Pass CompTIA SY0-701 Exam in First Attempt Easily
Real CompTIA SY0-701 Exam Questions, Accurate & Verified Answers As Experienced in the Actual Test!

Verified by experts
3 products

You save $69.98

SY0-701 Premium Bundle

  • Premium File 1044 Questions & Answers
  • Last Update: Nov 18, 2026
  • Training Course 167 Lectures
  • Study Guide 1003 Pages
$79.99 $149.97

Purchase Individually

  • Premium File

    1044 Questions & Answers
    Last Update: Nov 18, 2026

    $76.99
    $69.99
  • Training Course

    167 Lectures

    $43.99
    $39.99
  • Study Guide

    1003 Pages

    $43.99
    $39.99

CompTIA Security+ SY0-701 Practice Test 17

Question 160

A municipal emergency service requires response times under ten milliseconds. Security architects propose a new inline prevention appliance that adds an untested fifteen milliseconds during peak loads. What should be decided before deployment?

  1. Accept the new appliance based on a passing malware-blocking demonstration and postpone peak-load response-time measurements until after inline enforcement is enabled in production.
  2. Reduce the emergency service’s performance target in the security change ticket to accommodate the additional inspection delay, without obtaining the service owner’s acceptance or verifying patient-impact requirements.
  3. Enable bypass mode on the inspection appliance during all peak periods without measuring whether malicious traffic would then reach the service.
  4. Test and redesign placement or select another control that meets detection goals without violating the response-time requirement.

Explanation

Correct Answer

D:

A representative latency test can reveal whether inspection can be optimized, moved out of line, or replaced with complementary controls. The municipality should maintain its ten-millisecond service objective while assessing actual threat coverage. The final design must be verified at peak traffic, not just during idle benchmarks.

Incorrect Answers

A:

A prevention demonstration establishes that selected attacks can be blocked, not that critical emergency transactions meet the documented ten-millisecond response requirement. The device already showed an untested fifteen-millisecond peak-load delay, which is a serious deployment risk. The team must first test realistic traffic or change placement and design, with documented application-owner acceptance of performance.

B:

A security engineer cannot safely redefine a clinical or emergency-service latency objective merely to accommodate one product. The ten-millisecond constraint comes from the application’s operational requirements and needs accountable owner review. A better decision is testing alternatives such as out-of-path detection, faster inspection, or other placement that provides protection without violating the known response-time limit.

C:

Bypassing inspection might reduce delay but also removes the proposed prevention exactly when emergency systems are busy. The decision must be supported by measured latency budgets, failure modes and alternate controls, not an untested always-bypass exception. A security design should meet the response-time target while retaining necessary protection and documenting any approved risk trade-off.

Question 161

A university needs evidence about east-west traffic but cannot allow a monitoring failure to block core research experiments. What is the principal distinction between a passive network tap and an inline IPS?

  1. Feed mirrored traffic from a passive network tap into a SIEM rule configured for automatic quarantine, and count that tap itself as an inline blocking control.
  2. A passive tap observes copied traffic; an inline IPS can actively drop traffic but introduces enforcement and availability dependencies.
  3. Assume a passive tap can identify the original user behind each encrypted flow without correlating access logs or endpoint identity sources.
  4. Put the IPS inline but enable a hardware bypass path on device failure, then assume this makes the appliance incapable of blocking legitimate research flows or introducing latency.

Explanation

Correct Answer

B:

Passive capture supplies visibility without directly deciding packet forwarding, which suits the university's continuity constraint. An inline IPS can enforce rules but may introduce latency, false positives or failure effects. The choice should account for whether monitoring or blocking is the stated goal and where the equipment sits.

Incorrect Answers

A:

A downstream SIEM or separate response system might trigger quarantine based on tapped packets, but the tap is still copying traffic rather than interrupting packets in the observed path. Calling that arrangement an inline IPS confuses the sensor location with a separate enforcement action. The availability impact depends on where and how the response is enforced, not on the passive tap alone.

C:

A passive tap may observe IP endpoints and flow patterns but ordinarily cannot establish which human or authenticated workload initiated an encrypted session by itself. Accurate attribution needs supporting identity and application telemetry; copied packets do not guarantee user-level evidence.

D:

A fail-open bypass can address some outage scenarios when an inspection appliance loses power, but the inline IPS can still drop packets while operating and add processing delay or false positives. This does not eliminate availability dependencies. The passive tap remains the appropriate monitoring-only choice when the institution cannot tolerate accidental enforcement, while the IPS requires explicit fail-mode and latency testing.

Question 162

A clinic allows offsite technicians to maintain backup appliances. The technician VPN currently provides direct access to every internal subnet. Which architecture better establishes a privileged administration boundary?

  1. Give technicians a shared domain-admin password and allow direct subnet access.
  2. Publish each backup management page to the public internet for easier diagnostics.
  3. Require access through a hardened jump host with individually authenticated sessions, permitted destinations and recorded administrative actions.
  4. Keep the broad technician VPN but add multifactor authentication, without narrowing the reachable maintenance interfaces or recording commands.

Explanation

Correct Answer

C:

A jump host mediates privileged entry and can centralize authentication, session logging and destination restrictions. It limits vendor movement while preserving approved maintenance. The clinic should harden the host, use multifactor authentication and verify the technician cannot bypass it to reach unrelated clinical systems. The jump host should bind each privileged session to a named operator and record access to the specific management target for later investigation.

Incorrect Answers

A:

A shared password weakens accountability and direct access broadens the route an attacker could abuse. Technicians usually need defined appliances, not the entire clinic network. A centralized credential alone does not establish an appropriately narrow administrative path.

B:

Publicly reachable management interfaces increase exposure to scanning, credential attacks and software flaws. The clinic can support remote maintenance through an authenticated broker instead of unmediated internet access. Convenience should not outweigh sensitive backup data and recovery dependencies.

D:

Multifactor authentication can strengthen the entry point but does not prevent an authenticated or compromised technician account from moving through every internal subnet. The architecture needs destination-scoped privileged access and attributable sessions. A hardened jump host provides a controlled chokepoint instead of relying on VPN login assurance alone.

Question 163

A finance team routes analysts' web requests directly to the internet. Security wants centrally consistent URL controls, inspection and attribution while preserving approved analytics sites. Which design best fits?

  1. Route outbound browser access through a managed proxy with user identity, policy enforcement and exception logging.
  2. Deploy different local URL-filter lists on every finance workstation, allowing each analyst to maintain their own exceptions.
  3. Route business application traffic through the corporate VPN while leaving browser internet traffic on each workstation’s unrestricted local connection.
  4. Use a central web proxy but give every analyst one shared authentication identity so its logs cannot distinguish individual users.

Explanation

Correct Answer

A:

A managed proxy can enforce permitted categories and destinations while logging which authenticated user or workload made a request. Exceptions can preserve legitimate research without granting unconstrained egress. The finance team should test HTTPS handling and privacy requirements rather than assume a proxy provides complete endpoint protection.

Incorrect Answers

B:

Host-level filters can protect individual endpoints, but independently managed lists tend to drift and may not provide consistent enforcement or centralized attribution. The finance team specifically wants uniform URL policy across analysts. A governed proxy or equivalent centralized secure-web service can apply rules consistently and log accountable access.

C:

Split routing can preserve some connectivity, but unrestricted direct browser egress bypasses the proposed centralized URL controls and inspection. The organization needs the relevant web requests to traverse an approved policy enforcement point. A tunnel configuration that excludes the target traffic cannot deliver the requested visibility.

D:

Central proxying supports filtering and inspection, but a shared identity weakens user-level attribution. The scenario explicitly requires accountability as well as consistent URL controls. A suitable design links sessions to verified users or devices, protects proxy administration and retains relevant request records without broad shared credentials.

Question 164

An office captures encrypted traffic between branches. Its NIDS sees source, destination and flow timing but cannot inspect payload contents, and a manager claims it will still detect every application exploit. What conclusion is correct?

  1. Use a flow collector to reconstruct the encrypted application request body from its source address, destination address, packet lengths and timing alone.
  2. Treat TLS client fingerprints as equivalent to decrypting application requests, and alert on the exact exploit string using only those fingerprints.
  3. Dismiss application-layer attacks whenever the NIDS reports no payload-based signature, because encrypted sessions would otherwise trigger those signatures.
  4. Encrypted flows provide metadata visibility, but some content-based detections require decryption, endpoint telemetry or other trusted observation points.

Explanation

Correct Answer

D:

Flow data can reveal unusual destinations, volumes and patterns, while signature rules requiring plaintext may not fire. Placing telemetry at an approved termination point or combining host signals can close some visibility gaps. The team should document remaining blind spots rather than claim universal exploit detection.

Incorrect Answers

A:

Flow metadata can support anomaly analysis and reveal communication patterns, but it does not generally reconstruct plaintext application fields from encrypted ciphertext. Identifying a TLS flow does not reveal the SQL command or exploit payload inside it. Content-aware detections require a suitably authorized observation point or endpoint telemetry.

B:

TLS fingerprints characterize aspects of a connection or client implementation. They may help identify suspicious tools but are not the application payload and cannot reliably reveal an exploit string protected by encryption. The NIDS should distinguish metadata indicators from actual content inspection and supplement it when necessary.

C:

A sensor that cannot inspect plaintext cannot rule out attacks hidden inside encrypted flows merely because it saw no content signature. The office can still analyze traffic metadata and certificates, but must use endpoint, proxy or authorized decryption evidence for the unavailable layer. Absence of alerts is not proof of safety.

Question 165

A portal uses a load balancer that terminates TLS before forwarding requests to web nodes. A network IDS is installed only on the encrypted internet-facing link, and application-layer attack detection is incomplete. Which placement change is most relevant?

  1. Keep the IDS upstream on the encrypted link and add more generic TLS handshake signatures without obtaining visibility into application requests.
  2. Mirror internet-facing encrypted packets to a second passive IDS outside the load-balancer boundary and rely on the second sensor’s increased capacity.
  3. Add appropriate inspection visibility at or after the trusted TLS termination boundary while securing the downstream segment.
  4. Disable TLS termination at the balancer and pass encrypted sessions directly to web nodes without arranging any application-layer inspection there.

Explanation

Correct Answer

C:

At the termination point, traffic can be inspected in plaintext under approved controls, enabling application-layer analysis that the edge IDS lacks. Downstream traffic and credentials still need protection, and inspection capacity must meet load-balancer throughput. Architecture tests should confirm no unmonitored bypass to the application nodes.

Incorrect Answers

A:

TLS handshake telemetry can flag protocol anomalies, but the application-layer attacks in the scenario are carried inside encrypted sessions. Merely adding signatures at the same opaque observation point cannot reliably inspect the HTTP requests. Inspection at the trusted termination point or downstream is needed with properly protected mirrored or inline traffic.

B:

Greater collection capacity does not make ciphertext readable, so an additional upstream sensor can reproduce the same blind spot. The useful visibility change must occur where cleartext is lawfully available or where compatible inspection is enabled. The downstream link should also be protected because termination can expose sensitive request contents.

D:

Moving the termination point may change who can see application requests, but it does not itself create IDS visibility. The same encrypted-traffic limitation can simply move to the backend connection. The portal needs a planned inspection point matched to the actual cleartext boundary, rather than shifting TLS configuration without an inspection design.

Question 166

An industrial logistics yard has fenced transformers and an unattended control building. Security wants alarms for vehicle and pedestrian entry without letting storms generate constant false positives. Which approach is most appropriate?

  1. Put a consumer webcam indoors and assume it detects every perimeter breach.
  2. Use site-tested perimeter sensors, protected alert paths and maintenance rules suited to the outdoor environment.
  3. Disconnect safety-related alarms whenever weather is bad without notifying operators.
  4. Publish access codes to contractors to reduce legitimate false alarms.

Explanation

Correct Answer

B:

Outdoor intrusion detection should reflect vehicle paths, fence zones, weather and operational safety. Validated sensors and protected alarm routing can distinguish genuine entry from predictable environmental disturbances. The logistics operator should measure false positives and ensure maintenance failures do not silently disable critical alerts. Field tests should verify that sensor outages and network interruptions generate distinguishable alarms, especially when the fenced yard is unattended overnight.

Incorrect Answers

A:

An indoor webcam may have poor exterior coverage, weather resistance and alarm integration. It cannot be assumed to monitor fenced approaches reliably. The yard needs controls matched to range, conditions and the protected physical boundary.

C:

Turning off alarms during storms would create predictable unmonitored periods when intrusion or equipment damage could still occur. A safe design uses tuning and fault supervision instead. Operators need visibility when protection is degraded.

D:

Publishing codes undermines access control and can make intentional entry look authorized. Contractor convenience should use accountable temporary credentials and scheduled access. Reducing false positives by removing authentication would sacrifice the security objective.

Question 167

A campus connects contractor laptops to visitor-facing switch ports. It needs these devices isolated from employee systems even when a user knows a nearby office's Wi-Fi password. What does 802.1X with appropriate RADIUS policy provide?

  1. Port-level authentication and assignment to a restricted guest network based on verified identity or device policy.
  2. Enable 802.1X authentication but place any successfully authenticated switch-port device into the default employee VLAN regardless of contractor identity.
  3. Assign VLAN membership from the physical switch-port label without checking the attached device’s credentials or policy role.
  4. Authenticate contractor laptops with RADIUS and then permit them to move freely between the guest and employee networks for troubleshooting.

Explanation

Correct Answer

A:

An 802.1X authenticator can restrict network admission until credentials or device conditions are evaluated through an authentication server. Policies can then assign a permitted network segment. The campus should test guest VLAN assignment, failures and fallback behavior to ensure employee resources remain isolated. The access rule should be evaluated on the switch port before an unrecognized device is given any path to the employee segment.

Incorrect Answers

B:

802.1X can authenticate the access request, but successful authentication alone does not imply the correct network role. The campus needs RADIUS policy mapping contractor credentials or device posture to a guest segment. Putting all authorized identities in the employee VLAN fails the isolation requirement.

C:

Static ports can be assigned restricted VLANs, but the scenario asks what 802.1X with appropriate RADIUS authorization adds beyond physical placement. If a contractor moves to a different port, unauthenticated role assumptions can fail. Identity-based admission and dynamic restricted assignment are better aligned to this scenario.

D:

RADIUS-backed authentication establishes an identity or device assurance level; it does not require unrestricted lateral access. The organization wants contractor systems separated from employee resources. Proper network admission combines authentication with role-based restrictions, maintaining isolation regardless of the switch port used and enforcing the contractor restrictions at each authenticated admission.

Question 168

A warehouse updates employee Wi-Fi authentication and must choose between password-based EAP and certificate-based EAP-TLS. Several devices are managed and already have individual client certificates. Which assessment best supports selection?

  1. Choose password-based EAP with one shared warehouse employee password so replacements can be configured without per-device certificates.
  2. Deploy EAP-TLS using the existing client certificates but disable RADIUS server certificate validation to avoid onboarding delays.
  3. Install client certificates without a revocation process because EAP-TLS no longer depends on any employee or device account lifecycle.
  4. EAP-TLS can authenticate managed clients with certificates when the certificate lifecycle and RADIUS trust are correctly configured.

Explanation

Correct Answer

D:

Managed devices with individual certificates are good candidates for EAP-TLS if the environment can provision and validate them reliably. Server certificate trust, client identity mapping and revocation are essential. The warehouse should test onboarding, replacement and failed certificate cases before broad deployment. Certificate issuance, revocation and supplicant configuration have to be governed together or a theoretically stronger EAP method may fail during deployment.

Incorrect Answers

A:

A common password is convenient but undermines attribution and revocation for individual devices or staff. The scenario already provides managed endpoints with unique client certificates suitable for certificate-based authentication. An enterprise Wi-Fi design should prefer individual identities and avoid turning every employee into a custodian of one shared network secret.

B:

Client certificate authentication is only one side of establishing a trustworthy EAP exchange. If clients accept an unauthenticated authentication server, they may be tricked into interacting with a rogue access service. EAP-TLS should use valid server trust and client certificate lifecycle controls instead of bypassing server identity checks.

C:

Certificates can be compromised, devices can be lost and staff can leave. A controlled enrollment, expiration and revocation process remains necessary so previously trusted certificates do not grant ongoing access without authorization. Managed devices already possessing client certificates are useful only when the issuing and RADIUS trust relationships are maintained.

Question 169

A customer portal experiences SQL injection probes carried in otherwise valid HTTPS requests. The network team proposes a Layer 4 firewall that blocks nonstandard ports only. What additional control best addresses the request content?

  1. Use a web application firewall with appropriate application rules while fixing unsafe query handling in the application.
  2. Rely on a network intrusion sensor that only observes TLS-encrypted flow metadata and cannot inspect or decode the application request parameters.
  3. Block all HTTPS traffic to the ordering portal instead of examining which request paths and application inputs are vulnerable.
  4. Increase the firewall's log-retention period as the sole prevention step.

Explanation

Correct Answer

A:

A WAF can inspect supported HTTP request patterns that a port-based filter does not understand, helping block known injection attempts. It is a compensating layer, not a replacement for parameterized queries and secure application code. The portal should verify signatures, false positives and application fixes together.

Incorrect Answers

B:

A passive sensor placed outside the TLS termination point may still identify suspicious destinations and rates, but it will not inspect the SQL-bearing HTTPS parameters in this scenario. Layer 7 inspection must have appropriate visibility, and the application should use parameterized queries. Treating encrypted flow metadata as complete request-content protection would miss the injection path in otherwise valid HTTPS traffic.

C:

A blanket HTTPS shutdown might stop malicious requests, but it would also disable legitimate customer activity and is not a proportionate application-layer correction. The portal can retain authorized service while filtering suspicious requests at an appropriate boundary and repairing unsafe query construction. The security decision needs content-aware controls and evidence-based exceptions, not indiscriminate denial of its main transport protocol.

D:

Longer logs may support investigation but do not prevent the malicious query from being accepted and executed. The requested outcome is request filtering and removal of the underlying flaw. Detective retention should complement corrective development and WAF enforcement.

Question 170

A municipal web service handles high-volume emergency registrations. A next-generation firewall performs deep inspection but its benchmarked throughput drops below the site's peak traffic. What design choice is most defensible?

  1. Remove all security controls because high demand makes inspection impossible.
  2. Select inspection placement and capacity that meet measured peak load, prioritizing necessary protections and preserving service availability.
  3. Size the inspection appliance from its maximum published throughput rating without measuring the application’s real peak TLS and inspection workload.
  4. Send all applicant credentials to a shared network tap outside the service boundary.

Explanation

Correct Answer

B:

Deep packet inspection consumes resources and can become a bottleneck. Capacity planning should use representative encrypted traffic, concurrency and failure modes, with controls at suitable trust boundaries. A validated design can support both the protection objective and the application's recovery target. Peak-load inspection tests should include the effects of TLS decryption and rule complexity rather than quoting the appliance's uninspected forwarding rate.

Incorrect Answers

A:

Abandoning security would expose emergency registrations and does not fix the need for a reliable protected service. Controls can be scaled, distributed or scoped. The city should balance traffic and safety through measured architecture decisions rather than all-or-nothing removal.

C:

Marketing line-rate figures can differ from actual throughput with deep inspection, encrypted traffic and enabled security features. The emergency service has a measured peak requirement, so capacity needs to be validated under the operating rules and traffic patterns that will exist in production.

D:

Credential replication to an uncontrolled tap would create confidentiality and governance risk. Passive monitoring can be designed with restricted access and minimized sensitive data, but it is not a response to a throughput shortfall. Security telemetry should remain inside approved boundaries.

CompTIA Security+ (SY0-701) Practice Tests

Purchase Individually

  • Premium File

    1044 Questions & Answers
    Last Update: Nov 18, 2026

    $76.99
    $69.99
  • Training Course

    167 Lectures

    $43.99
    $39.99
  • Study Guide

    1003 Pages

    $43.99
    $39.99

SPECIAL OFFER: GET 10% OFF
This is ONE TIME OFFER

You save
10%

Enter Your Email Address to Receive Your 10% Off Discount Code

SPECIAL OFFER: GET 10% OFF

You save
10%

Use Discount Code:

A confirmation link was sent to your e-mail.

Please check your mailbox for a message from support@examlabs.com and follow the directions.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your email address below to get started with our interactive software demo of your free trial.

  • Realistic exam simulation and exam editor with preview functions
  • Whole exam in a single file with several different question types
  • Customizable exam-taking mode & detailed score reports