Centralized authentication through RADIUS can simplify administration and provide consistent access-control policies across multiple network devices and services.<\/span><\/p>\nQuestion: 42. Which type of Ethernet cable is commonly used to connect a network switch to a computer?<\/b><\/p>\n\n- <\/b> Console cable<\/span>
\n<\/span>2.<\/b> Straight-through Ethernet cable<\/span>
\n<\/span>3.<\/b> Fiber-only cable<\/span>
\n<\/span>4.<\/b> Serial rollover cable<\/span><\/li>\n<\/ol>\nCorrect Answer:<\/b> 2<\/span><\/p>\nExplanation:<\/b> A straight-through Ethernet cable is traditionally used to connect different types of Ethernet devices, such as a computer to a network switch. The transmit and receive pairs are arranged consistently at both ends according to the applicable Ethernet wiring standard. Modern devices often support automatic MDI\/MDIX, allowing them to detect and accommodate different cable configurations automatically, but understanding traditional cable requirements remains useful for networking fundamentals and troubleshooting. Console and rollover cables are generally associated with device management, while fiber cables use optical transmission rather than copper Ethernet connections.<\/span><\/p>\nQuestion: 43. What is the primary purpose of a network firewall?<\/b><\/p>\n\n- <\/b> Increase wireless signal strength<\/span>
\n<\/span>2.<\/b> Assign MAC addresses<\/span>
\n<\/span>3.<\/b> Control traffic according to security policies<\/span>
\n<\/span>4.<\/b> Synchronize system clocks<\/span><\/li>\n<\/ol>\nCorrect Answer:<\/b> 3<\/span><\/p>\nExplanation:<\/b> A network firewall controls traffic between network zones according to configured security policies. It can inspect traffic and determine whether connections should be permitted or denied based on factors such as source, destination, protocol, port, connection state, and application information, depending on the firewall capabilities. Firewalls are commonly deployed between trusted and untrusted networks or between internal security zones. A firewall does not primarily assign MAC addresses, synchronize clocks, or increase wireless signal strength. Proper firewall configuration helps organizations control communication pathways and reduce unauthorized network access while allowing required services to function.<\/span><\/p>\nQuestion: 44. Which wireless technology is commonly used to connect devices to a local area network without physical Ethernet cabling?<\/b><\/p>\n\n- <\/b> Wi-Fi<\/span>
\n<\/span>2.<\/b> SATA<\/span>
\n<\/span>3.<\/b> HDMI<\/span>
\n<\/span>4.<\/b> USB<\/span><\/li>\n<\/ol>\nCorrect Answer:<\/b> 1<\/span><\/p>\nExplanation:<\/b> Wi-Fi is a wireless networking technology that allows compatible devices to connect to a local area network using radio communication rather than a physical Ethernet cable. Wi-Fi networks commonly use wireless access points to provide connectivity to clients such as laptops, smartphones, and other supported devices. SATA is primarily used for storage-device connections, HDMI is used for audio and video transmission, and USB is a general-purpose peripheral interface. A properly configured Wi-Fi network can provide mobility and flexible device placement while still connecting wireless clients to the organization’s broader IP network.<\/span><\/p>\nQuestion: 45. What does network latency measure?<\/b><\/p>\n\n- <\/b> The number of available IP addresses<\/span>
\n<\/span>2.<\/b> The delay experienced by data as it travels through a network<\/span>
\n<\/span>3.<\/b> The physical length of a MAC address<\/span>
\n<\/span>4.<\/b> The number of VLANs configured on a switch<\/span><\/li>\n<\/ol>\nCorrect Answer:<\/b> 2<\/span><\/p>\nExplanation:<\/b> Network latency refers to the time required for data to travel from one point to another across a network. Lower latency generally means that communication experiences less delay, which is particularly important for applications such as voice, video conferencing, interactive services, and real-time systems. Latency can be affected by factors including distance, processing, queuing, congestion, and the characteristics of the network path. Latency is different from bandwidth, which describes the capacity of a connection. IP address availability, MAC address length, and VLAN count do not directly define network latency.<\/span><\/p>\nQuestion: 46. Which protocol can be used to obtain network configuration information automatically from a DHCP server?<\/b><\/p>\n\n- <\/b> DHCP<\/span>
\n<\/span>2.<\/b> SSH<\/span>
\n<\/span>3.<\/b> DNS<\/span>
\n<\/span>4.<\/b> SNMP<\/span><\/li>\n<\/ol>\nCorrect Answer:<\/b> 1<\/span><\/p>\nExplanation:<\/b> DHCP allows network clients to obtain configuration information automatically from a DHCP server. Depending on the network configuration, this information can include an IP address, subnet mask, default gateway, DNS server addresses, and lease duration. This automated process reduces manual configuration and helps administrators manage addressing across large numbers of devices. SSH provides secure remote access, DNS provides name-resolution services, and SNMP is commonly used for monitoring and management. DHCP is therefore a fundamental service for efficiently configuring IP-enabled clients on enterprise and smaller networks.<\/span><\/p>\nQuestion: 47. Which device normally operates primarily at Layer 2 of the OSI model and forwards frames based on MAC addresses?<\/b><\/p>\n\n- <\/b> Router<\/span>
\n<\/span>2.<\/b> Firewall<\/span>
\n<\/span>3.<\/b> Ethernet switch<\/span>
\n<\/span>4.<\/b> DNS server<\/span><\/li>\n<\/ol>\nCorrect Answer:<\/b> 3<\/span><\/p>\nExplanation:<\/b> An Ethernet switch primarily operates at Layer 2 and forwards Ethernet frames based on destination MAC addresses. It learns source MAC addresses by examining incoming frames and associates them with the corresponding switch ports. When a destination MAC address is known, the switch can forward the frame through the appropriate port within the relevant VLAN. Routers primarily make Layer 3 forwarding decisions using IP addresses, while DNS servers provide name-resolution services. Firewalls can operate across multiple layers depending on their capabilities. Understanding the primary role of each device helps with network design and troubleshooting.<\/span><\/p>\nQuestion: 48. What is the purpose of a loopback interface on a network device?<\/b><\/p>\n\n- <\/b> Provide a logical interface that is not tied to a physical port<\/span>
\n<\/span>2.<\/b> Supply electrical power to another device<\/span>
\n<\/span>3.<\/b> Replace all physical Ethernet interfaces<\/span>
\n<\/span>4.<\/b> Encrypt every network packet<\/span><\/li>\n<\/ol>\nCorrect Answer:<\/b> 1<\/span><\/p>\nExplanation:<\/b> A loopback interface is a logical interface that is not directly associated with a particular physical network port. Because it can remain available even when a physical interface changes state, loopback addresses are often useful for device identification, management, routing protocols, and testing. On routers and Layer 3 devices, loopback interfaces can provide stable logical addresses for services that should not depend on one physical connection. A loopback interface does not supply power, replace all physical interfaces, or automatically encrypt traffic. Its value comes from providing a stable logical interface within the network configuration.<\/span><\/p>\nQuestion: 49. Which IPv4 address represents the loopback network commonly used for local host testing?<\/b><\/p>\n\n- <\/b> 192.168.1.1<\/span>
\n<\/span>2.<\/b> 10.0.0.1<\/span>
\n<\/span>3.<\/b> 127.0.0.1<\/span>
\n<\/span>4.<\/b> 169.254.1.1<\/span><\/li>\n<\/ol>\nCorrect Answer:<\/b> 3<\/span><\/p>\nExplanation:<\/b> 127.0.0.1 is the commonly used IPv4 loopback address. Traffic sent to this address remains within the local host and does not need to travel through a physical network interface to reach another device. It is useful for testing the local TCP\/IP stack and verifying whether network services are responding locally. Addresses in 192.168.0.0\/16 and 10.0.0.0\/8 are private IPv4 addresses, while 169.254.0.0\/16 is associated with link-local addressing. Loopback testing can help administrators distinguish local protocol-stack problems from problems involving external network connectivity.<\/span><\/p>\nQuestion: 50. What is the primary purpose of network monitoring?<\/b><\/p>\n\n- <\/b> Remove the need for network documentation<\/span>
\n<\/span>2.<\/b> Detect performance issues, failures, and abnormal conditions<\/span>
\n<\/span>3.<\/b> Disable all unused interfaces automatically<\/span>
\n<\/span>4.<\/b> Replace network security controls<\/span><\/li>\n<\/ol>\nCorrect Answer:<\/b> 2<\/span><\/p>\nExplanation:<\/b> Network monitoring provides visibility into the performance, availability, and operational status of network infrastructure and services. Monitoring systems can collect information such as interface utilization, packet errors, device availability, latency, and other relevant metrics. Alerts can notify administrators when conditions exceed defined thresholds or when devices become unavailable. Monitoring does not eliminate the need for documentation, automatically solve every security problem, or replace dedicated security controls. Instead, it provides information that helps administrators identify problems, investigate incidents, establish performance baselines, and maintain reliable network operations.<\/span><\/p>\nQuestion: 51. Which type of address is normally assigned to a device by an administrator and does not change automatically through DHCP?<\/b><\/p>\n\n- <\/b> Static IP address<\/span>
\n<\/span>2.<\/b> Broadcast address<\/span>
\n<\/span>3.<\/b> Multicast address<\/span>
\n<\/span>4.<\/b> Loopback-only address<\/span><\/li>\n<\/ol>\nCorrect Answer:<\/b> 1<\/span><\/p>\nExplanation:<\/b> A static IP address is manually configured and normally remains unchanged until an administrator modifies the configuration. Static addressing can be useful for infrastructure devices and services that need predictable addresses, such as certain servers, network appliances, and management interfaces. A dynamically assigned DHCP address can change according to the lease and DHCP configuration. Broadcast and multicast addresses serve communication purposes rather than representing ordinary host configuration choices, while loopback addresses are used for local host communication. Static addressing should be planned carefully to avoid duplicate addresses and conflicts with dynamically assigned address pools.<\/span><\/p>\nQuestion: 52. Which technology is commonly used to identify and separate voice traffic from ordinary data traffic on an enterprise network?<\/b><\/p>\n\n- <\/b> VLANs<\/span>
\n<\/span>2.<\/b> DNS<\/span>
\n<\/span>3.<\/b> ARP<\/span>
\n<\/span>4.<\/b> NAT<\/span><\/li>\n<\/ol>\nCorrect Answer:<\/b> 1<\/span><\/p>\nExplanation:<\/b>