View Full Nutanix NCA Exam Dumps and Practice Test Dumps

 

Question 141.

An administrator needs to monitor resource utilization and alerts for several Nutanix clusters from one management interface. Which component should be used?

1. Prism Central
   2. Foundation
   3. Nutanix Move
   4. Nutanix Cluster Check

Correct Answer: 1

Explanation:

Prism Central provides centralized management and monitoring capabilities across multiple Nutanix clusters. Administrators can use it to review virtual machines, infrastructure resources, alerts, events, and performance information from a consolidated interface. This simplifies administration when an organization operates multiple clusters. Foundation is primarily associated with imaging and initial deployment, Nutanix Move supports workload migration, and Nutanix Cluster Check performs health validation. Prism Central is therefore the appropriate choice when the administrator needs broader visibility rather than management limited to a single cluster.

Question 142.

An administrator wants to validate cluster health before performing planned maintenance. Which Nutanix tool should be used?

1. Nutanix Move
   2. Nutanix Cluster Check
   3. Foundation
   4. Virtual Network Manager

Correct Answer: 2

Explanation:

Nutanix Cluster Check, commonly called NCC, performs health and configuration checks against Nutanix infrastructure. Running appropriate NCC checks before planned maintenance can identify existing conditions that may need attention before the maintenance begins. This provides a useful baseline for determining whether the environment is ready for changes. Nutanix Move serves migration requirements, while Foundation is primarily used for imaging and initial deployment. Health validation is particularly valuable before significant infrastructure operations because existing problems can increase maintenance risk or complicate troubleshooting.

Question 143.

Which metric should an administrator examine when investigating whether a VM is experiencing sustained memory pressure?

1. Physical rack height
   2. Cluster installation date
   3. Historical VM memory utilization
   4. Node serial number

Correct Answer: 3

Explanation:

Historical VM memory utilization provides useful evidence when determining whether a workload is experiencing sustained memory pressure. Current utilization shows only a point-in-time condition, whereas historical metrics reveal recurring patterns, prolonged high utilization, and changes over time. The administrator can correlate these metrics with application behavior, alerts, and events before deciding whether a memory allocation change is appropriate. Rack dimensions, installation dates, and serial numbers provide infrastructure identification information but do not explain the memory consumption behavior of a virtual machine.

Question 144.

Which Nutanix component is responsible for providing important distributed storage services on each node?

1. Prism Central
   2. Foundation
   3. Nutanix Move
   4. Controller VM

Correct Answer: 4

Explanation:

The Controller VM, or CVM, is a core component of Nutanix architecture. A CVM runs on each Nutanix node and participates in providing distributed storage and other platform services. This design allows storage services to operate across cluster resources rather than relying on a traditional centralized storage controller. Prism Central is a management platform, Foundation supports deployment, and Nutanix Move assists with workload migration. Understanding the CVM’s role is important for understanding Nutanix distributed architecture, storage operations, resiliency, and cluster behavior.

Question 145.

What is the primary function of AHV in a Nutanix environment?

1. Provide virtualization services for virtual machines
   2. Perform firmware inventory
   3. Image physical nodes
   4. Perform only storage health checks

Correct Answer: 1

Explanation:

AHV provides the virtualization layer required to run virtual machines on Nutanix infrastructure. It integrates with the broader Nutanix platform and can be managed through Prism. Administrators can create workloads, assign CPU and memory, configure virtual disks and networks, control VM power states, and monitor workload behavior. Firmware inventory is associated with lifecycle management, node imaging is associated with Foundation, and health validation can involve NCC. AHV’s main responsibility is providing the hypervisor functionality necessary for virtualized workloads.

Question 146.

A VM was accidentally connected to an incorrect virtual network. Which action should the administrator take?

1. Change the cluster name.
   2. Assign the VM interface to the appropriate virtual network.
   3. Reimage the Nutanix node.
   4. Delete the storage container.

Correct Answer: 2

Explanation:

The administrator should modify the VM’s network configuration so its virtual network interface is connected to the appropriate network. This directly addresses the connectivity configuration without making unrelated infrastructure changes. Before modifying a production workload, the administrator should understand the intended network configuration and any possible connectivity impact. Changing the cluster name, reimaging the node, or deleting a storage container would not correct an incorrect VM network assignment and could introduce unnecessary disruption or data availability problems.

Question 147.

An administrator needs to determine whether a configuration change occurred at the same time a workload problem began. What should be reviewed?

1. Product packaging information
   2. Physical rack labels
   3. Events and relevant performance data
   4. Hardware shipping records

Correct Answer: 3

Explanation:

Events provide a timeline of operational activities and configuration changes, while performance data shows how the workload behaved over the same period. Correlating these sources can help administrators determine whether a particular change coincided with the beginning of a performance or availability problem. Alerts and health information may provide additional context. Product packaging, rack labels, and shipping information are static records and generally do not provide the operational history necessary to investigate the relationship between configuration changes and workload behavior.

Question 148.

Which Nutanix capability helps administrators inventory components and coordinate supported software and firmware upgrades?

1. Nutanix Move
   2. Foundation
   3. NCC
   4. Life Cycle Manager

Correct Answer: 4

Explanation:

Life Cycle Manager, commonly abbreviated as LCM, helps administrators inventory supported Nutanix components, identify applicable software and firmware updates, and coordinate upgrade workflows. This centralizes important lifecycle information and simplifies infrastructure maintenance. Nutanix Move focuses on workload migration, Foundation supports deployment and node imaging, and NCC performs health and configuration checks. LCM is therefore the appropriate capability when administrators need to evaluate component versions or carry out supported lifecycle operations within the Nutanix environment.

Question 149.

What is a key benefit of using storage containers in Nutanix?

1. They provide logical storage organization for workloads.
   2. They replace the AHV hypervisor.
   3. They provide physical network switching.
   4. They automatically create administrator accounts.

Correct Answer: 1

Explanation:

Storage containers provide logical storage organization within the Nutanix storage architecture. Nutanix abstracts underlying physical storage resources so administrators can provision and manage storage without assigning individual physical devices directly to workloads. This software-defined approach simplifies storage administration and allows storage policies and resources to be managed at a logical level. Storage containers do not replace AHV, provide physical network switching, or create administrator accounts. Understanding containers is important for managing virtual machine storage and interpreting the Nutanix storage architecture.

Question 150.

A virtual machine requires additional CPU resources. Which setting should the administrator modify after confirming the requirement?

1. Storage container name
   2. vCPU allocation
   3. NCC schedule
   4. Foundation configuration

Correct Answer: 2

Explanation:

The vCPU allocation determines the virtual CPU resources assigned to a VM. Before increasing this value, the administrator should review performance metrics and workload behavior to verify that CPU resources are actually constraining performance. If additional CPU is justified and sufficient cluster capacity exists, the VM configuration can be modified using the supported management workflow. Changing a storage container name, NCC schedule, or Foundation configuration would not increase the processing resources available to the workload.

Question 151.

Which Nutanix tool is designed primarily to assist with workload migration?

1. Foundation
   2. NCC
   3. Nutanix Move
   4. Life Cycle Manager

Correct Answer: 3

Explanation:

Nutanix Move is designed to assist with migration of supported workloads between virtualization environments. It can simplify several stages of a migration project and reduce the amount of manual work required to transition virtual machines. Foundation performs initial deployment and node imaging, NCC provides health validation, and Life Cycle Manager handles supported software and firmware lifecycle operations. Administrators should understand the primary purpose of each Nutanix tool so they can select the appropriate capability for migration, deployment, maintenance, monitoring, and troubleshooting tasks.

Question 152.

Which tool is most appropriate when new Nutanix nodes must be imaged during an initial cluster deployment?

1. Prism Central
   2. Nutanix Move
   3. NCC
   4. Foundation

Correct Answer: 4

Explanation:

Foundation is primarily used for Nutanix deployment activities such as imaging nodes and assisting with initial cluster creation. It automates important deployment steps and helps administrators prepare infrastructure consistently. Prism Central provides centralized operational management, Nutanix Move supports workload migration, and NCC performs cluster health checks. Recognizing Foundation as a deployment-oriented tool helps distinguish initial infrastructure provisioning from the tools used later for monitoring, lifecycle management, health validation, and day-to-day virtual machine administration.

Question 153.

Why should administrators monitor historical cluster capacity utilization?

1. To identify growth trends and anticipate resource requirements
   2. To automatically replace failed hardware
   3. To disable cluster alerts
   4. To eliminate the need for lifecycle management

Correct Answer: 1

Explanation:

Historical capacity utilization helps administrators understand how infrastructure consumption changes over time. This information can reveal sustained growth, recurring peaks, and unusual increases that may require investigation. Capacity trends also support proactive planning by helping administrators estimate when additional compute or storage resources may be required. Monitoring does not automatically replace failed hardware or eliminate alerts and lifecycle management. Instead, historical information provides evidence that administrators can use to make informed decisions before resource constraints begin affecting production workloads.

Question 154.

A responsive guest operating system needs to be shut down before application maintenance. Which operation is generally preferred?

1. Force power off.
   2. Graceful guest shutdown.
   3. Delete the VM.
   4. Remove the VM’s virtual disks.

Correct Answer: 2

Explanation:

A graceful guest shutdown is generally preferred when the operating system is responsive because it allows applications and services to terminate normally and gives pending data operations an opportunity to complete. Forced power operations are more disruptive and are generally reserved for circumstances where normal guest operations cannot be performed. Deleting the VM or removing virtual disks would be destructive and unnecessary for routine maintenance. Administrators should use supported power operations and select the least disruptive method appropriate to the workload’s current condition.

Question 155.

An administrator receives a capacity-related alert. What should be the first step in investigating it?

1. Immediately delete several VMs.
   2. Restart every host.
   3. Review the alert details and relevant capacity metrics.
   4. Reimage the cluster.

Correct Answer: 3

Explanation:

The administrator should begin by reviewing the alert details and the relevant capacity metrics. The alert can identify the affected resource and condition, while metrics provide information about current utilization and historical behavior. This helps determine whether the condition represents temporary demand, sustained growth, or a more serious capacity constraint. Deleting workloads, restarting hosts, or reimaging infrastructure without understanding the problem could cause unnecessary disruption. Evidence-based troubleshooting allows the administrator to select a corrective action appropriate to the actual capacity condition.

Question 156.

Which Nutanix management interface is primarily intended for administration of an individual cluster?

1. Nutanix Move
   2. Foundation
   3. Prism Central
   4. Prism Element

Correct Answer: 4

Explanation:

Prism Element provides management and monitoring capabilities for an individual Nutanix cluster. Administrators can use it to manage virtual machines, inspect infrastructure resources, review alerts, examine storage information, and monitor performance. Prism Central provides centralized capabilities across multiple clusters and broader environments. Nutanix Move and Foundation have specialized migration and deployment purposes. Understanding the management scope of Prism Element and Prism Central is important because administrators need to know which interface is appropriate for cluster-specific versus centralized operational tasks.

Question 157.

What is the main purpose of data replication in Nutanix storage?

1. Help provide data resiliency against supported failure scenarios.
   2. Manage VM user passwords.
   3. Create physical network switches.
   4. Perform node imaging.

Correct Answer: 1

Explanation:

Data replication contributes to Nutanix storage resiliency by maintaining workload data according to configured protection mechanisms across cluster resources. This helps the platform tolerate supported failure scenarios while maintaining appropriate access to data. The distributed storage architecture handles much of the underlying placement and protection functionality automatically. Replication is unrelated to guest user management, physical networking, or node imaging. Understanding the purpose of replication helps administrators interpret storage health, resiliency requirements, and capacity consumption within a Nutanix cluster.

Question 158.

A VM needs additional disk capacity. What should the administrator verify before expanding its virtual storage?

1. Only the VM display name
   2. Workload requirements and available cluster storage capacity
   3. The physical rack color
   4. The administrator’s workstation configuration

Correct Answer: 2

Explanation:

Before expanding a VM’s storage, the administrator should confirm the workload’s actual capacity requirement and verify that sufficient storage resources are available within the cluster. Reviewing utilization and growth trends can also help determine an appropriate expansion amount. This approach prevents unnecessary allocation and supports better capacity planning. The VM’s display name, rack appearance, and administrator workstation configuration do not establish whether additional storage can or should be allocated. Resource modifications should be based on workload requirements and infrastructure capacity.

Question 159.

Which information is most useful when investigating an unexpected VM power-state change?

1. Physical node packaging
   2. Cluster marketing documentation
   3. Relevant events and alerts
   4. Rack purchase date

Correct Answer: 3

Explanation:

Events and alerts can provide important context when investigating an unexpected VM power-state change. Events may identify administrative actions or infrastructure activities that occurred around the time of the incident, while alerts may reveal health conditions that contributed to the problem. Administrators can also correlate this information with workload and cluster performance metrics. Physical packaging, marketing documentation, and rack purchase dates do not provide an operational timeline. Reviewing events and alerts is therefore a useful starting point for determining what happened.

Question 160.

After normal troubleshooting fails to resolve a Nutanix infrastructure problem, what should an administrator do?

1. Delete the cluster immediately.
   2. Reinstall all guest operating systems.
   3. Ignore the problem if applications remain online.
   4. Collect relevant diagnostic information and escalate through the appropriate support process.

Correct Answer: 4

Explanation:

When routine troubleshooting does not resolve an infrastructure problem, administrators should collect relevant diagnostic information and escalate through the appropriate support process. Useful information may include NCC results, alerts, events, performance metrics, affected resources, timestamps, recent configuration changes, and troubleshooting steps already performed. Providing detailed context can make deeper technical investigation more efficient. Destructive actions such as deleting infrastructure or reinstalling workloads should not be performed without a justified and supported reason. Structured escalation preserves evidence and minimizes unnecessary disruption.