{"id":18052,"date":"2026-09-22T05:08:39","date_gmt":"2026-09-22T05:08:39","guid":{"rendered":"https:\/\/www.examlabs.com\/certification\/?p=18052"},"modified":"2026-09-22T05:09:52","modified_gmt":"2026-09-22T05:09:52","slug":"cwnp-cwna-109-practice-test-questions-and-exam-dumps-part11-q201-220","status":"publish","type":"post","link":"https:\/\/www.examlabs.com\/certification\/cwnp-cwna-109-practice-test-questions-and-exam-dumps-part11-q201-220\/","title":{"rendered":"CWNP CWNA-109 Practice Test Questions and Exam Dumps Part11 Q201-220"},"content":{"rendered":"

View Full <\/b>CWNP CWNA-109 Exam Dumps<\/b><\/a> and Practice Test Dumps<\/b><\/h2>\n

 <\/p>\n

Question 201.<\/b><\/p>\n

Which RF measurement expresses antenna gain relative to an ideal isotropic radiator?<\/b><\/p>\n

    \n
  1. <\/b> dBi<\/span>
    \n<\/span>2.<\/b> dBm<\/span>
    \n<\/span>3.<\/b> dB<\/span>
    \n<\/span>4.<\/b> RSSI<\/span><\/li>\n<\/ol>\n

    Correct Answer: 1. dBi<\/b><\/p>\n

    Explanation:<\/b><\/p>\n

    dBi expresses antenna gain relative to an ideal isotropic radiator, which is a theoretical antenna that radiates equally in all directions. It is commonly used when comparing antenna patterns and calculating EIRP. dBm is an absolute power measurement referenced to 1 milliwatt, while dB represents a relative gain or loss between two values. RSSI is a receiver-specific indication of received signal strength. Antenna gain does not create RF energy; it redistributes available energy so more is radiated in some directions and less in others. Understanding dBi is important when selecting antennas, calculating link budgets, and ensuring regulatory power limits are not exceeded.<\/span><\/p>\n

    Question 202.<\/b><\/p>\n

    Which statement about decibels is correct?<\/b><\/p>\n

      \n
    1. <\/b> dB always represents an absolute power value<\/span>
      \n<\/span>2.<\/b> dB represents a relative gain or loss<\/span>
      \n<\/span>3.<\/b> dB and dBm are always interchangeable<\/span>
      \n<\/span>4.<\/b> dB measures only antenna polarization<\/span><\/li>\n<\/ol>\n

      Correct Answer: 2. dB represents a relative gain or loss<\/b><\/p>\n

      Explanation:<\/b><\/p>\n

      The decibel, or dB, is a logarithmic unit used to express a ratio between two power levels. It can represent gain or loss, such as cable attenuation or antenna system changes, but it is not an absolute power measurement by itself. dBm is an absolute power value referenced to 1 milliwatt, while dBi describes antenna gain relative to an isotropic radiator. WLAN professionals commonly use the Rule of 3s and Rule of 10s for quick dB calculations. Understanding the difference between absolute and relative measurements is essential for link-budget calculations, troubleshooting, and regulatory compliance.<\/span><\/p>\n

      Question 203.<\/b><\/p>\n

      A transmitter operates at 20 dBm. Approximately how much power is this in milliwatts?<\/b><\/p>\n

        \n
      1. <\/b> 20 mW<\/span>
        \n<\/span>2.<\/b> 50 mW<\/span>
        \n<\/span>3.<\/b> 100 mW<\/span>
        \n<\/span>4.<\/b> 200 mW<\/span><\/li>\n<\/ol>\n

        Correct Answer: 3. 100 mW<\/b><\/p>\n

        Explanation:<\/b><\/p>\n

        0 dBm equals 1 mW. Increasing power by 10 dB multiplies it by ten, so 10 dBm equals 10 mW and 20 dBm equals 100 mW. This logarithmic relationship allows WLAN professionals to convert between dBm and milliwatts quickly. A 3 dB increase approximately doubles power, while a 3 dB decrease approximately halves it. These mental conversion rules are particularly useful when working with transmit power, link budgets, antenna systems, and regulatory limits. It is important not to treat dBm as a linear scale because a 20 dBm transmitter is much more powerful than a 10 dBm transmitter, not merely twice as powerful.<\/span><\/p>\n

        Question 204.<\/b><\/p>\n

        Which phenomenon can cause RF signals to arrive at a receiver with different phases and amplitudes because they traveled along different paths?<\/b><\/p>\n

          \n
        1. <\/b> DHCP relay<\/span>
          \n<\/span>2.<\/b> Channel bonding<\/span>
          \n<\/span>3.<\/b> Authentication<\/span>
          \n<\/span>4.<\/b> Multipath**<\/span><\/li>\n<\/ol>\n

          Correct Answer: 4. Multipath<\/b><\/p>\n

          Explanation:<\/b><\/p>\n

          Multipath occurs when copies of the same RF transmission reach a receiver through different physical paths. Reflection, diffraction, and scattering can create these alternate paths, causing signals to arrive with different delays, phases, and amplitudes. In older WLAN systems, multipath could significantly degrade reception, while modern MIMO systems can sometimes exploit multipath to improve performance. DHCP, authentication, and channel bonding are unrelated to propagation. Indoor environments commonly contain abundant multipath because walls, ceilings, floors, furniture, and metal objects reflect RF energy. Understanding multipath is important when interpreting unpredictable signal behavior or designing antenna placement.<\/span><\/p>\n

          Question 205.<\/b><\/p>\n

          Which RF propagation behavior occurs when a signal hits a surface and changes direction without passing fully through it?<\/b><\/p>\n

            \n
          1. <\/b> Reflection<\/span>
            \n<\/span>2.<\/b> Absorption<\/span>
            \n<\/span>3.<\/b> Refraction<\/span>
            \n<\/span>4.<\/b> Diffraction<\/span><\/li>\n<\/ol>\n

            Correct Answer: 1. Reflection<\/b><\/p>\n

            Explanation:<\/b><\/p>\n

            Reflection occurs when an RF signal encounters a surface and some of the energy is redirected rather than passing through. Reflective materials may include metal, concrete, glass, and other building components, depending on frequency and physical properties. Reflection is a major contributor to multipath because multiple reflected copies of the same transmission can reach a receiver at different times. Absorption converts RF energy into another form, refraction changes direction as a wave enters a different medium, and diffraction bends around obstacles. WLAN professionals should expect significant reflection in many indoor environments and account for it during surveys and troubleshooting.<\/span><\/p>\n

            Question 206.<\/b><\/p>\n

            Which propagation effect is most closely associated with RF energy bending around an obstruction?<\/b><\/p>\n

              \n
            1. <\/b> Reflection<\/span>
              \n<\/span>2.<\/b> Diffraction<\/span>
              \n<\/span>3.<\/b> Refraction<\/span>
              \n<\/span>4.<\/b> Amplification<\/span><\/li>\n<\/ol>\n

              Correct Answer: 2. Diffraction<\/b><\/p>\n

              Explanation:<\/b><\/p>\n

              Diffraction occurs when RF energy bends around the edge of an obstruction. It can allow some signal energy to reach areas without direct line of sight, though the resulting signal may be weaker. Reflection is a bounce from a surface, while refraction occurs when a signal changes direction as it passes between propagation media. Amplification increases power rather than describing propagation behavior. Diffraction is relevant in both indoor and outdoor WLANs because buildings, walls, equipment, and terrain can partially obstruct the direct path between transmitter and receiver. It also contributes to the complex multipath environment that characterizes many wireless installations.<\/span><\/p>\n

              Question 207.<\/b><\/p>\n

              Which RF behavior occurs when a signal passes into a different medium and changes direction because propagation speed changes?<\/b><\/p>\n

                \n
              1. <\/b> Absorption<\/span>
                \n<\/span>2.<\/b> Scattering<\/span>
                \n<\/span>3.<\/b> Refraction<\/span>
                \n<\/span>4.<\/b> Polarization<\/span><\/li>\n<\/ol>\n

                Correct Answer: 3. Refraction<\/b><\/p>\n

                Explanation:<\/b><\/p>\n

                Refraction occurs when an RF wave changes direction as it passes from one propagation medium to another and its velocity changes. This behavior is analogous to the way visible light bends when entering water or glass, though RF effects depend on material and frequency. Absorption reduces signal energy, scattering redirects energy in multiple directions, and polarization describes electric-field orientation. Refraction can affect WLAN propagation through different building materials and environmental layers, although it is usually discussed less frequently than reflection, diffraction, and absorption in routine indoor design. Understanding all major propagation behaviors helps explain why RF coverage can deviate from simple geometric expectations.<\/span><\/p>\n

                Question 208.<\/b><\/p>\n

                Which propagation behavior occurs when RF energy encounters an irregular surface or many small objects and is redirected in multiple directions?<\/b><\/p>\n

                  \n
                1. <\/b> Refraction<\/span>
                  \n<\/span>2.<\/b> Absorption<\/span>
                  \n<\/span>3.<\/b> Channel bonding<\/span>
                  \n<\/span>4.<\/b> Scattering**<\/span><\/li>\n<\/ol>\n

                  Correct Answer: 4. Scattering<\/b><\/p>\n

                  Explanation:<\/b><\/p>\n

                  Scattering occurs when RF waves encounter irregular surfaces or collections of objects that redirect portions of the signal in many directions. Foliage, rough walls, machinery, and other complex structures can contribute to scattering. It can create additional multipath components, causing multiple versions of a transmission to arrive at the receiver. Refraction and absorption describe different propagation effects, while channel bonding is a WLAN channel-width mechanism. Modern MIMO systems may benefit from some multipath diversity, but excessive scattering can make RF behavior difficult to predict and may create uneven coverage or fluctuating signal quality.<\/span><\/p>\n

                  Question 209.<\/b><\/p>\n

                  Which term refers to the orientation of an antenna’s electric field?<\/b><\/p>\n

                    \n
                  1. <\/b> Polarization<\/span>
                    \n<\/span>2.<\/b> Modulation<\/span>
                    \n<\/span>3.<\/b> Aggregation<\/span>
                    \n<\/span>4.<\/b> Channelization<\/span><\/li>\n<\/ol>\n

                    Correct Answer: 1. Polarization<\/b><\/p>\n

                    Explanation:<\/b><\/p>\n

                    Polarization refers to the orientation of the electric field radiated by an antenna. Common forms include vertical and horizontal polarization, although circular and other polarization types also exist. For efficient signal transfer, transmitting and receiving antennas should generally have compatible polarization. Significant mismatch can introduce substantial signal loss. Modulation encodes information onto the RF carrier, aggregation combines frames for efficiency, and channelization defines how spectrum is divided. Correct antenna orientation is especially important with external antennas, point-to-point bridges, and specialized WLAN deployments where installers can accidentally create polarization mismatches during mounting.<\/span><\/p>\n

                    Question 210.<\/b><\/p>\n

                    Which factor should be included in an outdoor point-to-point WLAN link-budget calculation?<\/b><\/p>\n

                      \n
                    1. <\/b> SSID name length<\/span>
                      \n<\/span>2.<\/b> Transmit power, antenna gain, cable loss, path loss, and receive sensitivity<\/span>
                      \n<\/span>3.<\/b> DHCP lease duration only<\/span>
                      \n<\/span>4.<\/b> DNS server location only<\/span><\/li>\n<\/ol>\n

                      Correct Answer: 2. Transmit power, antenna gain, cable loss, path loss, and receive sensitivity<\/b><\/p>\n

                      Explanation:<\/b><\/p>\n

                      A link budget evaluates whether enough RF energy will reach the receiver for reliable communication. Important components include transmitter output power, cable and connector loss, antenna gain, free-space and environmental path loss, receiving antenna gain, and receiver sensitivity. A fade margin should also normally be considered to provide reliability when conditions vary. SSID names, DHCP lease duration, and DNS server location do not determine RF link viability. Outdoor bridge design also requires attention to Fresnel-zone clearance, antenna alignment, regulatory limits, weather exposure, mounting stability, and the frequency band being used.<\/span><\/p>\n

                      Question 211.<\/b><\/p>\n

                      Which term describes the minimum RF power level a receiver needs to decode a particular data rate successfully?<\/b><\/p>\n

                        \n
                      1. <\/b> EIRP<\/span>
                        \n<\/span>2.<\/b> Noise floor<\/span>
                        \n<\/span>3.<\/b> Receive sensitivity<\/span>
                        \n<\/span>4.<\/b> Channel utilization<\/span><\/li>\n<\/ol>\n

                        Correct Answer: 3. Receive sensitivity<\/b><\/p>\n

                        Explanation:<\/b><\/p>\n

                        Receive sensitivity is the minimum signal level at which a receiver can successfully decode a transmission under defined conditions. Sensitivity typically varies by modulation and coding scheme. More robust lower-rate modes can usually be decoded at weaker signal levels, while higher-rate modes require stronger and cleaner signals. EIRP describes effective transmitted power, noise floor represents background RF energy, and channel utilization measures how busy the channel is. Receive sensitivity is essential for link budgets because a transmission is only useful if the signal reaching the receiver is above the sensitivity threshold with enough additional margin to maintain reliable communication.<\/span><\/p>\n

                        Question 212.<\/b><\/p>\n

                        Which term describes the amount by which a received signal exceeds the minimum level required for successful reception?<\/b><\/p>\n

                          \n
                        1. <\/b> Co-channel interference<\/span>
                          \n<\/span>2.<\/b> Channel overlap<\/span>
                          \n<\/span>3.<\/b> Beacon overhead<\/span>
                          \n<\/span>4.<\/b> Fade margin**<\/span><\/li>\n<\/ol>\n

                          Correct Answer: 4. Fade margin<\/b><\/p>\n

                          Explanation:<\/b><\/p>\n

                          Fade margin is the difference between the expected received signal level and the minimum signal level needed for reliable operation. A healthy fade margin provides tolerance for environmental variation, movement, weather, multipath fading, foliage changes, or minor alignment changes. A wireless link designed with almost no margin may work initially but fail when conditions change. Fade margin is particularly important for outdoor point-to-point links where environmental conditions can vary over time. Co-channel interference, channel overlap, and beacon overhead affect WLAN performance but do not describe this reliability buffer in a link budget.<\/span><\/p>\n

                          Question 213.<\/b><\/p>\n

                          Which statement best describes why a client’s transmit capability must be considered when setting AP transmit power?<\/b><\/p>\n

                            \n
                          1. <\/b> Excessive AP power can create an asymmetric link<\/span>
                            \n<\/span>2.<\/b> Client power controls SSID length<\/span>
                            \n<\/span>3.<\/b> AP power determines DHCP lease time<\/span>
                            \n<\/span>4.<\/b> Client transmit power changes the encryption algorithm<\/span><\/li>\n<\/ol>\n

                            Correct Answer: 1. Excessive AP power can create an asymmetric link<\/b><\/p>\n

                            Explanation:<\/b><\/p>\n

                            An asymmetric link occurs when the access point transmits strongly enough for a client to hear it at a long distance, but the client’s lower-power transmitter cannot reliably send frames back to the AP. This can result in retries, low throughput, intermittent connectivity, and delayed roaming. WLAN designers should therefore consider the real transmit capabilities of production clients rather than setting all AP radios to maximum power. Balanced power helps create more predictable cell boundaries and bidirectional communication. SSID length, DHCP timing, and encryption are unrelated to the client’s transmit-power capability.<\/span><\/p>\n

                            Question 214.<\/b><\/p>\n

                            Which design practice most directly reduces the chance of adjacent-channel interference in the 2.4 GHz band?<\/b><\/p>\n

                              \n
                            1. <\/b> Use channels 1, 2, and 3 repeatedly<\/span>
                              \n<\/span>2.<\/b> Use an appropriate non-overlapping channel plan such as 1, 6, and 11 where permitted<\/span>
                              \n<\/span>3.<\/b> Configure every AP on channel 6<\/span>
                              \n<\/span>4.<\/b> Use maximum transmit power everywhere<\/span><\/li>\n<\/ol>\n

                              Correct Answer: 2. Use an appropriate non-overlapping channel plan such as 1, 6, and 11 where permitted<\/b><\/p>\n

                              Explanation:<\/b><\/p>\n

                              The 2.4 GHz band has limited spectrum and closely spaced channels. In many regulatory domains, channels 1, 6, and 11 are commonly used for 20 MHz operation because they avoid overlapping one another. Using partially overlapping channels such as 1, 2, and 3 can create adjacent-channel interference, which is often more damaging than normal same-channel contention. Placing every AP on one channel would create excessive co-channel contention. Channel planning must also consider regulatory rules, neighboring networks, client support, and actual site conditions rather than relying only on a simple repeated pattern.<\/span><\/p>\n

                              Question 215.<\/b><\/p>\n

                              Which type of interference occurs when multiple WLANs use the same channel and can hear one another?<\/b><\/p>\n

                                \n
                              1. <\/b> Adjacent-channel interference<\/span>
                                \n<\/span>2.<\/b> Thermal interference only<\/span>
                                \n<\/span>3.<\/b> Co-channel contention<\/span>
                                \n<\/span>4.<\/b> Polarization loss<\/span><\/li>\n<\/ol>\n

                                Correct Answer: 3. Co-channel contention<\/b><\/p>\n

                                Explanation:<\/b><\/p>\n

                                When multiple WLAN devices use the same channel and can detect one another, they generally share the channel through normal CSMA\/CA contention. This is commonly described as co-channel contention or co-channel interference. Devices defer and wait for transmission opportunities, so the primary impact is reduced available airtime. Adjacent-channel interference occurs when overlapping channels interfere in a less coordinated manner and can be more destructive. Polarization loss and thermal noise describe different RF effects. Proper channel reuse aims to reduce the number of same-channel cells that strongly overlap while still maintaining the required coverage and capacity.<\/span><\/p>\n

                                Question 216.<\/b><\/p>\n

                                Which WLAN configuration change is most likely to reduce unnecessary management-frame overhead?<\/b><\/p>\n

                                  \n
                                1. <\/b> Add more SSIDs<\/span>
                                  \n<\/span>2.<\/b> Lower every basic rate to the minimum possible<\/span>
                                  \n<\/span>3.<\/b> Increase probe traffic<\/span>
                                  \n<\/span>4.<\/b> Reduce the number of advertised SSIDs**<\/span><\/li>\n<\/ol>\n

                                  Correct Answer: 4. Reduce the number of advertised SSIDs<\/b><\/p>\n

                                  Explanation:<\/b><\/p>\n

                                  Each advertised BSS generates periodic beacon traffic and can contribute to probe-response overhead. Therefore, reducing unnecessary SSIDs can reclaim airtime for useful client data. This benefit is particularly important when beacons are transmitted at low basic rates, because each beacon takes longer to occupy the channel. Adding SSIDs and lowering basic rates generally increase overhead rather than reduce it. Modern enterprise WLANs often use identity-based policy, VLAN assignment, or role-based controls to provide segmentation without creating a large number of separate SSIDs. Airtime efficiency should always be considered when expanding the logical WLAN design.<\/span><\/p>\n

                                  Question 217.<\/b><\/p>\n

                                  Which capability allows multiple Ethernet-like networks to be represented over the same WLAN infrastructure while preserving logical separation?<\/b><\/p>\n

                                    \n
                                  1. <\/b> Multiple SSIDs mapped to different VLANs<\/span>
                                    \n<\/span>2.<\/b> One BSSID with no segmentation<\/span>
                                    \n<\/span>3.<\/b> Disabling association<\/span>
                                    \n<\/span>4.<\/b> Removing all authentication<\/span><\/li>\n<\/ol>\n

                                    Correct Answer: 1. Multiple SSIDs mapped to different VLANs<\/b><\/p>\n

                                    Explanation:<\/b><\/p>\n

                                    Different SSIDs can be mapped to different VLANs to provide logical separation between groups such as employees, guests, or specialized devices. This is a common WLAN design approach, though too many SSIDs create management overhead and should be avoided where policy-based segmentation can achieve the same objective more efficiently. A BSSID identifies a specific Basic Service Set, while disabling association or authentication does not provide useful segmentation. WLAN architects should balance logical separation requirements against RF efficiency, security, user experience, and operational complexity.<\/span><\/p>\n

                                    Question 218.<\/b><\/p>\n

                                    Which troubleshooting tool is most appropriate for verifying whether a client’s EAP authentication exchange is failing before successful network access?<\/b><\/p>\n

                                      \n
                                    1. <\/b> Spectrum analyzer only<\/span>
                                      \n<\/span>2.<\/b> Wireless protocol analyzer together with RADIUS logs<\/span>
                                      \n<\/span>3.<\/b> Cable length tester only<\/span>
                                      \n<\/span>4.<\/b> DNS lookup utility only<\/span><\/li>\n<\/ol>\n

                                      Correct Answer: 2. Wireless protocol analyzer together with RADIUS logs<\/b><\/p>\n

                                      Explanation:<\/b><\/p>\n

                                      Enterprise Wi-Fi authentication problems often require visibility into both the wireless exchange and the backend authentication service. A protocol analyzer can show 802.11 and EAP-related frame sequences, while RADIUS logs can reveal authentication policy decisions, certificate problems, rejected credentials, or identity-store failures. A spectrum analyzer can identify interference but cannot explain most EAP failures. Cable and DNS tools operate at different layers. Correlating packet captures with timestamps and RADIUS records is especially useful because it helps determine whether failure occurs at the client, authenticator, network path, certificate-validation stage, or authentication server.<\/span><\/p>\n

                                      Question 219.<\/b><\/p>\n

                                      Which validation approach is most appropriate when an organization must prove that warehouse scanners can roam reliably throughout a facility?<\/b><\/p>\n

                                        \n
                                      1. <\/b> Test with the actual or representative scanner models while following normal work paths<\/span>
                                        \n<\/span>2.<\/b> Test only with a high-end laptop near the APs<\/span>
                                        \n<\/span>3.<\/b> Review only the predictive model<\/span>
                                        \n<\/span>4.<\/b> Check only AP uptime<\/span><\/li>\n<\/ol>\n

                                        Correct Answer: 1. Test with the actual or representative scanner models while following normal work paths<\/b><\/p>\n

                                        Explanation:<\/b><\/p>\n

                                        Client devices vary substantially in antenna design, transmit power, receive sensitivity, supported bands, scanning behavior, and roaming algorithms. Therefore, testing only with a survey laptop can produce misleading results if the production warehouse scanners behave differently. Validation should use the real scanners or representative models, follow normal walking or vehicle paths, and measure roaming continuity, RSSI, SNR, retries, application performance, and authentication delay where appropriate. Predictive models and infrastructure uptime are useful but cannot prove client-specific roaming reliability. Real-device testing provides the strongest evidence that the WLAN supports the intended operational workflow.<\/span><\/p>\n

                                        Question 220.<\/b><\/p>\n

                                        Users report poor performance only in one area where RSSI is strong, SNR is good, and channel utilization suddenly spikes whenever nearby machinery is activated. What should be investigated first?<\/b><\/p>\n

                                          \n
                                        1. <\/b> DHCP lease duration<\/span>
                                          \n<\/span>2.<\/b> SSID naming conventions<\/span>
                                          \n<\/span>3.<\/b> RADIUS password policy<\/span>
                                          \n<\/span>4.<\/b> Non-Wi-Fi RF interference using spectrum analysis**<\/span><\/li>\n<\/ol>\n

                                          Correct Answer: 4. Non-Wi-Fi RF interference using spectrum analysis<\/b><\/p>\n

                                          Explanation:<\/b><\/p>\n

                                          If RSSI and SNR appear acceptable but channel utilization spikes in direct correlation with nearby machinery, non-Wi-Fi RF interference is a strong possibility. A spectrum analyzer is the correct tool because it can reveal RF energy that cannot be decoded as standard 802.11 traffic. Industrial equipment, motors, wireless control systems, poorly shielded electronics, or other transmitters may affect WLAN frequencies. DHCP, SSID names, and RADIUS policy would not normally correlate with machinery activation. The troubleshooting process should reproduce the event, observe the spectrum before and during activation, and then determine whether mitigation requires channel changes, equipment repair, shielding, relocation, or other environmental adjustments.<\/span><\/p>\n

                                           <\/p>\n","protected":false},"excerpt":{"rendered":"

                                          View Full CWNP CWNA-109 Exam Dumps and Practice Test Dumps   Question 201. Which RF measurement expresses antenna gain relative to an ideal isotropic radiator? dBi 2. dBm 3. dB 4. RSSI Correct Answer: 1. dBi Explanation: dBi expresses antenna gain relative to an ideal isotropic radiator, which is a theoretical antenna that radiates equally […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[1648,1647],"tags":[],"_links":{"self":[{"href":"https:\/\/www.examlabs.com\/certification\/wp-json\/wp\/v2\/posts\/18052"}],"collection":[{"href":"https:\/\/www.examlabs.com\/certification\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.examlabs.com\/certification\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.examlabs.com\/certification\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.examlabs.com\/certification\/wp-json\/wp\/v2\/comments?post=18052"}],"version-history":[{"count":2,"href":"https:\/\/www.examlabs.com\/certification\/wp-json\/wp\/v2\/posts\/18052\/revisions"}],"predecessor-version":[{"id":18059,"href":"https:\/\/www.examlabs.com\/certification\/wp-json\/wp\/v2\/posts\/18052\/revisions\/18059"}],"wp:attachment":[{"href":"https:\/\/www.examlabs.com\/certification\/wp-json\/wp\/v2\/media?parent=18052"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.examlabs.com\/certification\/wp-json\/wp\/v2\/categories?post=18052"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.examlabs.com\/certification\/wp-json\/wp\/v2\/tags?post=18052"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}