Pass NVIDIA NCP-AII Exam in First Attempt Easily
Real NVIDIA NCP-AII Exam Questions, Accurate & Verified Answers As Experienced in the Actual Test!

Verified by experts

NCP-AII Premium File

  • 170 Questions & Answers
  • Last Update: Nov 6, 2026
$69.99 $76.99

NCP-AI Infrastructure NCP-AII Practice Test 9

Question 80

At an AI infrastructure site, an accelerator reports recurring uncorrectable GPU memory errors during commissioning even though the vendor dashboard shows a normal temperature. If the described issue remains uncorrected, which consequence is the MOST direct operational risk?

  1. Scheduling jobs against an incomplete node can fail or oversubscribe remaining GPUs.
  2. Unauthorized users could gain a lower-level path into a secured training server.
  3. Repeated thermal throttling can slow training and precede service interruptions.
  4. A defective GPU can corrupt computations or abort high-cost training work.

Explanation

Correct Answer

D:

A defective GPU can corrupt computations or abort high-cost training work. This follows from the specific unresolved ecc health at acceptance condition. An appropriate mitigation is: Quarantine the affected GPU and run supported memory diagnostics before certifying the node.

Incorrect Answers

A:

Scheduling jobs against an incomplete node can fail or oversubscribe remaining GPUs. That is a consequence of pcie server seating check, not the most direct risk of the stated ecc health at acceptance defect. The scenario-specific exposure is: A defective GPU can corrupt computations or abort high-cost training work.

B:

Unauthorized users could gain a lower-level path into a secured training server. That is a consequence of bmc credential hardening, not the most direct risk of the stated ecc health at acceptance defect. The scenario-specific exposure is: A defective GPU can corrupt computations or abort high-cost training work.

C:

Repeated thermal throttling can slow training and precede service interruptions. That is a consequence of thermal headroom under load, not the most direct risk of the stated ecc health at acceptance defect. The scenario-specific exposure is: A defective GPU can corrupt computations or abort high-cost training work.

Question 81

At an AI infrastructure site, the rack controller shows a fan alarm while a host-level monitoring dashboard shows no warning because the OS agent was never configured. Which operational response MOST directly resolves the specific blocker described before this equipment or service is accepted?

  1. Follow the approved physical-to-logical bring-up sequence: inventory, power and cooling, BMC, firmware, links, driver visibility, then workload tests.
  2. Compare firmware compatibility and link/error telemetry, then test the supported update or rollback path.
  3. Correlate BMC sensor telemetry with host health monitoring and validate the alert path.
  4. Reconcile firmware/PCIe enumeration with device visibility and isolate the missing hardware path before acceptance.

Explanation

Correct Answer

C:

Correlate BMC sensor telemetry with host health monitoring and validate the alert path. This addresses the reported system management sensor reconciliation blocker, because hardware faults can be detected below the OS by BMC even when application monitoring is incomplete. The acceptance evidence is: A known fan-fault test reaches the operations system with correct severity and source identity.

Incorrect Answers

A:

Follow the approved physical-to-logical bring-up sequence: inventory, power and cooling, BMC, firmware, links, driver visibility, then workload tests. This is an appropriate response to rack acceptance sequencing, but the described incident is system management sensor reconciliation rather than that separate fault. It would not directly establish the required correction: Correlate BMC sensor telemetry with host health monitoring and validate the alert path.

B:

Compare firmware compatibility and link/error telemetry, then test the supported update or rollback path. This is an appropriate response to post-flash device fault detection, but the described incident is system management sensor reconciliation rather than that separate fault. It would not directly establish the required correction: Correlate BMC sensor telemetry with host health monitoring and validate the alert path.

D:

Reconcile firmware/PCIe enumeration with device visibility and isolate the missing hardware path before acceptance. This is an appropriate response to pcie enumeration consistency, but the described incident is system management sensor reconciliation rather than that separate fault. It would not directly establish the required correction: Correlate BMC sensor telemetry with host health monitoring and validate the alert path.

Question 82

At an AI infrastructure site, the rack controller shows a fan alarm while a host-level monitoring dashboard shows no warning because the OS agent was never configured. Which evidence MOST directly shows that the specific blocker in this scenario has been corrected?

  1. Post-service inventory, power checks, and diagnostics confirm the new GPU is properly seated and operational.
  2. A known fan-fault test reaches the operations system with correct severity and source identity.
  3. A container running under its production identity writes and rereads a checkpoint in the designated location.
  4. A test kernel completes on each expected device with correct output and no driver or memory errors.

Explanation

Correct Answer

B:

A known fan-fault test reaches the operations system with correct severity and source identity. This observation tests the stated system management sensor reconciliation correction rather than unrelated node health. The underlying principle is: Hardware faults can be detected below the OS by BMC even when application monitoring is incomplete.

Incorrect Answers

A:

Post-service inventory, power checks, and diagnostics confirm the new GPU is properly seated and operational. That is acceptance evidence for gpu field installation safety; it does not establish that system management sensor reconciliation has been corrected. The relevant observation is: A known fan-fault test reaches the operations system with correct severity and source identity.

C:

A container running under its production identity writes and rereads a checkpoint in the designated location. That is acceptance evidence for storage permissions at initial bring-up; it does not establish that system management sensor reconciliation has been corrected. The relevant observation is: A known fan-fault test reaches the operations system with correct severity and source identity.

D:

A test kernel completes on each expected device with correct output and no driver or memory errors. That is acceptance evidence for representative cuda workload proof; it does not establish that system management sensor reconciliation has been corrected. The relevant observation is: A known fan-fault test reaches the operations system with correct severity and source identity.

Question 83

At an AI infrastructure site, the rack controller shows a fan alarm while a host-level monitoring dashboard shows no warning because the OS agent was never configured. Which technical principle BEST explains the specific failure or solution in this scenario?

  1. A TPM provides protected measurement and key functions, while the presence of hardware alone does not prove policy enforcement.
  2. BMC operates outside the host OS and can manipulate boot media, reset hardware, or change firmware settings.
  3. Hardware faults can be detected below the OS by BMC even when application monitoring is incomplete.
  4. Thermal management limits component frequency or power to protect the hardware.

Explanation

Correct Answer

C:

Hardware faults can be detected below the OS by BMC even when application monitoring is incomplete. This is why the operational remedy in this scenario is: Correlate BMC sensor telemetry with host health monitoring and validate the alert path. A direct demonstration is: A known fan-fault test reaches the operations system with correct severity and source identity.

Incorrect Answers

A:

A TPM provides protected measurement and key functions, while the presence of hardware alone does not prove policy enforcement. That principle fits tpm measured-boot evidence, but does not explain the system management sensor reconciliation failure mechanism. The applicable explanation is: Hardware faults can be detected below the OS by BMC even when application monitoring is incomplete.

B:

BMC operates outside the host OS and can manipulate boot media, reset hardware, or change firmware settings. That principle fits bmc credential hardening, but does not explain the system management sensor reconciliation failure mechanism. The applicable explanation is: Hardware faults can be detected below the OS by BMC even when application monitoring is incomplete.

D:

Thermal management limits component frequency or power to protect the hardware. That principle fits thermal headroom under load, but does not explain the system management sensor reconciliation failure mechanism. The applicable explanation is: Hardware faults can be detected below the OS by BMC even when application monitoring is incomplete.

Question 84

At an AI infrastructure site, the rack controller shows a fan alarm while a host-level monitoring dashboard shows no warning because the OS agent was never configured. If the described issue remains uncorrected, which consequence is the MOST direct operational risk?

  1. Starting production jobs before driver readiness creates avoidable failures.
  2. A real cooling failure may be missed if one monitoring layer is trusted alone.
  3. One feed failure may trip the remaining breaker and drop the rack.
  4. A node may look healthy in inventory while failing its first production kernel.

Explanation

Correct Answer

B:

A real cooling failure may be missed if one monitoring layer is trusted alone. This follows from the specific unresolved system management sensor reconciliation condition. An appropriate mitigation is: Correlate BMC sensor telemetry with host health monitoring and validate the alert path.

Incorrect Answers

A:

Starting production jobs before driver readiness creates avoidable failures. That is a consequence of nvidia smi bring-up baseline, not the most direct risk of the stated system management sensor reconciliation defect. The scenario-specific exposure is: A real cooling failure may be missed if one monitoring layer is trusted alone.

C:

One feed failure may trip the remaining breaker and drop the rack. That is a consequence of redundant power feed sizing, not the most direct risk of the stated system management sensor reconciliation defect. The scenario-specific exposure is: A real cooling failure may be missed if one monitoring layer is trusted alone.

D:

A node may look healthy in inventory while failing its first production kernel. That is a consequence of representative cuda workload proof, not the most direct risk of the stated system management sensor reconciliation defect. The scenario-specific exposure is: A real cooling failure may be missed if one monitoring layer is trusted alone.

Question 85

At an AI infrastructure site, two 400G switches cannot form a link after installation; the patch uses optics whose supported reach and fiber type do not match the cabling. Which operational response MOST directly resolves the specific blocker described before this equipment or service is accepted?

  1. Quarantine the affected GPU and run supported memory diagnostics before certifying the node.
  2. Correct airflow obstructions and validate inlet/outlet temperatures using vendor installation limits.
  3. Compare firmware compatibility and link/error telemetry, then test the supported update or rollback path.
  4. Check vendor-supported transceiver standard, wavelength, media, reach, and port compatibility, then correct the pair.

Explanation

Correct Answer

D:

Check vendor-supported transceiver standard, wavelength, media, reach, and port compatibility, then correct the pair. This addresses the reported optical transceiver matching blocker, because optical link establishment depends on compatible modules, fiber, and optical budget at both ends. The acceptance evidence is: Both ends negotiate the intended link with stable signal margin and zero recurring physical errors.

Incorrect Answers

A:

Quarantine the affected GPU and run supported memory diagnostics before certifying the node. This is an appropriate response to ecc health at acceptance, but the described incident is optical transceiver matching rather than that separate fault. It would not directly establish the required correction: Check vendor-supported transceiver standard, wavelength, media, reach, and port compatibility, then correct the pair.

B:

Correct airflow obstructions and validate inlet/outlet temperatures using vendor installation limits. This is an appropriate response to cold-aisle airflow obstruction, but the described incident is optical transceiver matching rather than that separate fault. It would not directly establish the required correction: Check vendor-supported transceiver standard, wavelength, media, reach, and port compatibility, then correct the pair.

C:

Compare firmware compatibility and link/error telemetry, then test the supported update or rollback path. This is an appropriate response to post-flash device fault detection, but the described incident is optical transceiver matching rather than that separate fault. It would not directly establish the required correction: Check vendor-supported transceiver standard, wavelength, media, reach, and port compatibility, then correct the pair.

Question 86

At an AI infrastructure site, two 400G switches cannot form a link after installation; the patch uses optics whose supported reach and fiber type do not match the cabling. Which evidence MOST directly shows that the specific blocker in this scenario has been corrected?

  1. The acceptance package includes GPU diagnostics, link checks, thermal data, and representative workload results for both servers.
  2. Receive optical power and both directional link indicators return to supported ranges.
  3. Both ends negotiate the intended link with stable signal margin and zero recurring physical errors.
  4. A physical link map and switch neighbor records match the intended host-to-leaf attachments.

Explanation

Correct Answer

C:

Both ends negotiate the intended link with stable signal margin and zero recurring physical errors. This observation tests the stated optical transceiver matching correction rather than unrelated node health. The underlying principle is: Optical link establishment depends on compatible modules, fiber, and optical budget at both ends.

Incorrect Answers

A:

The acceptance package includes GPU diagnostics, link checks, thermal data, and representative workload results for both servers. That is acceptance evidence for burn-in acceptance order; it does not establish that optical transceiver matching has been corrected. The relevant observation is: Both ends negotiate the intended link with stable signal margin and zero recurring physical errors.

B:

Receive optical power and both directional link indicators return to supported ranges. That is acceptance evidence for fiber polarity troubleshooting; it does not establish that optical transceiver matching has been corrected. The relevant observation is: Both ends negotiate the intended link with stable signal margin and zero recurring physical errors.

D:

A physical link map and switch neighbor records match the intended host-to-leaf attachments. That is acceptance evidence for cable map acceptance; it does not establish that optical transceiver matching has been corrected. The relevant observation is: Both ends negotiate the intended link with stable signal margin and zero recurring physical errors.

Question 87

At an AI infrastructure site, two 400G switches cannot form a link after installation; the patch uses optics whose supported reach and fiber type do not match the cabling. Which technical principle BEST explains the specific failure or solution in this scenario?

  1. Related device firmware components may depend on mutually compatible version combinations.
  2. Reliable maintenance needs persistent correspondence between a device and its current host/slot.
  3. Dual cables do not provide electrical redundancy when a surviving circuit cannot carry the load.
  4. Optical link establishment depends on compatible modules, fiber, and optical budget at both ends.

Explanation

Correct Answer

D:

Optical link establishment depends on compatible modules, fiber, and optical budget at both ends. This is why the operational remedy in this scenario is: Check vendor-supported transceiver standard, wavelength, media, reach, and port compatibility, then correct the pair. A direct demonstration is: Both ends negotiate the intended link with stable signal margin and zero recurring physical errors.

Incorrect Answers

A:

Related device firmware components may depend on mutually compatible version combinations. That principle fits coordinated hgx firmware baseline, but does not explain the optical transceiver matching failure mechanism. The applicable explanation is: Optical link establishment depends on compatible modules, fiber, and optical budget at both ends.

B:

Reliable maintenance needs persistent correspondence between a device and its current host/slot. That principle fits gpu replacement identity tracking, but does not explain the optical transceiver matching failure mechanism. The applicable explanation is: Optical link establishment depends on compatible modules, fiber, and optical budget at both ends.

C:

Dual cables do not provide electrical redundancy when a surviving circuit cannot carry the load. That principle fits redundant power feed sizing, but does not explain the optical transceiver matching failure mechanism. The applicable explanation is: Optical link establishment depends on compatible modules, fiber, and optical budget at both ends.

Question 88

At an AI infrastructure site, two 400G switches cannot form a link after installation; the patch uses optics whose supported reach and fiber type do not match the cabling. If the described issue remains uncorrected, which consequence is the MOST direct operational risk?

  1. Training traffic may intermittently fail while ordinary hardware discovery appears healthy.
  2. Miswired devices can enter the cluster with ambiguous network ownership and cause a wider outage.
  3. A mismatched optic can produce a dark link or intermittent loss under traffic.
  4. Unauthorized users could gain a lower-level path into a secured training server.

Explanation

Correct Answer

C:

A mismatched optic can produce a dark link or intermittent loss under traffic. This follows from the specific unresolved optical transceiver matching condition. An appropriate mitigation is: Check vendor-supported transceiver standard, wavelength, media, reach, and port compatibility, then correct the pair.

Incorrect Answers

A:

Training traffic may intermittently fail while ordinary hardware discovery appears healthy. That is a consequence of post-flash device fault detection, not the most direct risk of the stated optical transceiver matching defect. The scenario-specific exposure is: A mismatched optic can produce a dark link or intermittent loss under traffic.

B:

Miswired devices can enter the cluster with ambiguous network ownership and cause a wider outage. That is a consequence of installation hold points, not the most direct risk of the stated optical transceiver matching defect. The scenario-specific exposure is: A mismatched optic can produce a dark link or intermittent loss under traffic.

D:

Unauthorized users could gain a lower-level path into a secured training server. That is a consequence of bmc credential hardening, not the most direct risk of the stated optical transceiver matching defect. The scenario-specific exposure is: A mismatched optic can produce a dark link or intermittent loss under traffic.

Question 89

At an AI infrastructure site, a newly cabled high-speed fabric has one optical pair down; transceiver alarms indicate no receive light although transmit power is normal. Which operational response MOST directly resolves the specific blocker described before this equipment or service is accepted?

  1. Take the server out of service and inspect supported slot seating, risers, auxiliary power, and vendor service documentation.
  2. Inspect connector orientation, fiber polarity, and patch continuity using an approved test method.
  3. Follow the hardware service guide for quiescence, power isolation, antistatic handling, and supported replacement steps.
  4. Complete device-level and interconnect validation before signing off application-level workload acceptance.

Explanation

Correct Answer

B:

Inspect connector orientation, fiber polarity, and patch continuity using an approved test method. This addresses the reported fiber polarity troubleshooting blocker, because optical receivers need light delivered through the correct end-to-end fiber path. The acceptance evidence is: Receive optical power and both directional link indicators return to supported ranges.

Incorrect Answers

A:

Take the server out of service and inspect supported slot seating, risers, auxiliary power, and vendor service documentation. This is an appropriate response to pcie server seating check, but the described incident is fiber polarity troubleshooting rather than that separate fault. It would not directly establish the required correction: Inspect connector orientation, fiber polarity, and patch continuity using an approved test method.

C:

Follow the hardware service guide for quiescence, power isolation, antistatic handling, and supported replacement steps. This is an appropriate response to gpu field installation safety, but the described incident is fiber polarity troubleshooting rather than that separate fault. It would not directly establish the required correction: Inspect connector orientation, fiber polarity, and patch continuity using an approved test method.

D:

Complete device-level and interconnect validation before signing off application-level workload acceptance. This is an appropriate response to burn-in acceptance order, but the described incident is fiber polarity troubleshooting rather than that separate fault. It would not directly establish the required correction: Inspect connector orientation, fiber polarity, and patch continuity using an approved test method.

Question 90

At an AI infrastructure site, a newly cabled high-speed fabric has one optical pair down; transceiver alarms indicate no receive light although transmit power is normal. Which evidence MOST directly shows that the specific blocker in this scenario has been corrected?

  1. NVIDIA SMI reports the expected devices, driver version, state, and telemetry without errors.
  2. Receive optical power and both directional link indicators return to supported ranges.
  3. A physical link map and switch neighbor records match the intended host-to-leaf attachments.
  4. All four nodes report approved firmware versions, with post-update health and rollback evidence.

Explanation

Correct Answer

B:

Receive optical power and both directional link indicators return to supported ranges. This observation tests the stated fiber polarity troubleshooting correction rather than unrelated node health. The underlying principle is: Optical receivers need light delivered through the correct end-to-end fiber path.

Incorrect Answers

A:

NVIDIA SMI reports the expected devices, driver version, state, and telemetry without errors. That is acceptance evidence for nvidia smi bring-up baseline; it does not establish that fiber polarity troubleshooting has been corrected. The relevant observation is: Receive optical power and both directional link indicators return to supported ranges.

C:

A physical link map and switch neighbor records match the intended host-to-leaf attachments. That is acceptance evidence for cable map acceptance; it does not establish that fiber polarity troubleshooting has been corrected. The relevant observation is: Receive optical power and both directional link indicators return to supported ranges.

D:

All four nodes report approved firmware versions, with post-update health and rollback evidence. That is acceptance evidence for coordinated hgx firmware baseline; it does not establish that fiber polarity troubleshooting has been corrected. The relevant observation is: Receive optical power and both directional link indicators return to supported ranges.

NCP-AI Infrastructure (NCP-AII) Practice Tests

SPECIAL OFFER: GET 10% OFF
This is ONE TIME OFFER

You save
10%

Enter Your Email Address to Receive Your 10% Off Discount Code

SPECIAL OFFER: GET 10% OFF

You save
10%

Use Discount Code:

A confirmation link was sent to your e-mail.

Please check your mailbox for a message from support@examlabs.com and follow the directions.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your email address below to get started with our interactive software demo of your free trial.

  • Realistic exam simulation and exam editor with preview functions
  • Whole exam in a single file with several different question types
  • Customizable exam-taking mode & detailed score reports