Pass Fortinet NSE4_FGT_AD-7.6 Exam in First Attempt Easily
Real Fortinet NSE4_FGT_AD-7.6 Exam Questions, Accurate & Verified Answers As Experienced in the Actual Test!

Verified by experts

NSE4_FGT_AD-7.6 Premium File

  • 94 Questions & Answers
  • Last Update: Nov 17, 2026
$69.99 $76.99

Fortinet NSE 4 - FortiOS 7.6 Administrator NSE4_FGT_AD-7.6 Practice Test 27

Question 260

A branch FortiGate operator reports the following issue: A firewall inspection plan assumes all IPS signatures will function identically on opaque HTTPS traffic with certificate inspection only. Reviewers require proof that an authorized encrypted attack test is inspected and its IPS verdict is logged without client TLS failure.. What should the engineer implement?

  1. Use an approved SSL inspection depth that exposes supported payloads to IPS where inspection of encrypted content is required.
  2. Change the applicable IPS signature action to block under a reviewed sensor policy.
  3. Keep the narrowly scoped allow policy for the service and attach an IPS sensor that blocks the exploit pattern.
  4. Apply an appropriate antivirus profile and compatible inspection to the matching accept policy, then retest with an authorized harmless sample.

Explanation

Correct Answer

A:

IPS cannot inspect application payload bytes that remain encrypted and unavailable to its inspection engine. The required result is: an authorized encrypted attack test is inspected and its IPS verdict is logged without client TLS failure.

Incorrect Answers

B:

IPS monitor actions produce alerts without necessarily terminating matching exploit traffic. It does not demonstrate that an authorized encrypted attack test is inspected and its IPS verdict is logged without client TLS failure.

C:

A forwarding deny rejects packets before content inspection; IPS examines permitted session payloads for attacks. It does not demonstrate that an authorized encrypted attack test is inspected and its IPS verdict is logged without client TLS failure.

D:

Antivirus scanning requires content visibility and a security profile assigned to the traffic's policy. This action addresses another condition: an employee downloads an EICAR-style safe test string over an inspected protocol, but the FortiGate security logs show no antivirus action. It does not demonstrate the required result: an authorized encrypted attack test is inspected and its IPS verdict is logged without client TLS failure.

Question 261

A production change proposes: Enable the reviewed policy and confirm that its schedule, addresses, service and interface criteria all match. The condition it must correct is: A scheduled policy change unexpectedly stops traffic because the new rule is disabled in configuration. What mechanism connects the proposed action to the requirement?

  1. A deny below a matching allow has no effect on traffic already permitted by the earlier rule.
  2. A FortiGate forwarding policy must match the observed ingress and selected egress interfaces as well as addresses and service.
  3. Policy schedules control when a traffic rule is eligible to match independently of ordinary source and service criteria.
  4. Policy entries that are administratively disabled cannot accept traffic regardless of object correctness.

Explanation

Correct Answer

D:

Policy entries that are administratively disabled cannot accept traffic regardless of object correctness.

Incorrect Answers

A:

The proposed step would keep the narrow deny above any broader matching allow and test policy ordering against the targeted flow; it does not establish that the observed session reports the enabled policy ID after a test connection.

B:

The proposed step would correct the policy interface pair to match the route's incoming and outgoing interfaces; it does not establish that the observed session reports the enabled policy ID after a test connection.

C:

The proposed step would assign the approved recurring or one-time schedule to the vendor's narrowly scoped firewall policy; it does not establish that the observed session reports the enabled policy ID after a test connection.

Question 262

During FortiGate troubleshooting, an engineer observes this condition: A branch firewall reports RADIUS server timeout, but helpdesk staff are resetting user passwords without evidence of credential rejection. The acceptance requirement is that an authentication trace shows a reachable RADIUS responder returning a definitive accept or reject.. Which action is most appropriate?

  1. Correct RADIUS destination port and secret settings on the FortiGate to the approved server values.
  2. Update the FortiGate RADIUS client secret and confirm server address and authentication reachability.
  3. Configure the approved remote LDAP server settings and group mapping before referencing the group in an authentication policy.
  4. Test network reachability and protocol exchange with the RADIUS server before modifying individual accounts.

Explanation

Correct Answer

D:

A server timeout indicates a transport or responder issue, whereas an explicit reject is a credential or policy decision. The required result is: an authentication trace shows a reachable RADIUS responder returning a definitive accept or reject.

Incorrect Answers

A:

Authentication traffic must reach the active RADIUS listener using the configured shared secret and transport port. It does not demonstrate that an authentication trace shows a reachable RADIUS responder returning a definitive accept or reject.

B:

RADIUS authentication requires matching shared secrets and reachable client/server transport settings. It does not demonstrate that an authentication trace shows a reachable RADIUS responder returning a definitive accept or reject.

C:

Directory-backed firewall authorization requires a functioning LDAP bind and valid group mapping. It does not demonstrate that an authentication trace shows a reachable RADIUS responder returning a definitive accept or reject.

Question 263

An audit questions the design rationale for this FortiGate control: Check routing for the remote prefix and run a scoped debug flow to identify the forwarding decision. The change targets: A VPN tunnel is reported up yet applications to a remote subnet fail; the administrator needs to separate route lookup from security-policy rejection. Which explanation correctly describes why it works?

  1. A physical/link-layer failure prevents packets from arriving at higher-layer policy evaluation.
  2. Stateful forwarding expects return traffic to match an established session path unless asymmetric routing is handled explicitly.
  3. An established IKE tunnel does not prove data traffic has a valid route and accepted firewall policy.
  4. First-match firewall policy ordering can make a later allow unreachable for traffic already matched by a deny.

Explanation

Correct Answer

C:

An established IKE tunnel does not prove data traffic has a valid route and accepted firewall policy.

Incorrect Answers

A:

The proposed step would verify interface link status, transceiver negotiation and cabling before adjusting application control profiles; it does not establish that the trace shows the correct tunnel egress and matching allow policy for the remote subnet.

B:

The proposed step would compare forward and reverse routes and session states, then correct asymmetric routing or the affected policy design; it does not establish that the trace shows the correct tunnel egress and matching allow policy for the remote subnet.

D:

The proposed step would examine matching policy order and diagnose debug flow, then move the intended narrower allow ahead of the broader deny if justified; it does not establish that the trace shows the correct tunnel egress and matching allow policy for the remote subnet.

Question 264

A production FortiGate ticket states: An application is steered correctly for existing sessions but a changed SLA is expected to instantly move every established TCP connection to a new link. To close the ticket, the team must show that new test connections select the improved path and session continuity follows the documented strategy.. What change directly meets the requirement?

  1. Separate appropriate SD-WAN zones for private and public link groups and reference them in distinct firewall policies.
  2. Update the forwarding firewall policy to reference the appropriate SD-WAN zone rather than a single member.
  3. Validate session-aware SD-WAN behavior and test how new sessions are selected after the SLA change.
  4. Select reachable appropriate probe targets and a supported health-check method representative of actual service reachability.

Explanation

Correct Answer

C:

Existing stateful sessions may retain their mapped path while new sessions follow updated steering decisions. The required result is: new test connections select the improved path and session continuity follows the documented strategy.

Incorrect Answers

A:

Policies reference SD-WAN zones, so separate zones enable differing security treatment by link class. It does not demonstrate that new test connections select the improved path and session continuity follows the documented strategy.

B:

SD-WAN members are grouped by zones for policy matching; policies normally reference the zone interface. It does not demonstrate that new test connections select the improved path and session continuity follows the documented strategy.

D:

SLA results are only as accurate as the configured probe target and protocol; blocked probes can falsely mark useful links ineligible. It does not demonstrate that new test connections select the improved path and session continuity follows the documented strategy.

Question 265

A network security change review documents: After redeploying a FortiGate VM, internal traffic bypasses the security appliance because the cloud route table still points directly to the default gateway. The expected validation is that cloud path tracing shows the regulated flow traversing the firewall and producing its security log entry.. Which remediation should be selected?

  1. Check the VM's applicable entitlement and FortiGuard update status, then restore licensed threat-intelligence access.
  2. Evaluate and deploy FortiGate Cloud-Native Firewall for the supported VPC traffic inspection use case.
  3. Update the supported cloud route tables or traffic-steering constructs to send the intended flow through the FortiGate inspection path.
  4. Map cloud route tables, attached interfaces, firewall policy scopes and the protected subnets as part of the exception review.

Explanation

Correct Answer

C:

FortiGate VM cannot inspect traffic that the cloud networking fabric routes around it. The required result is: cloud path tracing shows the regulated flow traversing the firewall and producing its security log entry.

Incorrect Answers

A:

Virtual firewall management and licensed signature services have distinct operational dependencies. It does not demonstrate that cloud path tracing shows the regulated flow traversing the firewall and producing its security log entry.

B:

FortiGate CNF integrates managed cloud firewall inspection with supported cloud network routing patterns. It does not demonstrate that cloud path tracing shows the regulated flow traversing the firewall and producing its security log entry.

D:

Cloud inventory by itself does not establish which flows pass through the FortiGate dataplane. It does not demonstrate that cloud path tracing shows the regulated flow traversing the firewall and producing its security log entry.

Question 266

The team managing a FortiOS 7.6 environment must address: An outbound HTTP application is allowed but no web filter or antivirus events appear even during controlled test content downloads. The fix must demonstrate that test traffic matches the identified policy and produces the applicable profile inspection log.. Select the best approach.

  1. Verify the configured NGFW mode and apply application control profiles using the semantics of profile-based mode.
  2. Attach the required security profiles to the matching accept policy and enable appropriate logging.
  3. Place the intended more-specific identity and address policy above the general allow and verify matching criteria.
  4. Assign the approved recurring or one-time schedule to the vendor's narrowly scoped firewall policy.

Explanation

Correct Answer

B:

Accepting L3/L4 traffic without a relevant security profile does not enable the expected content inspection. The required result is: test traffic matches the identified policy and produces the applicable profile inspection log.

Incorrect Answers

A:

Profile-based NGFW policies attach security profiles, while policy-based NGFW has different application and central NAT behavior. It does not demonstrate that test traffic matches the identified policy and produces the applicable profile inspection log.

C:

First-match ordering means a broad earlier rule can shadow narrower identity-aware rules. It does not demonstrate that test traffic matches the identified policy and produces the applicable profile inspection log.

D:

Policy schedules control when a traffic rule is eligible to match independently of ordinary source and service criteria. It does not demonstrate that test traffic matches the identified policy and produces the applicable profile inspection log.

Question 267

The team managing a FortiOS 7.6 environment must address: An IT service is classified by a broad application category, but one critical application within the category must remain usable. The fix must demonstrate that the permitted named application works and another application in the blocked category is denied.. Select the best approach.

  1. Attach the approved application-control profile to the actual matching policy with the proper inspection mode.
  2. Apply an application-control profile with the targeted application signature action to the matching firewall policy.
  3. Verify FortiGuard application-control database currency and confirm the relevant signature behavior with a controlled test.
  4. Configure a suitably prioritized specific application signature exception in the application-control profile.

Explanation

Correct Answer

D:

A specific signature override can distinguish an approved application from a generally blocked application category. The required result is: the permitted named application works and another application in the blocked category is denied.

Incorrect Answers

A:

Profiles that are only defined in the security profile menu cannot inspect traffic until a matching policy uses them. It does not demonstrate that the permitted named application works and another application in the blocked category is denied.

B:

Application signatures identify higher-level applications beyond the destination transport port. It does not demonstrate that the permitted named application works and another application in the blocked category is denied.

C:

Signature recognition depends on updated application signatures and observed traffic patterns; unsupported variants should not be assumed covered. It does not demonstrate that the permitted named application works and another application in the blocked category is denied.

Question 268

Two separate production tickets must be resolved before cutover. Ticket A: A site-to-site IPsec connection establishes phase 1 but no data SA forms because its phase 2 proposals use different encryption algorithms. Ticket B: An IKE debug log reports that the received remote ID differs from the configured expected peer ID, although both public IPs respond. Choose exactly TWO controls that jointly satisfy them.

  1. Correct the phase 1 peer identity settings to the approved local/remote identifiers.
  2. Match the permitted phase 2 ESP proposals and PFS settings on both ends.
  3. Configure route priorities and suitable tunnel/link monitoring to prefer the healthy backup IPsec interface.
  4. Configure the matching approved preshared secret or certificate authentication on both peers.

Explanation

Correct Answers

A:

Peer ID validation is separate from IP reachability and cryptographic proposal compatibility. The verification is: iKE debug no longer reports an identity mismatch and the peer authenticates successfully.

B:

Phase 2 child SA negotiation requires compatible traffic selectors and cryptographic parameters after IKE is established. The verification is: the tunnel establishes a usable IPsec child SA and a test application packet traverses it.

Incorrect Answers

C:

Redundant VPN design needs eligible backup routing and health detection; having two tunnels alone does not implement failover. The proposed alternative does not demonstrate that iKE debug no longer reports an identity mismatch and the peer authenticates successfully and that the tunnel establishes a usable IPsec child SA and a test application packet traverses it.

D:

IKE authentication requires agreeing on peer credentials and identity material. The proposed alternative does not demonstrate that iKE debug no longer reports an identity mismatch and the peer authenticates successfully and that the tunnel establishes a usable IPsec child SA and a test application packet traverses it.

Question 269

A network security change review documents: A FortiGate uses central NAT, but a technician added SNAT only to an individual firewall policy and sees unchanged private source IPs. The expected validation is that a traffic capture shows the centrally selected translated source address.. Which remediation should be selected?

  1. Enable policy SNAT with the appropriate outgoing-interface address or approved IP pool under the chosen NAT mode.
  2. Add the appropriate central SNAT policy matching the source and egress interface under central NAT mode.
  3. Evaluate hairpin or loopback VIP policy and SNAT handling for internal-to-internal access by the external address.
  4. Update the VIP's mapped IP and verify the associated firewall policy and server reachability.

Explanation

Correct Answer

B:

Central NAT mode applies source translation through the central SNAT table rather than individual policy NAT toggles. The required result is: a traffic capture shows the centrally selected translated source address.

Incorrect Answers

A:

Source NAT changes internal client source addresses to routable public addresses for outbound sessions. It does not demonstrate that a traffic capture shows the centrally selected translated source address.

C:

Hairpin traffic may require a dedicated matching policy and translation to maintain a symmetric return path. It does not demonstrate that a traffic capture shows the centrally selected translated source address.

D:

VIP destination translations continue using their configured mapped address until the object changes. It does not demonstrate that a traffic capture shows the centrally selected translated source address.

Question 270

The team managing a FortiOS 7.6 environment must address: A company requires every branch to reach every other branch directly without traversing a central hub and the size is fixed at three sites. The fix must demonstrate that each pair of branches communicates directly over its intended secured tunnel.. Select the best approach.

  1. Couple supported dead-peer detection with tunnel health and routing failover behavior for the specified route-based VPN design.
  2. Configure route priorities and suitable tunnel/link monitoring to prefer the healthy backup IPsec interface.
  3. Align the approved IKE version and mutually supported phase 1 proposals on both gateways.
  4. Configure a full-mesh set of supported route-based IPsec tunnels with matching policies and routes.

Explanation

Correct Answer

D:

Full mesh provides direct intersite paths at the cost of additional tunnel relationships. The required result is: each pair of branches communicates directly over its intended secured tunnel.

Incorrect Answers

A:

Detecting an inactive IKE peer and selecting a viable backup forwarding route are related but distinct controls. It does not demonstrate that each pair of branches communicates directly over its intended secured tunnel.

B:

Redundant VPN design needs eligible backup routing and health detection; having two tunnels alone does not implement failover. It does not demonstrate that each pair of branches communicates directly over its intended secured tunnel.

C:

Phase 1 IKE negotiation requires compatible versions and cryptographic proposals before a secure negotiation channel exists. It does not demonstrate that each pair of branches communicates directly over its intended secured tunnel.

Fortinet NSE 4 - FortiOS 7.6 Administrator (NSE4_FGT_AD-7.6) Practice Tests

SPECIAL OFFER: GET 10% OFF
This is ONE TIME OFFER

You save
10%

Enter Your Email Address to Receive Your 10% Off Discount Code

SPECIAL OFFER: GET 10% OFF

You save
10%

Use Discount Code:

A confirmation link was sent to your e-mail.

Please check your mailbox for a message from support@examlabs.com and follow the directions.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your email address below to get started with our interactive software demo of your free trial.

  • Realistic exam simulation and exam editor with preview functions
  • Whole exam in a single file with several different question types
  • Customizable exam-taking mode & detailed score reports