View Full Omnissa 1H0_25 Exam Dumps and Practice Test Dumps.

Q341. When configuring the PCoIP External URL on Unified Access Gateway, which format is required?

1. An HTTPS FQDN only
   2. An IPv4 address with the PCoIP port
   3. An Active Directory domain name
   4. A Connection Server LDAP URL

Correct Answer: 2. An IPv4 address with the PCoIP port

Explanation: Unified Access Gateway uses the PCoIP External URL to tell Horizon Client where to establish a PCoIP session. Current Omnissa guidance specifies that this value must contain an IPv4 address rather than a hostname. Port 4172 is normally used for PCoIP, so a typical entry contains an address followed by :4172. This differs from Blast and Tunnel external URLs, which commonly use HTTPS URLs containing client-resolvable hostnames. Correctly configuring the PCoIP address is essential because an unreachable or incorrectly formatted value can prevent external users from establishing their PCoIP sessions through Unified Access Gateway.

Q342. If no port is specified in a Unified Access Gateway Blast External URL, which TCP port is used by default?

1. 443
   2. 4172
   3. 8443
   4. 3389

Correct Answer: 3. 8443

Explanation: Unified Access Gateway’s Blast External URL identifies where Horizon Client establishes a Horizon Blast or BEAT connection. According to current Omnissa documentation, if the administrator does not explicitly provide a TCP port in this URL, port 8443 is used by default. The default UDP port is also 8443 when it is not explicitly specified. This is different from Horizon Tunnel traffic, which commonly defaults to TCP 443, and PCoIP, which typically uses 4172. Administrators should ensure that the corresponding firewall and load-balancer rules permit the configured Blast ports from the appropriate client networks.

Q343. Which default port is used by the Unified Access Gateway Tunnel External URL when no TCP port is explicitly specified?

1. 8443
   2. 4172
   3. 3389
   4. 443

Correct Answer: 4. 443

Explanation: The Tunnel External URL is used by Horizon Client when establishing Horizon Tunnel connections through Unified Access Gateway. If the administrator provides an HTTPS URL without specifying a TCP port, Unified Access Gateway uses port 443 by default. The tunnel carries supported traffic such as RDP, USB redirection, and multimedia redirection. Blast traffic has separate configuration and commonly uses port 8443 when no port is provided, while PCoIP normally uses port 4172. Keeping the external URL and firewall configuration consistent is critical because clients rely on the published URL to know where to establish tunnel traffic.

Q344. Which Horizon Connection Server gateway setting is enabled by default according to Omnissa security guidance?

1. Use Secure Tunnel connection to machine
   2. Use PCoIP Secure Gateway
   3. Use Blast Secure Gateway
   4. Disable all direct desktop connections

Correct Answer: 1. Use Secure Tunnel connection to machine

Explanation: Horizon security documentation states that the Use Secure Tunnel connection to machine setting is enabled by default on Connection Server. When enabled, Horizon Client makes an additional HTTPS connection through the connection broker for supported tunnel traffic. If the setting is disabled and network connectivity permits it, the client can connect directly to the remote desktop or RDS host instead. PCoIP Secure Gateway and Blast Secure Gateway are documented as disabled by default in the referenced server settings. Administrators should select gateway behavior according to network segmentation, client reachability, and security requirements rather than relying only on defaults.

Q345. What is the default state of Use PCoIP Secure Gateway for PCoIP connections to machine on Horizon Connection Server?

1. Disabled
   2. Enabled and locked
   3. Enabled only for internal users
   4. Enabled only for HTML Access

Correct Answer: 2. Disabled

Explanation: Omnissa documents the PCoIP Secure Gateway setting as disabled by default. When the gateway is disabled and networking allows direct connectivity, a PCoIP session is established directly between Horizon Client and the Horizon desktop or RDS host rather than being tunneled through the Connection Server. Enabling the gateway changes that session path so PCoIP traffic passes through the connection broker host. The correct choice depends on network architecture and security policy. HTML Access does not use PCoIP in the manner described here, and the setting is not automatically enabled only for specific internal user populations.

Q346. What is the default state of Use Blast Secure Gateway for Blast connections to machine on Horizon Connection Server?

1. Always enabled
   2. Enabled only for administrators
   3. Enabled only when PCoIP is disabled
   4. Disabled

Correct Answer: 4. Disabled

Explanation: Current Horizon security documentation lists Use Blast Secure Gateway for Blast connections to machine as disabled by default. When it is disabled, supported Horizon Blast clients and browsers can connect directly to the remote desktop or RDS host if the network path permits this. When it is enabled, Blast traffic uses the secure gateway on the Connection Server. Administrators may choose the gateway path when they need to keep client systems from directly reaching desktop networks or when network security policy requires tunneling. This setting is independent of whether PCoIP is enabled and is not limited to administrator sessions.

Q347. What requirement applies to the hostname used in a Horizon Connection Server secure tunnel external URL?

1. It should be a client-resolvable hostname that clients can actually use to reach the server
   2. It must always be localhost
   3. It must match the Active Directory forest root name
   4. It must be the vCenter Server hostname

Correct Answer: 1. It should be a client-resolvable hostname that clients can actually use to reach the server

Explanation: Horizon external URLs must represent addresses that Horizon Client systems can actually resolve and reach. For a secure tunnel external URL, administrators normally configure an HTTPS URL containing a client-resolvable hostname and port. Using a hostname that clients cannot resolve will prevent successful external access. Certificate identity also matters: using an IP address merely because the hostname is not resolvable can lead to a mismatch with the Connection Server TLS certificate and cause blocked access or reduced security. The URL does not need to equal the Active Directory forest name or the vCenter Server hostname.

Q348. During smart card authentication to Horizon Connection Server, what does Connection Server send to the client before the user certificate is selected?

1. The user’s Active Directory password
   2. The Horizon Events database connection string
   3. A list of trusted certificate authorities
   4. The App Volumes package list

Correct Answer: 3. A list of trusted certificate authorities

Explanation: When Horizon Connection Server is configured for smart card authentication, it sends the client a list of certificate authorities that it trusts. The client compares that list with the certificates available from the user’s smart card and local certificate store. It then chooses an appropriate certificate or prompts the user to select one when multiple valid certificates are available. The user is also prompted for the smart card PIN. This process helps ensure that the client presents a certificate issued by an authority trusted by Horizon. Passwords, application packages, and database connection information are not transmitted as part of this certificate-selection process.

Q349. After Horizon Client identifies a suitable smart card certificate, what does it normally request from the user?

1. The smart card PIN
   2. The vCenter administrator password
   3. A UAG recovery code
   4. A new Windows product key

Correct Answer: 4. The smart card PIN

Explanation: Smart card authentication requires the user to prove possession and authorization to use the certificate stored on the smart card. Once the client finds an appropriate certificate issued by a trusted CA, Horizon Client prompts the user for the smart card PIN. If several valid certificates are available, the user can first be prompted to select the appropriate one. The certificate is then provided to Connection Server for trust and validity checks. This process does not require the user to know a vCenter password, a Unified Access Gateway recovery code, or a Windows product key.

Q350. Which prerequisite is required when configuring smart card authentication on Horizon Connection Server?

1. Disable all certificate checking
   2. Add the appropriate root certificate to the server trust configuration
   3. Remove TLS from Connection Server
   4. Disable Active Directory permanently

Correct Answer: 2. Add the appropriate root certificate to the server trust configuration

Explanation: Smart card authentication depends on certificate trust. Omnissa’s configuration guidance requires administrators to obtain the appropriate root certificate and add it to the server truststore or applicable trust configuration before completing the Connection Server smart card settings. Horizon must be able to validate the user’s smart card certificate back to a trusted certificate authority. Disabling certificate checking would undermine the security model, while removing TLS or Active Directory would not satisfy the authentication requirements. Administrators should also verify client middleware, card readers, valid user certificates, revocation handling, and any required certificate-mapping rules as part of the complete deployment.

Q351. Why does Omnissa recommend stronger certificate mappings instead of relying only on UPN-based smart card certificate mapping?

1. UPN mapping increases Blast bandwidth
   2. UPN mapping prevents App Volumes assignments
   3. UPN-based certificate validation is considered weak under newer Microsoft certificate-authentication security requirements
   4. UPN mapping disables Horizon Client logging

Correct Answer: 3. UPN-based certificate validation is considered weak under newer Microsoft certificate-authentication security requirements

Explanation: Omnissa’s current smart card configuration guidance references Microsoft’s strengthened certificate-based authentication requirements and notes that relying on user principal name mappings is considered weak. Administrators should move to stronger supported certificate-mapping methods to avoid authentication disruption and improve security. This is especially important as Microsoft enforcement changes affect how certificate identities are mapped to Active Directory users. The issue is related to identity assurance and certificate mapping, not Horizon Blast performance, App Volumes assignments, or client logging. Horizon administrators responsible for smart card environments should review current Microsoft and Omnissa certificate-mapping guidance before enforcement deadlines.

Q352. Which authentication capability is available to users from a Horizon domain configured as untrusted?

1. SAML authentication, including supported True SSO integration
   2. Only local Windows authentication
   3. No certificate-based authentication of any kind
   4. Only unauthenticated kiosk access

Correct Answer: 1. SAML authentication, including supported True SSO integration

Explanation: Horizon allows users from configured untrusted domains to use supported authentication methods beyond traditional username-and-password access. Current Omnissa documentation specifically states that users from an untrusted domain can use SAML authentication and can also use True SSO with SAML. Smart card authentication is supported as well when correctly configured. This flexibility allows organizations to keep user domains separate from the Connection Server domain without establishing a formal Active Directory trust relationship. The domain bind mechanism provides directory lookup capability, while SAML or smart card technologies can still provide secure authentication for users from the remote domain.

Q353. Under which condition can Horizon domain bind support additional UPNs on a remote domain?

1. Only when every user is a Domain Admin
   2. Only when App Volumes is disabled
   3. Only when the remote domain is a child domain
   4. When the Connection Server domain has no trust relationship with the remote domain

Correct Answer: 4. When the Connection Server domain has no trust relationship with the remote domain

Explanation: Omnissa documents support for additional UPNs on remote domains through the Horizon domain bind feature, provided that the Connection Server domain is not in a trust relationship with the remote domain. Domain bind is intended specifically to allow Horizon to communicate with user domains without creating a formal Active Directory trust. The primary bind account is used for directory queries and lookups, with optional auxiliary accounts available for resilience. The capability does not depend on Domain Admin membership, App Volumes status, or whether the remote domain is a child domain.

Q354. What is the purpose of configuring auxiliary domain bind accounts for an untrusted Horizon user domain?

1. To provide alternative directory-query credentials if the primary bind account becomes inaccessible
   2. To provide a second Horizon display protocol
   3. To assign applications to users
   4. To replace DNS servers

Correct Answer: 1. To provide alternative directory-query credentials if the primary bind account becomes inaccessible

Explanation: Horizon uses the primary domain bind account to query and perform lookups in an untrusted Active Directory domain. Administrators can configure multiple auxiliary bind accounts to improve resiliency. If the primary account becomes inaccessible, locked out, or otherwise unusable, Horizon can use an auxiliary account for the required directory queries. This reduces dependence on one set of credentials and can help maintain user access during an account problem. Auxiliary accounts do not act as Horizon display protocols, application assignments, or DNS servers. They are specifically fallback credentials for communication with the configured untrusted user domain.

Q355. After changing external URLs on a Horizon Connection Server instance through Horizon Console, what additional action is normally required?

1. Restart every Horizon Client
   2. No Connection Server restart is required for the URL changes to take effect
   3. Reinstall Connection Server
   4. Recreate all desktop pools

Correct Answer: 2. No Connection Server restart is required for the URL changes to take effect

Explanation: Omnissa documents that updates to the Connection Server secure tunnel, PCoIP, and Blast external URLs take effect immediately after they are saved in Horizon Console. Administrators do not need to restart the Connection Server simply to activate those URL changes. This helps reduce disruption when correcting externally published addresses or adjusting connection-path configuration. However, administrators must still ensure that DNS, TLS certificates, firewalls, and any load balancers are consistent with the newly configured URLs. Changing an external URL does not require desktop pools to be recreated or Horizon Client to be reinstalled.

Q356. A Unified Access Gateway has multiple Blast External URLs configured for different network segments. How does UAG choose the appropriate URL for a connecting Horizon Client?

1. It selects a URL randomly
   2. It always uses the alphabetically first URL
   3. It compares the incoming HTTP Host header with the configured URL entries
   4. It asks vCenter Server to choose

Correct Answer: 3. It compares the incoming HTTP Host header with the configured URL entries

Explanation: Unified Access Gateway supports additional Blast External URLs for deployments in which users reach the same UAG appliance through different hostnames, such as separate internal and external DNS names. When a Horizon Client connects, UAG examines the HTTP Host header and compares it with the configured entries. If a match is found, the corresponding Blast External URL is used for the desktop or application launch. If no match exists, UAG falls back to the primary Blast External URL. This behavior allows one appliance to provide context-appropriate Blast connection information without requiring separate UAG appliances for every hostname.

Q357. Which requirement applies to the Unified Access Gateway PCoIP External URL?

1. It must use IPv4 rather than a hostname
   2. It must always use an HTTPS FQDN
   3. It must match the UAG appliance hostname exactly
   4. It must use port 8443

Correct Answer: 1. It must use IPv4 rather than a hostname

Explanation: Unified Access Gateway requires the PCoIP External URL to be expressed using an IPv4 address rather than a DNS hostname. A typical value includes the appliance’s externally reachable IPv4 address with port 4172. This differs from Blast and Tunnel external URLs, which are represented as URLs and commonly use DNS hostnames. Administrators must ensure the PCoIP address is reachable from the client network and that the necessary firewall paths are open. Using an HTTPS FQDN or port 8443 would describe Blast-related connectivity rather than the documented PCoIP external-address format.

Q358. Which values can the Unified Access Gateway Connection Server IP mode support according to current Horizon edge-service settings?

1. IPv4 only
   2. IPv6 only
   3. IPv4 and IPv6, but never mixed mode
   4. IPv4, IPv6, or IPv4+IPv6

Correct Answer: 4. IPv4, IPv6, or IPv4+IPv6

Explanation: Unified Access Gateway includes a Connection Server IP mode setting that describes the IP addressing mode of the Horizon Connection Server environment. Current Omnissa documentation lists IPv4, IPv6, and IPv4+IPv6 as available values, subject to the networking mode supported by the UAG appliance itself. The default value is IPv4. This setting helps UAG communicate appropriately with the back-end Horizon broker environment when IPv6 or mixed addressing is used. Administrators should coordinate UAG NIC configuration, Connection Server addressing, DNS resolution, routing, and firewall rules rather than changing the IP mode in isolation.

Q359. Which traffic type is specifically identified as using the Horizon secure tunnel through Unified Access Gateway when tunnel functionality is enabled?

1. vCenter management API traffic
   2. App Volumes database replication
   3. RDP, USB, and multimedia redirection traffic
   4. Active Directory replication

Correct Answer: 3. RDP, USB, and multimedia redirection traffic

Explanation: Unified Access Gateway’s Enable Tunnel option activates the Horizon secure tunnel, and current documentation identifies supported traffic such as RDP, USB redirection, and multimedia redirection as using this tunnel. The Tunnel External URL tells Horizon Client where to establish that secure tunnel connection. Blast and PCoIP use their own external URL and gateway settings. The Horizon tunnel is not intended for vCenter API communication, App Volumes database synchronization, or Active Directory replication. Administrators should understand these traffic paths when building firewall rules because different Horizon functions can use different protocols and gateway channels.

Q360. An administrator is designing highly available external Horizon access with Unified Access Gateway. What does current Omnissa guidance recommend for the Connection Server targets?

1. Use one UAG only and one Connection Server only
   2. Deploy at least two UAG appliances and point them to different Connection Servers
   3. Install Connection Server directly on each UAG appliance
   4. Point every UAG to Horizon Client endpoints instead of Connection Server

Correct Answer: 2. Deploy at least two UAG appliances and point them to different Connection Servers

Explanation: For a highly available Horizon edge design, Omnissa recommends deploying at least two Unified Access Gateway appliances and configuring them with different Connection Servers as their back-end Horizon targets. This reduces dependence on a single gateway or Connection Server and helps maintain external access when one component is unavailable. The UAG appliance remains a separate edge-security component and should not host Connection Server itself. Horizon Client endpoints are consumers of the service, not back-end proxy destinations. Organizations can combine multiple UAG appliances with built-in UAG High Availability or appropriate external load-balancing designs depending on their requirements.