View Full Nutanix NCA Exam Dumps and Practice Test Dumps

 

Question 321.

An administrator wants to create a new VM using an existing VM as the starting point while retaining a similar virtual hardware configuration. Which operation should be used?

1. Clone the existing VM.
   2. Run NCC.
   3. Perform an LCM inventory.
   4. Reimage the node with Foundation.

Correct Answer: 1

Explanation:

Cloning is appropriate when an administrator wants to create a new virtual machine based on an existing VM. The clone can provide a similar starting configuration, including relevant virtual hardware and disk characteristics, after which workload-specific settings can be adjusted. This is more efficient than manually rebuilding an equivalent VM. NCC is used for health and configuration checks, LCM handles supported infrastructure lifecycle operations, and Foundation is primarily associated with imaging and initial cluster deployment. These tools do not provide the normal workflow for duplicating an existing VM.

Question 322.

A VM requires installation media for a new guest operating system. Which resource should the administrator make available and attach to the VM?

1. NCC health-check output
   2. An appropriate ISO image
   3. LCM inventory data
   4. A Controller VM disk

Correct Answer: 2

Explanation:

An ISO image containing the required operating system installation media can be made available to the Nutanix environment and attached to the target VM. The administrator can then configure the VM to boot from the appropriate installation media and complete the guest operating system installation. NCC output is diagnostic information, LCM inventory data relates to lifecycle management, and Controller VM disks are infrastructure resources that should not be used as guest installation media. ISO images provide a convenient way to supply software installation media to virtual machines.

Question 323.

Which feature should an administrator use to interact with a VM during boot when the guest network configuration is not yet available?

1. Foundation
   2. LCM
   3. VM console
   4. NCC

Correct Answer: 3

Explanation:

The VM console provides direct interactive access to the virtual machine and does not depend on normal guest network connectivity. This makes it useful during operating system installation, boot troubleshooting, network configuration, or situations where remote network access to the guest is unavailable. Foundation supports infrastructure deployment, LCM manages supported lifecycle operations, and NCC performs cluster health and configuration checks. The VM console is therefore the appropriate feature when an administrator needs direct interaction with a virtual machine before normal guest connectivity has been established.

Question 324.

An administrator starts a VM creation operation and wants to verify whether it completed successfully. What should be reviewed?

1. Rack documentation
   2. Hardware warranty records
   3. Shipping information
   4. Task or activity status in Prism

Correct Answer: 4

Explanation:

Prism provides task or activity information that allows administrators to track management operations such as VM creation and configuration changes. Reviewing the task status helps determine whether an operation completed successfully, remains in progress, or encountered an error. If the task fails, its details can provide a starting point for troubleshooting. Rack documentation, warranty records, and shipping information are static infrastructure records and do not indicate whether a management operation succeeded. Administrators should verify important changes rather than assuming completion.

Question 325.

An administrator needs to create several similar test VMs from a prepared source VM. Which capability can reduce repetitive configuration work?

1. VM cloning
   2. NCC
   3. Foundation
   4. Life Cycle Manager

Correct Answer: 1

Explanation:

VM cloning can reduce repetitive provisioning work when multiple virtual machines need configurations similar to an existing source VM. The administrator can create clones and then customize workload-specific settings as required. This can be more efficient than manually recreating the same basic virtual hardware and disk configuration repeatedly. NCC performs health checks, Foundation supports infrastructure deployment and node imaging, and Life Cycle Manager handles supported component lifecycle operations. These tools do not provide the primary VM duplication functionality required in this scenario.

Question 326.

A new VM is being sized for an application. What should primarily determine its initial CPU and memory configuration?

1. The physical rack location
   2. Expected workload requirements and available cluster resources
   3. The cluster’s display name
   4. The administrator’s workstation specifications

Correct Answer: 2

Explanation:

Initial VM sizing should be based on expected application requirements while considering the resources available in the cluster. Assigning too few resources may constrain performance, while excessive allocations can waste capacity and reduce infrastructure efficiency. Application documentation, workload characteristics, and later performance monitoring can help refine the configuration. Rack location, cluster naming, and administrator workstation specifications do not indicate how much CPU or memory a guest workload requires. VM sizing should therefore reflect actual workload demand and available infrastructure capacity.

Question 327.

Which storage metric is particularly useful when determining how many I/O operations a workload is generating?

1. Rack units
   2. CPU socket count
   3. IOPS
   4. VM display name

Correct Answer: 3

Explanation:

IOPS represents input/output operations per second and is a useful metric for understanding the level of storage I/O activity generated by a workload. Administrators can examine IOPS alongside latency, throughput, and other relevant metrics to better understand storage behavior. A high IOPS value is not automatically a problem; it must be interpreted in context with workload requirements and observed performance. Rack units, CPU socket counts, and VM names do not measure storage I/O activity. Performance troubleshooting should generally consider multiple related storage metrics together.

Question 328.

A VM needs to boot from an attached ISO rather than its normal system disk. What should the administrator verify?

1. The cluster has been reimaged.
   2. The Controller VM is powered off.
   3. NCC is disabled.
   4. The required media is attached and the VM boot configuration is appropriate.

Correct Answer: 4

Explanation:

The administrator should verify that the required ISO or other installation media is correctly attached and that the VM is configured to boot from the intended device. This allows the workload to start from installation or recovery media rather than its normal system disk. Reimaging the cluster, powering off the Controller VM, or disabling health checks would be unrelated and potentially disruptive. Boot-device configuration is performed at the VM level and should be changed only as necessary for installation, recovery, or other supported workload requirements.

Question 329.

Which feature is most useful for observing guest operating system boot messages when remote network access is unavailable?

1. VM console
   2. Foundation
   3. Nutanix Move
   4. Life Cycle Manager

Correct Answer: 1

Explanation:

The VM console provides direct access to a virtual machine’s display and is useful for observing operating system boot messages or interacting with the guest when normal remote network access is unavailable. It can help troubleshoot startup failures, network configuration problems, and operating system installation issues. Foundation is intended for infrastructure deployment, Nutanix Move supports workload migration, and Life Cycle Manager handles supported infrastructure lifecycle operations. The VM console is therefore the most relevant feature for direct guest interaction during boot and troubleshooting.

Question 330.

A VM must communicate on a specific logical network. Which configuration should the administrator modify?

1. Storage replication settings
   2. The VM’s virtual network interface assignment
   3. NCC configuration
   4. Foundation deployment settings

Correct Answer: 2

Explanation:

A VM’s virtual network interface must be associated with the appropriate logical network or subnet for the workload to communicate on that network. Administrators should verify this assignment during VM creation and when troubleshooting connectivity problems. Storage replication is related to data resiliency, NCC performs health checks, and Foundation handles initial infrastructure deployment. None of those functions determines the logical network used by a VM interface. Correct virtual network assignment is therefore a fundamental part of workload network configuration.

Question 331.

An administrator is troubleshooting a storage-intensive workload. Which combination provides the most useful storage-performance view?

1. VM name and rack position
   2. Node serial number and purchase date
   3. IOPS, latency, and related storage performance metrics
   4. Foundation version and cluster name

Correct Answer: 3

Explanation:

IOPS, latency, and related storage performance metrics provide useful information about the workload’s I/O behavior and storage response. IOPS indicates operation volume, while latency helps show how long storage operations are taking. Other relevant metrics can provide additional context depending on the workload and environment. Administrators should correlate these values over the affected time period rather than interpreting a single measurement in isolation. VM names, rack positions, serial numbers, purchase dates, and deployment-tool versions do not provide meaningful measurements of workload storage performance.

Question 332.

Before permanently deleting a VM, what is the most important administrative consideration?

1. Whether its name is sufficiently short
   2. Whether its host is the newest node
   3. Whether Prism Central has recently been upgraded
   4. Whether the workload, data, and any required recovery information are no longer needed.

Correct Answer: 4

Explanation:

Before deleting a VM, the administrator should confirm that the workload is no longer required and consider any data-retention, backup, recovery, compliance, or application-dependency requirements. VM deletion may permanently remove important resources, so the consequences should be understood before proceeding. The VM’s naming length, host age, or timing of a Prism Central upgrade does not determine whether deletion is safe. Destructive administrative actions should always be performed with a clear understanding of the workload’s role and any data that may need to be preserved.

Question 333.

What is the primary purpose of adding a virtual disk to an existing VM?

1. Provide additional storage resources to the workload.
   2. Increase the VM’s CPU count.
   3. Change the physical rack location.
   4. Perform a cluster health check.

Correct Answer: 1

Explanation:

Adding a virtual disk provides additional storage that can be presented to and used by the guest workload. Depending on application requirements, the disk may hold application data, databases, logs, or other files. Before provisioning additional storage, administrators should confirm workload requirements and available cluster capacity. A virtual disk does not increase CPU resources, change the physical rack location, or perform health checks. Storage allocation and compute allocation are separate aspects of virtual machine configuration and should be managed according to workload needs.

Question 334.

A VM has a virtual network interface but is attached to the wrong network. What should the administrator do?

1. Increase the VM memory.
   2. Assign the interface to the appropriate virtual network.
   3. Run Foundation against the VM.
   4. Replace its virtual disk.

Correct Answer: 2

Explanation:

If a VM interface is connected to the wrong logical network, the administrator should assign it to the appropriate virtual network according to the workload’s connectivity requirements. Increasing memory or replacing storage would not correct a network assignment problem, while Foundation is intended for infrastructure deployment rather than guest networking. After changing the assignment, connectivity should be verified and any additional guest networking configuration should be checked if necessary. Troubleshooting is most efficient when corrective action directly addresses the identified configuration problem.

Question 335.

Which metric should receive particular attention when users report that storage requests are taking unusually long to complete?

1. Number of cluster administrators
   2. Physical rack height
   3. Storage latency
   4. VM naming convention

Correct Answer: 3

Explanation:

Storage latency is an important metric when investigating reports that storage operations are taking longer than expected. It indicates response time for I/O activity and can help administrators identify periods where storage behavior correlates with application slowdown. Latency should be evaluated alongside IOPS, workload characteristics, historical trends, and related infrastructure information. The number of administrators, rack height, and naming conventions do not measure storage response time. Performance analysis should use relevant operational metrics and compare them with normal workload behavior.

Question 336.

An administrator changes the memory allocation of a VM. What should be done after completing the operation?

1. Reimage the node automatically.
   2. Delete the VM’s network interface.
   3. Remove the storage container.
   4. Verify task completion and confirm the intended VM configuration.

Correct Answer: 4

Explanation:

After changing a VM resource configuration, the administrator should verify that the management task completed successfully and confirm that the intended memory configuration is reflected on the VM. This validation helps detect failed or incomplete operations immediately. Reimaging a node, removing networking, or deleting a storage container would be unrelated and highly disruptive. Administrative changes should include a verification step so that the operator can confirm the desired state rather than assuming that an initiated task completed without errors.

Question 337.

What is the main value of a point-in-time recovery mechanism for a workload?

1. It can provide a recovery state associated with an earlier point in time.
   2. It replaces all physical network equipment.
   3. It automatically upgrades cluster firmware.
   4. It images newly installed nodes.

Correct Answer: 1

Explanation:

A point-in-time recovery mechanism can provide a workload state associated with an earlier point in time and may support recovery from certain data or configuration problems. Its exact use depends on the protection design and recovery requirements. Administrators should understand that snapshots or recovery points are part of a broader data-protection strategy and may not replace independent backup or disaster-recovery requirements. They do not replace network hardware, perform firmware upgrades, or image physical nodes. Their primary purpose is to support workload recovery.

Question 338.

An application owner provides CPU and memory requirements for a new VM. What should the administrator do before creating it?

1. Ignore the requirements and assign maximum resources.
   2. Compare the requirements with available cluster capacity and configure the VM appropriately.
   3. Match the resources assigned to Prism Central.
   4. Reimage the target host.

Correct Answer: 2

Explanation:

The administrator should compare the application’s CPU and memory requirements with available cluster resources and configure the VM accordingly. This helps provide sufficient workload capacity while avoiding unnecessary over-allocation. Resource sizing can later be refined using actual performance data after the workload is operational. Assigning maximum resources without justification wastes capacity, and Prism Central resource sizing is unrelated to the application’s requirements. Reimaging the host is also unnecessary. VM provisioning should balance workload needs with efficient utilization of shared infrastructure resources.

Question 339.

Storage IOPS suddenly increases for a production VM. What should the administrator do to determine whether the increase is expected?

1. Immediately shut down the cluster.
   2. Replace the VM’s network interface.
   3. Correlate the IOPS increase with workload activity, historical metrics, events, and alerts.
   4. Delete the VM.

Correct Answer: 3

Explanation:

An increase in IOPS does not automatically indicate a problem because some applications legitimately generate periods of heavy storage activity. The administrator should compare the increase with historical behavior and correlate it with workload activity, events, alerts, latency, and other relevant metrics. This helps determine whether the change is expected or associated with an infrastructure or application issue. Immediately shutting down infrastructure or deleting the VM would be inappropriate without evidence. Performance investigation should establish context before corrective action is taken.

Question 340.

A VM operation fails in Prism. What is the most appropriate initial troubleshooting action?

1. Factory-reset the cluster.
   2. Delete the storage container.
   3. Reimage the host immediately.
   4. Review the failed task details and correlate them with relevant events and alerts.

Correct Answer: 4

Explanation:

Failed task details provide important information about what operation was attempted and where the process encountered a problem. Administrators should review this information and correlate it with relevant events and alerts to identify configuration errors, resource constraints, or infrastructure conditions that may have caused the failure. Destructive actions such as resetting the cluster, deleting storage, or reimaging a host should not be performed without evidence. A structured troubleshooting process begins with the operational information generated by the failed task and then narrows the investigation accordingly.