{"id":23210,"date":"2026-09-26T12:16:18","date_gmt":"2026-09-26T12:16:18","guid":{"rendered":"https:\/\/www.examlabs.com\/certification\/?p=23210"},"modified":"2026-09-26T12:16:18","modified_gmt":"2026-09-26T12:16:18","slug":"cisco-ccnp-enterprise-300-440-practice-test-questions-and-exam-dumps-part-6-q101-120","status":"publish","type":"post","link":"https:\/\/www.examlabs.com\/certification\/cisco-ccnp-enterprise-300-440-practice-test-questions-and-exam-dumps-part-6-q101-120\/","title":{"rendered":"Cisco CCNP Enterprise 300-440 Practice Test Questions and Exam Dumps Part 6 Q101-120"},"content":{"rendered":"

View Full <\/b>Cisco CCNP Enterprise 300-440 Exam Dumps <\/b><\/a>\u00a0and Practice Test Dumps<\/b><\/h1>\n

 <\/p>\n

Question 101. A company connects its private data center to a cloud provider using an IPsec tunnel. The cloud subnet is reachable from the data center, but return traffic from the cloud consistently follows a different path. Which design consideration should be addressed first?<\/b><\/p>\n

    \n
  1. <\/b> Increase the IPsec encryption lifetime<\/span><\/li>\n
  2. <\/b> Verify symmetric routing and the cloud-side return route<\/span><\/li>\n
  3. <\/b> Disable BGP keepalives<\/span><\/li>\n
  4. <\/b> Replace IPsec with GRE<\/span><\/li>\n<\/ol>\n

    Correct Answer: 2. Verify symmetric routing and the cloud-side return route<\/b><\/p>\n

    Explanation :-<\/b><\/p>\n

    Cloud connectivity problems can occur when the forward and return paths use different routing domains or connectivity mechanisms. The IPsec tunnel may be operational while the cloud environment sends return traffic through another gateway, VPN, or Internet path. Verifying the cloud-side route and ensuring that the expected return path points toward the correct tunnel or attachment is therefore an important troubleshooting step. Increasing encryption lifetime or disabling BGP keepalives does not address asymmetric routing. Replacing IPsec with GRE is also unnecessary unless a specific design requirement exists.<\/span><\/p>\n

    Question 102. An organization requires a cloud connection that must continue operating when one physical provider circuit fails. Which design approach directly addresses this requirement?<\/b><\/p>\n

      \n
    1. <\/b> Increase the IPsec rekey interval<\/span><\/li>\n
    2. <\/b> Use a single high-bandwidth circuit<\/span><\/li>\n
    3. <\/b> Disable route advertisements on the backup path<\/span><\/li>\n
    4. <\/b> Implement redundant connectivity with independent paths<\/span><\/li>\n<\/ol>\n

      Correct Answer: 4. Implement redundant connectivity with independent paths<\/b><\/p>\n

      Explanation :-<\/b><\/p>\n

      Resiliency requires connectivity that can survive a failure of an individual component or path. Using independent circuits, providers, or connectivity paths allows routing or tunnel mechanisms to move traffic to an alternate path when the primary connection becomes unavailable. Simply increasing bandwidth does not provide redundancy. Similarly, changing IPsec timers or disabling advertisements can reduce operational flexibility rather than improve resilience. The exact implementation depends on the cloud architecture, but the fundamental design principle is to avoid a single physical or logical connectivity dependency.<\/span><\/p>\n

      Question 103. A network engineer wants the enterprise edge router to exchange cloud subnet routes dynamically with a cloud-connected routing domain. Which protocol is commonly appropriate when the cloud environment supports dynamic external routing?<\/b><\/p>\n

        \n
      1. <\/b> BGP<\/span><\/li>\n
      2. <\/b> STP<\/span><\/li>\n
      3. <\/b> CDP<\/span><\/li>\n
      4. <\/b> LLDP<\/span><\/li>\n<\/ol>\n

        Correct Answer: 1. BGP<\/b><\/p>\n

        Explanation :-<\/b><\/p>\n

        BGP is commonly used for exchanging routes between autonomous systems and is frequently supported for cloud connectivity. It allows the enterprise edge to dynamically learn cloud prefixes and advertise selected enterprise prefixes toward the cloud environment. This is particularly useful when route changes, redundancy, or multiple prefixes must be managed dynamically. STP is a Layer 2 loop-prevention protocol and is not used for Internet-style Layer 3 route exchange. CDP and LLDP are neighbor-discovery protocols rather than routing protocols. The exact BGP configuration depends on the cloud provider and connectivity architecture.<\/span><\/p>\n

        Question 104. A cloud-connected router learns two routes to the same destination prefix. One route is learned through BGP and another through OSPF. Assuming normal administrative distances and no policy changes, which route is generally preferred?<\/b><\/p>\n

          \n
        1. <\/b> OSPF because it is an IGP<\/span><\/li>\n
        2. <\/b> BGP because it always has the lowest administrative distance<\/span><\/li>\n
        3. <\/b> OSPF because its administrative distance is lower than external BGP<\/span><\/li>\n
        4. <\/b> The route with the longer prefix length regardless of protocol<\/span><\/li>\n<\/ol>\n

          Correct Answer: 3. OSPF because its administrative distance is lower than external BGP<\/b><\/p>\n

          Explanation :-<\/b><\/p>\n

          When routes to the same prefix length are learned from different routing protocols, administrative distance is considered before protocol-specific route-selection attributes. By default, OSPF has an administrative distance of 110, while external BGP has an administrative distance of 20 on Cisco IOS XE. Therefore, external BGP would normally be preferred over OSPF, making option 3 technically incorrect if the question assumes external BGP. To accurately apply Cisco route selection, the correct answer should instead be external BGP. This illustrates why both the route source and administrative distance must be identified before determining the preferred route.<\/span><\/p>\n

          Question 105. A company needs to send only selected enterprise prefixes to a cloud provider over a BGP session. Which configuration concept should be used to control the outbound advertisements?<\/b><\/p>\n

            \n
          1. <\/b> BGP outbound route filtering or a prefix list<\/span><\/li>\n
          2. <\/b> Spanning-tree port priority<\/span><\/li>\n
          3. <\/b> DHCP relay<\/span><\/li>\n
          4. <\/b> NTP authentication<\/span><\/li>\n<\/ol>\n

            Correct Answer: 1. BGP outbound route filtering or a prefix list<\/b><\/p>\n

            Explanation :-<\/b><\/p>\n

            Route filtering is used to control which prefixes a router advertises to a BGP neighbor. A prefix list combined with a route policy or appropriate BGP policy can restrict advertisements to only the enterprise networks that the cloud environment needs to reach. This improves route control and reduces unnecessary routing information. Spanning Tree controls Layer 2 topology, DHCP relay forwards DHCP requests, and NTP authentication protects time synchronization exchanges. None of those mechanisms determines which IP prefixes are advertised through BGP.<\/span><\/p>\n

            Question 106. A cloud application requires predictable application performance, but the Internet connection has variable latency and packet loss. Which requirement should the network architect emphasize when evaluating connectivity options?<\/b><\/p>\n

              \n
            1. <\/b> Number of DNS records<\/span><\/li>\n
            2. <\/b> MAC address aging<\/span><\/li>\n
            3. <\/b> VLAN naming conventions<\/span><\/li>\n
            4. <\/b> Service-level requirements for latency, loss, and availability<\/span><\/li>\n<\/ol>\n

              Correct Answer: 4. Service-level requirements for latency, loss, and availability<\/b><\/p>\n

              Explanation :-<\/b><\/p>\n

              Applications with strict performance requirements need connectivity evaluated against measurable service characteristics. Latency, packet loss, jitter where relevant, and availability can directly affect application behavior. A connectivity design should therefore consider the service-level requirements and determine whether the selected provider or path can meet them consistently. DNS records, MAC aging, and VLAN naming may be operationally relevant but do not directly establish whether the WAN or cloud connection can deliver the required application performance.<\/span><\/p>\n

              Question 107. A company wants to reduce unnecessary Internet backhaul for users accessing a major SaaS application from branch offices. Which Cisco Catalyst SD-WAN capability is designed to help identify and optimize SaaS traffic paths?<\/b><\/p>\n

                \n
              1. <\/b> OnRamp to SaaS<\/span><\/li>\n
              2. <\/b> Spanning Tree Protocol<\/span><\/li>\n
              3. <\/b> DHCP snooping<\/span><\/li>\n
              4. <\/b> VRRP<\/span><\/li>\n<\/ol>\n

                Correct Answer: 1. OnRamp to SaaS<\/b><\/p>\n

                Explanation :-<\/b><\/p>\n

                Cisco Catalyst SD-WAN OnRamp to SaaS is designed to optimize connectivity toward supported SaaS applications by evaluating available paths and selecting connectivity based on application and performance considerations. This can reduce inefficient backhaul when a branch has a suitable direct Internet path. The capability works within the broader SD-WAN policy and transport architecture. STP, DHCP snooping, and VRRP serve different purposes and do not provide SaaS path optimization. The exact behavior depends on the configured policy, transport availability, and application recognition.<\/span><\/p>\n

                Question 108. An engineer discovers that a BGP session to a cloud peer is established, but expected cloud prefixes are not present in the routing table. Which troubleshooting step is most appropriate?<\/b><\/p>\n

                  \n
                1. <\/b> Replace the router interface<\/span><\/li>\n
                2. <\/b> Disable IPsec immediately<\/span><\/li>\n
                3. <\/b> Verify received routes and inbound BGP policy<\/span><\/li>\n
                4. <\/b> Change the switch hostname<\/span><\/li>\n<\/ol>\n

                  Correct Answer: 3. Verify received routes and inbound BGP policy<\/b><\/p>\n

                  Explanation :-<\/b><\/p>\n

                  A BGP session being established does not guarantee that desired prefixes will be accepted into the local routing table. The engineer should inspect received routes and verify inbound route policies, prefix lists, route maps, or other filtering mechanisms. The cloud peer may be advertising the prefix, but local policy could reject it. Interface replacement or hostname changes do not address route-policy behavior. Disabling IPsec is also inappropriate unless evidence indicates that the underlying transport or tunnel is causing the issue.<\/span><\/p>\n

                  Question 109. A cloud VPN tunnel shows an established security association, but application traffic is still unsuccessful. Which additional information should the engineer examine?<\/b><\/p>\n

                    \n
                  1. <\/b> IPsec traffic counters and encryption\/decryption statistics<\/span><\/li>\n
                  2. <\/b> Switchport description<\/span><\/li>\n
                  3. <\/b> CDP device name<\/span><\/li>\n
                  4. <\/b> Console line password<\/span><\/li>\n<\/ol>\n

                    Correct Answer: 1. IPsec traffic counters and encryption\/decryption statistics<\/b><\/p>\n

                    Explanation :-<\/b><\/p>\n

                    An established IPsec security association confirms that the security negotiation succeeded, but it does not prove that user traffic is successfully traversing the tunnel. Encryption and decryption counters can help determine whether packets are entering and leaving the IPsec processing path. If counters remain unchanged while applications generate traffic, the problem may involve routing, traffic selectors, policy, or another forwarding issue. Interface descriptions, CDP information, and console credentials do not provide the necessary evidence for determining whether IPsec data-plane traffic is actually passing.<\/span><\/p>\n

                    Question 110. A cloud-connected enterprise uses OSPF internally and BGP toward the cloud provider. What is an important consideration when exchanging routes between these protocols?<\/b><\/p>\n

                      \n
                    1. <\/b> OSPF must be disabled whenever BGP is enabled<\/span><\/li>\n
                    2. <\/b> Route redistribution must be controlled to prevent unintended prefixes or routing loops<\/span><\/li>\n
                    3. <\/b> BGP automatically redistributes every OSPF route in both directions<\/span><\/li>\n
                    4. <\/b> OSPF cannot coexist with BGP<\/span><\/li>\n<\/ol>\n

                      Correct Answer: 2. Route redistribution must be controlled to prevent unintended prefixes or routing loops<\/b><\/p>\n

                      Explanation :-<\/b><\/p>\n

                      When OSPF and BGP participate in the same cloud connectivity design, redistribution may be required to exchange selected routes between the routing domains. Uncontrolled redistribution can introduce excessive prefixes, routing loops, or unintended transit behavior. Route filtering, tagging, and carefully defined redistribution policies help control which routes cross the boundary. BGP and OSPF can coexist on the same router, and neither protocol automatically redistributes all routes into the other. A deliberate routing policy is therefore essential for predictable cloud connectivity.<\/span><\/p>\n

                      Question 111. A company requires a cloud connectivity design that can continue forwarding traffic if one of two cloud-facing links fails. Which routing behavior is most useful for this requirement?<\/b><\/p>\n

                        \n
                      1. <\/b> Static routing with no alternate route<\/span><\/li>\n
                      2. <\/b> Dynamic route convergence toward an alternate path<\/span><\/li>\n
                      3. <\/b> Disabling route advertisements<\/span><\/li>\n
                      4. <\/b> Increasing DNS TTL values<\/span><\/li>\n<\/ol>\n

                        Correct Answer: 2. Dynamic route convergence toward an alternate path<\/b><\/p>\n

                        Explanation :-<\/b><\/p>\n

                        Redundant cloud links are most useful when the routing design can detect a failure and select an available alternate path. Dynamic routing protocols can provide route convergence when an active path becomes unavailable, assuming the alternate path is properly advertised and permitted by policy. Static routing can also support failover when supplemented by tracking mechanisms, but a static route without failure detection does not inherently provide effective convergence. DNS TTL values and disabling route advertisements do not provide the required routing failover mechanism.<\/span><\/p>\n

                        Question 112. A cloud provider requires the enterprise to advertise a summarized address block rather than many individual subnet prefixes. What is the primary advantage of this approach?<\/b><\/p>\n

                          \n
                        1. <\/b> It eliminates the need for routing protocols<\/span><\/li>\n
                        2. <\/b> It guarantees zero packet loss<\/span><\/li>\n
                        3. <\/b> It reduces the number of routes exchanged between the environments<\/span><\/li>\n
                        4. <\/b> It encrypts the advertised prefixes<\/span><\/li>\n<\/ol>\n

                          Correct Answer: 3. It reduces the number of routes exchanged between the environments<\/b><\/p>\n

                          Explanation :-<\/b><\/p>\n

                          Route summarization represents multiple contiguous networks with a broader aggregate prefix when the addressing plan permits it. Advertising a summary can reduce the number of routing entries exchanged between an enterprise and a cloud environment, simplifying routing tables and potentially reducing control-plane overhead. Summarization does not provide encryption, guarantee zero packet loss, or eliminate the need for routing protocols. Care must be taken to ensure that the summary accurately represents reachable networks and does not create undesirable blackholing.<\/span><\/p>\n

                          Question 113. A cloud application is sensitive to packet fragmentation across an IPsec connection. Which parameter should the engineer investigate first?<\/b><\/p>\n

                            \n
                          1. <\/b> MTU and packet size handling along the path<\/span><\/li>\n
                          2. <\/b> BGP router ID format<\/span><\/li>\n
                          3. <\/b> OSPF area name<\/span><\/li>\n
                          4. <\/b> DNS search domain<\/span><\/li>\n<\/ol>\n

                            Correct Answer: 1. MTU and packet size handling along the path<\/b><\/p>\n

                            Explanation :-<\/b><\/p>\n

                            IPsec encapsulation adds overhead to packets, which can reduce the effective payload size that can traverse a path without fragmentation. If the underlying path has a smaller MTU, oversized packets may be fragmented or dropped depending on the configuration and protocol behavior. Engineers should therefore investigate MTU, TCP MSS adjustment where appropriate, path MTU discovery, and encapsulation overhead. BGP router IDs, OSPF area identifiers, and DNS search domains do not directly control packet fragmentation.<\/span><\/p>\n

                            Question 114. An organization wants cloud traffic to use a private connectivity path whenever available but use an Internet-based VPN path during an outage. Which design principle should be implemented?<\/b><\/p>\n

                              \n
                            1. <\/b> Use identical routing metrics without tracking<\/span><\/li>\n
                            2. <\/b> Disable dynamic routing<\/span><\/li>\n
                            3. <\/b> Configure a preferred primary path with a controlled backup route<\/span><\/li>\n
                            4. <\/b> Advertise all routes equally through every path<\/span><\/li>\n<\/ol>\n

                              Correct Answer: 3. Configure a preferred primary path with a controlled backup route<\/b><\/p>\n

                              Explanation :-<\/b><\/p>\n

                              A primary-and-backup design requires routing policy that establishes a preferred path while retaining an alternate path for failure conditions. The implementation may use routing attributes, administrative distance, tracking, policy, or other mechanisms appropriate to the architecture. The objective is to ensure normal traffic uses the private path while allowing controlled failover to the VPN path when required. Advertising every route equally without policy can produce unpredictable forwarding behavior rather than deliberate primary\/backup operation.<\/span><\/p>\n

                              Question 115. A cloud-connected router receives a BGP route but does not install it because another route to the same prefix is already installed. Which troubleshooting information is most relevant?<\/b><\/p>\n

                                \n
                              1. <\/b> The router’s hostname<\/span><\/li>\n
                              2. <\/b> The interface description<\/span><\/li>\n
                              3. <\/b> BGP path attributes and the competing route’s source<\/span><\/li>\n
                              4. <\/b> The console terminal length<\/span><\/li>\n<\/ol>\n

                                Correct Answer: 3. BGP path attributes and the competing route’s source<\/b><\/p>\n

                                Explanation :-<\/b><\/p>\n

                                When a BGP-learned prefix is not installed in the routing table, the engineer must determine whether another route is preferred or whether the BGP path itself is being rejected. Relevant information includes the competing route’s protocol, administrative distance, BGP path attributes, next-hop reachability, and local policy. Merely confirming that the prefix was received is insufficient. Hostnames, interface descriptions, and terminal display settings do not explain route-selection behavior. Detailed route inspection helps identify why a particular path is or is not selected.<\/span><\/p>\n

                                Question 116. A company uses SD-WAN application-aware routing for cloud applications. One transport consistently meets latency requirements but occasionally exceeds the packet-loss threshold. What should the policy evaluate?<\/b><\/p>\n

                                  \n
                                1. <\/b> Only the tunnel interface name<\/span><\/li>\n
                                2. <\/b> The configured SLA criteria across available transports<\/span><\/li>\n
                                3. <\/b> The device hostname<\/span><\/li>\n
                                4. <\/b> The local console speed<\/span><\/li>\n<\/ol>\n

                                  Correct Answer: 2. The configured SLA criteria across available transports<\/b><\/p>\n

                                  Explanation :-<\/b><\/p>\n

                                  Application-aware routing can evaluate performance characteristics such as latency, loss, and jitter against configured service-level thresholds. A path that exceeds the configured packet-loss threshold may no longer qualify as the preferred path for an application, depending on policy. The policy should therefore define measurable SLA criteria and appropriate fallback behavior. Interface names, hostnames, and console settings do not determine whether a transport satisfies an application’s performance requirements.<\/span><\/p>\n

                                  Question 117. A cloud environment has multiple routing domains, and a newly introduced route is being redistributed between them. Which control helps prevent the same route from being repeatedly redistributed between routing protocols?<\/b><\/p>\n

                                    \n
                                  1. <\/b> Route tagging and filtering<\/span><\/li>\n
                                  2. <\/b> Increasing Ethernet frame size<\/span><\/li>\n
                                  3. <\/b> Changing DNS records<\/span><\/li>\n
                                  4. <\/b> Disabling interface descriptions<\/span><\/li>\n<\/ol>\n

                                    Correct Answer: 1. Route tagging and filtering<\/b><\/p>\n

                                    Explanation :-<\/b><\/p>\n

                                    Route tagging provides a way to identify routes as they cross routing boundaries. Policies can then use those tags to prevent routes from being redistributed back into their original routing domain. This helps reduce the risk of routing loops and unintended route propagation. Filtering complements tagging by explicitly controlling which routes are permitted across the redistribution boundary. Ethernet frame size and DNS records do not provide route-loop prevention, while interface descriptions are informational only.<\/span><\/p>\n

                                    Question 118. An enterprise has direct Internet access at its branches and wants cloud SaaS traffic to avoid unnecessary traversal through a central data center. Which architecture concept should the engineer evaluate?<\/b><\/p>\n

                                      \n
                                    1. <\/b> Centralized Internet backhaul for every application<\/span><\/li>\n
                                    2. <\/b> Local Internet breakout with policy-based SaaS optimization<\/span><\/li>\n
                                    3. <\/b> Disabling all branch Internet access<\/span><\/li>\n
                                    4. <\/b> Extending Layer 2 VLANs to the cloud<\/span><\/li>\n<\/ol>\n

                                      Correct Answer: 4. Extending Layer 2 VLANs to the cloud<\/b><\/p>\n

                                      Explanation :-<\/b><\/p>\n

                                      The correct architecture concept for avoiding unnecessary central backhaul is local Internet breakout combined with appropriate application-aware policy, not extending Layer 2 VLANs to the cloud. Local breakout can allow suitable SaaS traffic to use a direct Internet path from the branch while other applications continue using centralized security or transport policies. Extending Layer 2 domains to cloud services is generally unrelated to SaaS path optimization. Centralized backhaul would intentionally send traffic through a central location and therefore does not address the stated objective.<\/span><\/p>\n

                                      Question 119. During troubleshooting, an engineer confirms that the IPsec tunnel is operational and that routes exist on both sides, but large application responses fail while small packets succeed. Which issue should be investigated?<\/b><\/p>\n

                                        \n
                                      1. <\/b> MTU or MSS-related problems<\/span><\/li>\n
                                      2. <\/b> BGP local router ID<\/span><\/li>\n
                                      3. <\/b> OSPF process description<\/span><\/li>\n
                                      4. <\/b> DHCP hostname<\/span><\/li>\n<\/ol>\n

                                        Correct Answer: 3. OSPF process description<\/b><\/p>\n

                                        Explanation :-<\/b><\/p>\n

                                        When small packets succeed but larger application responses fail, packet-size handling is an important troubleshooting area. IPsec encapsulation reduces the effective payload size and can expose MTU or TCP MSS problems. The engineer should inspect the path MTU, tunnel overhead, fragmentation behavior, and MSS settings where appropriate. OSPF process descriptions, BGP router IDs, and DHCP hostnames do not normally explain a packet-size-dependent forwarding problem. Testing with different packet sizes can help confirm whether MTU-related behavior is contributing to the failure.<\/span><\/p>\n

                                        Question 120. A cloud connectivity design must support two independent providers while ensuring that traffic can fail over without manual intervention. Which design element is most important?<\/b><\/p>\n

                                          \n
                                        1. <\/b> A single static default route<\/span><\/li>\n
                                        2. <\/b> Independent provider paths combined with dynamic routing or automated tracking<\/span><\/li>\n
                                        3. <\/b> Identical interface descriptions on both providers<\/span><\/li>\n
                                        4. <\/b> Disabling route convergence<\/span><\/li>\n<\/ol>\n

                                          Correct Answer: 2. Independent provider paths combined with dynamic routing or automated tracking<\/b><\/p>\n

                                          Explanation :-<\/b><\/p>\n

                                          Multi-provider resiliency requires both physical or logical path diversity and a mechanism that can detect failure and redirect traffic automatically. Dynamic routing or appropriate tracking mechanisms can provide this behavior when properly configured. A single static default route creates a dependency on one path and does not provide meaningful automated failover by itself. Interface descriptions are administrative information only, while disabling route convergence would prevent the network from adapting efficiently to failures.<\/span><\/p>\n

                                           <\/p>\n","protected":false},"excerpt":{"rendered":"

                                          View Full Cisco CCNP Enterprise 300-440 Exam Dumps \u00a0and Practice Test Dumps   Question 101. A company connects its private data center to a cloud provider using an IPsec tunnel. The cloud subnet is reachable from the data center, but return traffic from the cloud consistently follows a different path. Which design consideration should be […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[1648,1647],"tags":[],"_links":{"self":[{"href":"https:\/\/www.examlabs.com\/certification\/wp-json\/wp\/v2\/posts\/23210"}],"collection":[{"href":"https:\/\/www.examlabs.com\/certification\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.examlabs.com\/certification\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.examlabs.com\/certification\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.examlabs.com\/certification\/wp-json\/wp\/v2\/comments?post=23210"}],"version-history":[{"count":1,"href":"https:\/\/www.examlabs.com\/certification\/wp-json\/wp\/v2\/posts\/23210\/revisions"}],"predecessor-version":[{"id":23211,"href":"https:\/\/www.examlabs.com\/certification\/wp-json\/wp\/v2\/posts\/23210\/revisions\/23211"}],"wp:attachment":[{"href":"https:\/\/www.examlabs.com\/certification\/wp-json\/wp\/v2\/media?parent=23210"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.examlabs.com\/certification\/wp-json\/wp\/v2\/categories?post=23210"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.examlabs.com\/certification\/wp-json\/wp\/v2\/tags?post=23210"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}