{"id":23112,"date":"2026-09-26T11:48:38","date_gmt":"2026-09-26T11:48:38","guid":{"rendered":"https:\/\/www.examlabs.com\/certification\/?p=23112"},"modified":"2026-09-26T11:48:38","modified_gmt":"2026-09-26T11:48:38","slug":"nadca-ascs-practice-test-questions-and-exam-dumps-part17-q321-340","status":"publish","type":"post","link":"https:\/\/www.examlabs.com\/certification\/nadca-ascs-practice-test-questions-and-exam-dumps-part17-q321-340\/","title":{"rendered":"NADCA ASCS Practice Test Questions and Exam Dumps Part17 Q321-340"},"content":{"rendered":"

View Full <\/b>NADCA ASCS Exam Dumps<\/b><\/a> and Practice Test Dumps.<\/b><\/p>\n


\n<\/b>Question 321. What should contractor equipment undergo before entering a job site<\/b><\/p>\n

    \n
  1. <\/b> Painting<\/span><\/li>\n
  2. <\/b> Replacement<\/span><\/li>\n
  3. <\/b> Cleaning and inspection<\/span><\/li>\n
  4. <\/b> Storage outdoors<\/span><\/li>\n<\/ol>\n

    Correct Answer: 3. Cleaning and inspection<\/b><\/p>\n

    Explanation:<\/b><\/p>\n

    HVAC cleaning equipment should be cleaned and inspected before it is brought onto the work site. This helps ensure that vacuum equipment, hoses, brushes, tools, and other devices do not introduce contaminants into the building or HVAC system. NADCA also requires contractor equipment to remain in good working order throughout the project. Equipment condition is part of contamination control as well as worker safety. A dirty vacuum hose or poorly maintained tool could transfer material from a previous project, while damaged electrical or mechanical equipment could create additional hazards.<\/span><\/p>\n

    Question 322. Which item is included in NADCA equipment maintenance requirements<\/b><\/p>\n

      \n
    1. <\/b> Vacuum collection hoses<\/span><\/li>\n
    2. <\/b> Building furniture<\/span><\/li>\n
    3. <\/b> Customer vehicles<\/span><\/li>\n
    4. <\/b> Roof drainage<\/span><\/li>\n<\/ol>\n

      Correct Answer: 1. Vacuum collection hoses<\/b><\/p>\n

      Explanation:<\/b><\/p>\n

      Vacuum collection hoses are among the equipment items NADCA identifies as requiring proper maintenance. Other examples include vacuum collection units, power tools, pressurized air sources, electrical cords, plugs, pneumatic lines, brushes, ladders, and hand tools. Cleaning equipment must remain functional and safe because equipment failure can reduce contaminant control or expose workers to unnecessary hazards. Hoses should therefore be inspected for damage, restrictions, loose connections, and conditions that could reduce collection effectiveness. Maintaining all project equipment supports both effective source removal and safe field operations.<\/span><\/p>\n

      Question 323. What should be considered a priority on every HVAC cleaning project<\/b><\/p>\n

        \n
      1. <\/b> Increasing duct size<\/span><\/li>\n
      2. <\/b> Raising fan speed<\/span><\/li>\n
      3. <\/b> Reducing filter efficiency<\/span><\/li>\n
      4. <\/b> Protecting workers occupants and property<\/span><\/li>\n<\/ol>\n

        Correct Answer: 4. Protecting workers occupants and property<\/b><\/p>\n

        Explanation:<\/b><\/p>\n

        NADCA emphasizes that engineering controls should protect workers, building occupants, and property while also preventing cross contamination. HVAC cleaning can disturb accumulated dust, biological material, insulation particles, and other contaminants. Without proper controls, material removed from one area may spread into occupied spaces or expose technicians unnecessarily. Appropriate protection can include negative pressure, containment, protective coverings, filtration, personal protective equipment, and controlled work practices. Safety and contaminant control should therefore be incorporated into project planning before cleaning begins rather than added only after a problem occurs.<\/span><\/p>\n

        Question 324. What does source control address<\/b><\/p>\n

          \n
        1. <\/b> Outdoor temperature<\/span><\/li>\n
        2. <\/b> Contamination at its origin<\/span><\/li>\n
        3. <\/b> Refrigerant pressure<\/span><\/li>\n
        4. <\/b> Customer billing<\/span><\/li>\n<\/ol>\n

          Correct Answer: 2. Contamination at its origin<\/b><\/p>\n

          Explanation:<\/b><\/p>\n

          Source control focuses on controlling contamination where it originates so it does not spread through the HVAC system or surrounding building. NADCA lists source control among the engineering controls that may be used to prevent cross contamination. During HVAC cleaning this can involve isolating the contaminated component, applying negative pressure, capturing debris as it is loosened, and preventing contaminants from entering unaffected areas. Source control works best as part of an overall strategy that can also include barriers, HEPA filtration, detailed cleaning, and appropriate temperature or humidity management when project conditions require them.<\/span><\/p>\n

          Question 325. What is the purpose of dust suppression during HVAC restoration<\/b><\/p>\n

            \n
          1. <\/b> Reduce airborne particulate release<\/span><\/li>\n
          2. <\/b> Increase airflow velocity<\/span><\/li>\n
          3. <\/b> Raise system temperature<\/span><\/li>\n
          4. <\/b> Reduce duct thickness<\/span><\/li>\n<\/ol>\n

            Correct Answer: 1. Reduce airborne particulate release<\/b><\/p>\n

            Explanation:<\/b><\/p>\n

            Dust suppression methods are engineering controls used to reduce the amount of particulate material becoming airborne during cleaning or restoration activities. NADCA includes dust suppression among the controls that may be used to prevent cross contamination. The exact method depends on the contamination, material, building conditions, and work being performed. Dust suppression does not replace source removal because contaminants still need to be physically removed from HVAC surfaces. Instead, it supports safer removal by reducing uncontrolled particle movement while technicians perform cleaning or restoration procedures.<\/span><\/p>\n

            Question 326. What is the purpose of isolation barriers<\/b><\/p>\n

              \n
            1. <\/b> Increase refrigerant charge<\/span><\/li>\n
            2. <\/b> Improve thermostat accuracy<\/span><\/li>\n
            3. <\/b> Separate contaminated areas from clean areas<\/span><\/li>\n
            4. <\/b> Increase blower speed<\/span><\/li>\n<\/ol>\n

              Correct Answer: 3. Separate contaminated areas from clean areas<\/b><\/p>\n

              Explanation:<\/b><\/p>\n

              Isolation barriers separate the work area from unaffected portions of the building and help prevent contaminants from migrating during cleaning and restoration. NADCA lists isolation barriers as an engineering control used for cross contamination prevention. Temporary barriers become particularly important when ordinary Level 1 controls are not sufficient for project conditions. Barriers should work together with pressure control and appropriate filtration rather than simply creating a physical enclosure with no airflow strategy. Proper isolation helps protect occupants, furnishings, building surfaces, and previously cleaned areas throughout the project.<\/span><\/p>\n

              Question 327. What may be controlled as part of HVAC cleaning engineering controls<\/b><\/p>\n

                \n
              1. <\/b> Employee wages<\/span><\/li>\n
              2. <\/b> Temperature and humidity<\/span><\/li>\n
              3. <\/b> Property taxes<\/span><\/li>\n
              4. <\/b> Equipment purchase price<\/span><\/li>\n<\/ol>\n

                Correct Answer: 2. Temperature and humidity<\/b><\/p>\n

                Explanation:<\/b><\/p>\n

                NADCA identifies temperature and humidity control among the engineering measures that may be used during HVAC cleaning and restoration. Environmental conditions can influence moisture behavior, drying, worker comfort, microbial concerns, and the performance of certain cleaning or restoration materials. The degree of control required depends on the specific project. Temperature and humidity management is not needed in exactly the same way on every job, but ASCS professionals should recognize it as a possible part of an overall contamination and restoration strategy when environmental conditions affect project safety or quality.<\/span><\/p>\n

                Question 328. What should be monitored when fuel powered equipment is used<\/b><\/p>\n

                  \n
                1. <\/b> Customer payment status<\/span><\/li>\n
                2. <\/b> Filter color<\/span><\/li>\n
                3. <\/b> Duct label size<\/span><\/li>\n
                4. <\/b> Equipment location and combustion emissions<\/span><\/li>\n<\/ol>\n

                  Correct Answer: 4. Equipment location and combustion emissions<\/b><\/p>\n

                  Explanation:<\/b><\/p>\n

                  Fuel powered cleaning equipment can produce combustion emissions that must not enter occupied areas. NADCA requires the equipment location to be monitored and managed during the project to prevent combustion products from being introduced into indoor spaces. Contractors should consider doors, windows, air intakes, exhaust direction, and other pathways through which emissions could reenter the building. Equipment condition and maintenance are also important. The objective is to avoid creating an indoor air quality or safety problem while operating equipment intended to support HVAC cleaning.<\/span><\/p>\n

                  Question 329. What should a technician do if an HVAC component is heavily contaminated but fragile<\/b><\/p>\n

                    \n
                  1. <\/b> Select a suitable low damage cleaning method<\/span><\/li>\n
                  2. <\/b> Use maximum agitation<\/span><\/li>\n
                  3. <\/b> Apply coating before cleaning<\/span><\/li>\n
                  4. <\/b> Ignore the component<\/span><\/li>\n<\/ol>\n

                    Correct Answer: 1. Select a suitable low damage cleaning method<\/b><\/p>\n

                    Explanation:<\/b><\/p>\n

                    The cleaning method should remove contamination without damaging the HVAC component. Fragile surfaces may not tolerate aggressive brushing, high pressure air, power washing, or other strong methods. NADCA’s current ACR framework recognizes several cleaning approaches because system materials and contamination conditions vary. The technician should evaluate the surface condition and choose a method appropriate for that component. If acceptable cleanliness cannot be achieved safely, restoration or replacement may be more appropriate. Cleaning effectiveness and preservation of system integrity must be considered together.<\/span><\/p>\n

                    Question 330. Why should filters and air bypass be inspected together<\/b><\/p>\n

                      \n
                    1. <\/b> Bypass can allow unfiltered air downstream<\/span><\/li>\n
                    2. <\/b> Filters control refrigerant<\/span><\/li>\n
                    3. <\/b> Bypass increases condensate drainage<\/span><\/li>\n
                    4. <\/b> Filters determine duct dimensions<\/span><\/li>\n<\/ol>\n

                      Correct Answer: 4. Bypass can allow unfiltered air downstream<\/b><\/p>\n

                      Explanation:<\/b><\/p>\n

                      NADCA includes both filters and air bypass in the air handling unit cleanliness inspection. A filter can appear acceptable while gaps around the rack or housing allow air to travel around the filter media. This bypass can carry particulate matter into coils, fans, ducts, and other downstream components. Inspecting both the filter and the surrounding sealing condition provides a more complete picture of system cleanliness and contamination pathways. An ASCS technician should therefore evaluate whether air is actually passing through the intended filtration rather than looking only at the filter media itself.<\/span><\/p>\n

                      Question 331. Which AHU component should be checked for sealing condition<\/b><\/p>\n

                        \n
                      1. <\/b> Roof membrane<\/span><\/li>\n
                      2. <\/b> Door gaskets<\/span><\/li>\n
                      3. <\/b> Plumbing traps<\/span><\/li>\n
                      4. <\/b> Ceiling tiles<\/span><\/li>\n<\/ol>\n

                        Correct Answer: 2. Door gaskets<\/b><\/p>\n

                        Explanation:<\/b><\/p>\n

                        Door gaskets are included among the air handling unit components NADCA recommends inspecting. Gaskets help maintain proper closure of access doors and can reduce unwanted air leakage when they are in good condition. Damaged, missing, or deteriorated gaskets can affect system integrity and may permit unfiltered air or contaminants to enter the unit. An AHU inspection should therefore include general unit integrity as well as filters, coils, drain pans, fans, dampers, insulation, and gaskets. Observed damage should be documented so appropriate corrective action can be considered.<\/span><\/p>\n

                        Question 332. Which system is part of an AHU cleanliness inspection<\/b><\/p>\n

                          \n
                        1. <\/b> Domestic water system<\/span><\/li>\n
                        2. <\/b> Fire sprinkler piping only<\/span><\/li>\n
                        3. <\/b> Humidification system<\/span><\/li>\n
                        4. <\/b> Elevator ventilation only<\/span><\/li>\n<\/ol>\n

                          Correct Answer: 3. Humidification system<\/b><\/p>\n

                          Explanation:<\/b><\/p>\n

                          NADCA includes humidification systems within the components that should be considered during an air handling unit cleanliness inspection. Humidifiers intentionally introduce moisture into the air stream, so their condition can be important when assessing cleanliness and moisture management. The technician should examine accessible surfaces, associated components, and signs of contamination or improper moisture conditions. Humidification equipment should not be treated as an unrelated mechanical device because it operates directly within the HVAC air path. Assessment findings help determine whether cleaning, maintenance, or further professional attention is required.<\/span><\/p>\n

                          Question 333. What should be inspected in a supply air duct system besides the ducts<\/b><\/p>\n

                            \n
                          1. <\/b> Mixing boxes and reheat coils<\/span><\/li>\n
                          2. <\/b> Sewer lines<\/span><\/li>\n
                          3. <\/b> Roof drains<\/span><\/li>\n
                          4. <\/b> Building foundations<\/span><\/li>\n<\/ol>\n

                            Correct Answer: 1. Mixing boxes and reheat coils<\/b><\/p>\n

                            Explanation:<\/b><\/p>\n

                            A supply air inspection should include more than the main duct surfaces. NADCA identifies controls, mixing or control boxes, reheat coils, and other internal components as part of the supply air system inspection. These devices are exposed to the same air stream and can accumulate contamination. Leaving them out of the assessment can produce an incomplete understanding of system condition. An ASCS technician should follow the airflow path and evaluate the relevant components within the defined scope rather than considering ductwork as an isolated part of the HVAC system.<\/span><\/p>\n

                            Question 334. What is included in a return air duct inspection<\/b><\/p>\n

                              \n
                            1. <\/b> Boiler water piping<\/span><\/li>\n
                            2. <\/b> Outdoor lighting<\/span><\/li>\n
                            3. <\/b> Refrigerant cylinders<\/span><\/li>\n
                            4. <\/b> Return plenums and grilles<\/span><\/li>\n<\/ol>\n

                              Correct Answer: 4. Return plenums and grilles<\/b><\/p>\n

                              Explanation:<\/b><\/p>\n

                              NADCA states that a return air duct cleanliness inspection includes return ducts, dampers, return plenums, and grilles. These components form part of the path that carries air back from occupied spaces toward the air handling equipment. Dust and debris can accumulate at grilles and within plenums before reaching filters. Evaluating the full return path helps identify contamination and potential maintenance issues more accurately than looking at one accessible duct section. Understanding system airflow is therefore important when selecting representative inspection locations.<\/span><\/p>\n

                              Question 335. Which exhaust system is part of an overall HVAC cleanliness inspection<\/b><\/p>\n

                                \n
                              1. <\/b> Bathroom exhaust<\/span><\/li>\n
                              2. <\/b> Plumbing vent only<\/span><\/li>\n
                              3. <\/b> Sewer exhaust only<\/span><\/li>\n
                              4. <\/b> Chimney flue only<\/span><\/li>\n<\/ol>\n

                                Correct Answer: 1. Bathroom exhaust<\/b><\/p>\n

                                Explanation:<\/b><\/p>\n

                                NADCA identifies general exhaust, bathroom exhaust, and heat recovery exhaust as parts of the ventilation system that should be considered during an overall HVAC cleanliness inspection. Exhaust systems can accumulate lint, dust, moisture related contamination, or other debris depending on how the space is used. They should not automatically be excluded simply because they discharge air rather than supply it. An ASCS professional should understand the complete ventilation system and determine which exhaust components fall within the inspection or cleaning scope.<\/span><\/p>\n

                                Question 336. What may happen if only ducts are cleaned but contaminated components remain<\/b><\/p>\n

                                  \n
                                1. <\/b> Refrigerant pressure increases<\/span><\/li>\n
                                2. <\/b> The system can become recontaminated<\/span><\/li>\n
                                3. <\/b> Ducts become larger<\/span><\/li>\n
                                4. <\/b> Filters become unnecessary<\/span><\/li>\n<\/ol>\n

                                  Correct Answer: 2. The system can become recontaminated<\/b><\/p>\n

                                  Explanation:<\/b><\/p>\n

                                  NADCA explains that air duct cleaning should actually be viewed as HVAC system cleaning. If ducts are cleaned while contaminated coils, blowers, plenums, registers, or other components remain dirty, those components can contribute to recontamination of the cleaned system. This is why NADCA recommends considering the entire system, including ducts, coils, drain pans, registers, grilles, plenums, blower assemblies, heat exchangers, filters, and air cleaners. The final project scope should still reflect actual conditions, but partial cleaning should not be mistaken for comprehensive HVAC cleaning.<\/span><\/p>\n

                                  Question 337. What are the two key components of proper HVAC cleaning<\/b><\/p>\n

                                    \n
                                  1. <\/b> Heating and cooling<\/span><\/li>\n
                                  2. <\/b> Filtration and humidification<\/span><\/li>\n
                                  3. <\/b> Loosening and collecting contaminants<\/span><\/li>\n
                                  4. <\/b> Painting and sealing<\/span><\/li>\n<\/ol>\n

                                    Correct Answer: 3. Loosening and collecting contaminants<\/b><\/p>\n

                                    Explanation:<\/b><\/p>\n

                                    NADCA describes proper HVAC cleaning as involving two key elements. Contaminants must first be broken loose from the surfaces where they have accumulated, and then those contaminants must be collected and removed from the system. Agitation devices can include brushes, air tools, and other mechanical methods, while vacuum collection equipment captures the loosened material. Performing only one step is incomplete. Agitation without collection can spread contamination, while collection without adequately loosening adhered debris may leave material behind. These two activities work together as part of source removal cleaning.<\/span><\/p>\n

                                    Question 338. What should happen if a contractor discovers contamination outside the agreed scope<\/b><\/p>\n

                                      \n
                                    1. <\/b> Hide the finding<\/span><\/li>\n
                                    2. <\/b> Clean it without informing anyone<\/span><\/li>\n
                                    3. <\/b> Ignore it permanently<\/span><\/li>\n
                                    4. <\/b> Document it and discuss scope changes<\/span><\/li>\n<\/ol>\n

                                      Correct Answer: 4. Document it and discuss scope changes<\/b><\/p>\n

                                      Explanation:<\/b><\/p>\n

                                      Unexpected contamination should be documented and communicated to the customer or project representative. The existing scope may need to be revised if additional components require assessment, cleaning, containment, or restoration. ACR emphasizes comprehensive scope development and project coordination because actual system conditions can differ from what was expected before work begins. Expanding work without communication can create disputes, while ignoring contamination can leave the system incomplete. Clear documentation allows the parties to determine the appropriate next action based on actual findings and project requirements.<\/span><\/p>\n

                                      Question 339. What should source removal accomplish before chemical treatment is considered<\/b><\/p>\n

                                        \n
                                      1. <\/b> Physical removal of debris and contaminants<\/span><\/li>\n
                                      2. <\/b> Higher fan speed<\/span><\/li>\n
                                      3. <\/b> Increased humidity<\/span><\/li>\n
                                      4. <\/b> Lower duct pressure<\/span><\/li>\n<\/ol>\n

                                        Correct Answer: 1. Physical removal of debris and contaminants<\/b><\/p>\n

                                        Explanation:<\/b><\/p>\n

                                        NADCA defines source removal as the physical removal of contaminants and debris from internal HVAC surfaces. Chemical products are not necessary to accomplish source removal, although suitable cleaning compounds may assist certain cleaning procedures such as work on coils or hard surfaces. Chemical application should never be treated as a substitute for removing the contamination itself. The system owner ultimately decides whether a chemical product is applied, and the application must comply with appropriate product instructions and legal requirements.<\/span><\/p>\n

                                        Question 340. What is the best overall purpose of NADCA engineering controls<\/b><\/p>\n

                                          \n
                                        1. <\/b> Increase system capacity<\/span><\/li>\n
                                        2. <\/b> Prevent cross contamination and protect people<\/span><\/li>\n
                                        3. <\/b> Replace all cleaning methods<\/span><\/li>\n
                                        4. <\/b> Increase equipment speed<\/span><\/li>\n<\/ol>\n

                                          Correct Answer: 2. Prevent cross contamination and protect people<\/b><\/p>\n

                                          Explanation:<\/b><\/p>\n

                                          Engineering controls are designed to prevent cross contamination while protecting workers, building occupants, and property during HVAC cleaning and restoration. NADCA identifies measures such as source control, barriers, pressure differentials, HEPA filtration, dust suppression, detailed cleaning, and environmental control. These measures support the source removal process by keeping disturbed contamination within a controlled area until it can be captured and removed. Appropriate engineering controls are a fundamental part of professional HVAC cleaning because effective cleaning should improve the system without creating new exposure or contamination problems elsewhere in the building.<\/span><\/p>\n","protected":false},"excerpt":{"rendered":"

                                          View Full NADCA ASCS Exam Dumps and Practice Test Dumps. Question 321. What should contractor equipment undergo before entering a job site Painting Replacement Cleaning and inspection Storage outdoors Correct Answer: 3. Cleaning and inspection Explanation: HVAC cleaning equipment should be cleaned and inspected before it is brought onto the work site. This helps ensure […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[1648,1647],"tags":[],"_links":{"self":[{"href":"https:\/\/www.examlabs.com\/certification\/wp-json\/wp\/v2\/posts\/23112"}],"collection":[{"href":"https:\/\/www.examlabs.com\/certification\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.examlabs.com\/certification\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.examlabs.com\/certification\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.examlabs.com\/certification\/wp-json\/wp\/v2\/comments?post=23112"}],"version-history":[{"count":1,"href":"https:\/\/www.examlabs.com\/certification\/wp-json\/wp\/v2\/posts\/23112\/revisions"}],"predecessor-version":[{"id":23113,"href":"https:\/\/www.examlabs.com\/certification\/wp-json\/wp\/v2\/posts\/23112\/revisions\/23113"}],"wp:attachment":[{"href":"https:\/\/www.examlabs.com\/certification\/wp-json\/wp\/v2\/media?parent=23112"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.examlabs.com\/certification\/wp-json\/wp\/v2\/categories?post=23112"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.examlabs.com\/certification\/wp-json\/wp\/v2\/tags?post=23112"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}