View Full HP HPE6-A85 Exam Dumps and Practice Test Dumps.

Question 281. What does a Central site represent?

1. A firmware image
2. A physical device location
3. A RADIUS role
4. A VLAN profile

Correct Answer: 2. A physical device location

Explanation:

A site in HPE Aruba Networking Central represents a physical location where managed network devices are installed. A site can contain devices such as APs, gateways, and switches. Sites help administrators organize infrastructure geographically and provide a useful context for monitoring, reporting, and troubleshooting. For example, all devices deployed in one office or campus can be associated with the corresponding site. Sites are different from labels because a site primarily identifies physical location, while labels provide flexible logical tagging.

Question 282. What is a Central label?

1. A device license
2. A firmware version
3. A routing protocol
4. A logical device tag

Correct Answer: 4. A logical device tag

Explanation:

Labels are tags attached to devices in HPE Aruba Networking Central. They can identify characteristics such as ownership, department, deployment area, or another useful logical category. Labels can also be used to filter devices during monitoring or reporting and can assist with device searches. Unlike sites, labels do not primarily define physical location. For example, devices at one site might be labeled according to floor, business unit, or operational role. HPE documents support for assigning multiple label tags to a device.

Question 283. What can labels help filter?

1. Devices
2. Passwords
3. DHCP leases
4. Certificates only

Correct Answer: 1. Devices

Explanation:

Central labels provide a convenient way to create logical sets of devices and then use those tags as filters. Administrators can use labels while monitoring the network, generating reports, or locating devices through search. This is especially useful when the physical site alone does not provide enough detail. For example, all lobby APs or finance-department switches across one or more locations can be tagged consistently. Labels therefore improve organization and operational filtering without changing the underlying network configuration of the tagged devices.

Question 284. What does Device Inventory provide?

1. RF encryption
2. Only subscription data
3. Centralized device information
4. Only client passwords

Correct Answer: 3. Centralized device information

Explanation:

The Device Inventory page provides a centralized view of network devices known to HPE Aruba Networking Central. Administrators can see information such as device name, type, model, serial number, IP address, subscription, site assignment, onboarding status, and provisioning state. The inventory can also be searched, filtered, and sorted to locate relevant devices quickly. This makes Device Inventory an important starting point for onboarding, assignment, and operational management because it brings device identity and assignment information into one consolidated view.

Question 285. What does “Without Site” mean?

1. Device has no IP address
2. Device is offline
3. Device has no subscription
4. Device is not assigned to a site

Correct Answer: 4. Device is not assigned to a site

Explanation:

The Inventory and Subscriptions card includes a without site count that identifies devices not currently assigned to any site. Selecting this count can take the administrator to the Device Inventory view with the relevant unassigned filter applied. This helps identify devices that may have been added to inventory but have not yet been placed into the correct physical-location context. A device without a site is not necessarily offline or unlicensed; those conditions are tracked separately.

Question 286. What does “Without Subscription” mean?

1. Device has no assigned subscription
2. Device has no site
3. Device has no hostname
4. Device has no VLAN

Correct Answer: 1. Device has no assigned subscription

Explanation:

The without subscription value identifies devices that do not currently have an applicable HPE Aruba Networking Central subscription assigned. The Inventory and Subscriptions card provides this information so administrators can quickly locate devices requiring subscription attention. Selecting the relevant count opens the inventory with an unsubscribed-device filter. Subscription state is separate from site assignment and device reachability. A device can therefore appear in inventory and even have location information while still lacking the subscription required for normal Central service management.

Question 287. What can Central show about subscriptions?

1. STP root priority
2. Available subscription count
3. OSPF cost
4. AP radio password

Correct Answer: 2. Available subscription count

Explanation:

The Inventory and Subscriptions card provides an overview of subscription usage, including the number of available subscriptions. It also provides visibility into subscriptions that are nearing expiration and devices that currently lack subscriptions. This helps administrators track licensing capacity and identify situations that could affect future device management. Clicking subscription-related values can direct the administrator to more detailed subscription information. Subscription monitoring is an administrative function and does not control routing metrics, spanning-tree behavior, or WLAN credentials.

Question 288. What can Central warn about?

1. Only VLAN errors
2. Only DHCP failures
3. Subscriptions nearing expiration
4. Only PoE faults

Correct Answer: 3. Subscriptions nearing expiration

Explanation:

HPE Aruba Networking Central can display a warning when subscriptions are approaching expiration. The Inventory and Subscriptions card documents a banner for subscriptions expiring within 90 days. Administrators can follow the provided view to inspect the relevant subscription keys and take action before expiration affects operations. This proactive visibility helps prevent unexpected licensing issues. The warning is part of subscription administration and is separate from operational alarms such as VLAN, DHCP, or PoE problems.

Question 289. What does a device function describe?

1. The device’s network role
2. Its serial number
3. Its subscription expiry
4. Its MAC vendor

Correct Answer: 1. The device’s network role

Explanation:

A device function identifies the operational role a device performs in the network. HPE Aruba Networking Central supports functions such as Access Switch, Aggregation Switch, Core Switch, Mobility AP, Microbranch AP, and Mobility Gateway. Assigning the correct function helps Central apply appropriate configuration and operational workflows. For supported switches, device function is one of the assignments required before full Central configuration. It therefore describes what the device does in the architecture rather than simply identifying its hardware or subscription status.

Question 290. Where is device function assigned?

1. Audit Trail
2. Reports page
3. AI Insights
4. Device Inventory

Correct Answer: 4. Device Inventory

Explanation:

The Device Inventory page provides the workflow for assigning device functions to supported devices. Administrators can select one or more devices of the same type, choose Assign, and select the appropriate function. The selected role is then displayed in the Device Function column. HPE notes that assigning a device function to third-party switches is not currently supported. Device function assignment is therefore part of inventory and provisioning management rather than reporting, audit, or AI analysis.

Question 291. Which role has read-only Central access?

1. Administrator
2. View Only
3. Guest Operator
4. Operator

Correct Answer: 2. View Only

Explanation:

The built-in aruba central view only role provides read-only access to HPE Aruba Networking Central. It is appropriate for users who need to monitor network information but should not make configuration changes. HPE also provides Administrator, Operator, and Guest Operator roles with different permission levels. Using role-based access control helps organizations follow least-privilege principles by giving each administrator only the permissions required for their job responsibilities.

Question 292. Which role has unrestricted Central access?

1. View Only
2. Guest Operator
3. Administrator
4. Operator

Correct Answer: 3. Administrator

Explanation:

The built-in aruba central administrator role has complete access to Central resources without the restrictions applied to more limited roles. This role is therefore appropriate only for trusted administrators who genuinely need full management capability. HPE also provides lower-privilege built-in roles, such as View Only and Operator, to help organizations avoid granting unnecessary administrative power. RBAC should be used to align permissions with job responsibilities and reduce the risk associated with overprivileged accounts.

Question 293. What does RBAC control?

1. AP radio power
2. VLAN tagging
3. Link speed
4. User permissions

Correct Answer: 4. User permissions

Explanation:

Role-Based Access Control determines what an administrator or user is permitted to view or change. In HPE Aruba Networking Central, roles contain defined permissions, ranging from full administrative access to read-only or limited operational access. RBAC can also work with scope restrictions so the same type of role applies only to selected sites or network resources. This provides more granular administrative control than simply giving every operator the same level of access.

Question 294. What can a scope group restrict?

1. Resource access
2. RF channel width
3. DHCP lease time
4. LACP hashing

Correct Answer: 2. Resource access

Explanation:

HPE GreenLake scope groups can restrict a user’s Central permissions to specific network resources. HPE documents supported Central scopes such as Sites, Site Collections, and Device Groups. This means an administrator can have a particular role but be allowed to exercise that role only within an approved part of the organization. For example, a regional operator might receive operational permissions only for sites in that region. Scope groups therefore add a resource boundary to RBAC rather than modifying wireless or switching behavior.

Question 295. What can a site dashboard summarize?

1. Site health and clients
2. Only passwords
3. Only certificates
4. Only LACP groups

Correct Answer: 1. Site health and clients

Explanation:

The Central site dashboard provides a consolidated operational view for devices assigned to a selected site. HPE documents information including device health, client connectivity statistics, change logs, RF health, bandwidth usage, client counts, and top devices or clients by usage. This lets administrators investigate one physical location without filtering through the complete global deployment. The site dashboard is therefore particularly useful for branch, office, or campus-level monitoring and troubleshooting.

Question 296. What can Device Inventory filter by?

1. Password complexity
2. Firmware checksum only
3. Device type or site
4. OSPF area only

Correct Answer: 3. Device type or site

Explanation:

Device Inventory supports filters that help administrators narrow large device lists quickly. HPE documents filtering based on criteria such as device type and site assignment, including assigned and unassigned devices. Search can also locate devices using information such as device name or model. These filtering tools are especially useful in large deployments where manually scanning the full inventory would be inefficient. Inventory filtering does not inspect passwords or routing-protocol areas.

Question 297. What must a switch have for Central configuration?

1. Only a hostname
2. Subscription, site, and device function
3. Only an IP address
4. Only a label

Correct Answer: 2. Subscription, site, and device function

Explanation:

HPE’s current standalone AOS-CX onboarding guidance states that a switch needs three important assignments for configuration in Central: a subscription, a site, and a device function. The subscription is handled through HPE GreenLake or automatic assignment, the site places the device in the appropriate location context, and the device function identifies its architectural role. If one of these assignments is missing, the device may appear in inventory but not be fully ready for Central configuration workflows.

Question 298. How can multiple gateways be added quickly?

1. One CLI at a time
2. Through NTP
3. Through SNMP traps
4. CSV upload

Correct Answer: 4. CSV upload

Explanation:

HPE GreenLake onboarding supports adding multiple gateways using a CSV file containing required device information such as serial numbers and MAC addresses. This is more efficient than entering every device individually when onboarding a larger deployment. For individual devices, administrators can also add them manually using serial-number and MAC-address information. After inventory addition, the devices can be assigned to the Central service, given subscriptions, and placed into the appropriate organizational structure.

Question 299. What happens after removing a device assignment?

1. The device is unprovisioned
2. Its hardware is erased
3. Its serial changes
4. Its subscription doubles

Correct Answer: 3. The device is unprovisioned

Explanation:

HPE documentation states that removing a device assignment through the HPE GreenLake platform causes the device to be unprovisioned from its Central site and group. Its site association is removed, and the device moves to an unassigned state. The hardware identity itself does not change, but the organizational and provisioning relationships used by Central are removed. To restore the device association, the administrator must assign it appropriately again. This behavior is important to understand before removing assignments from production devices.

Question 300. Which design BEST organizes Central devices?

1. Sites, device functions, subscriptions, and RBAC
2. One shared admin account
3. No site assignments
4. Labels only

Correct Answer: 1. Sites, device functions, subscriptions, and RBAC

Explanation:

A well-organized Central deployment combines several management constructs. Sites identify physical locations, device functions define architectural roles, and subscriptions enable the appropriate Central services. RBAC ensures administrators receive only the permissions and resource scope required for their duties. Labels can provide additional logical tagging but are not a substitute for these foundational assignments. Together, these mechanisms improve scalability, operational clarity, licensing visibility, and administrative security across a large HPE Aruba Networking environment.