View Full Netapp NS0-005 Exam Dumps and Practice Test Dumps

 

Question 81.

An administrator wants to identify whether an ONTAP node has a hardware or configuration issue before performing maintenance. Which action is most appropriate?

1. Review system health and active alerts.
   2. Delete unused volumes immediately.
   3. Disable AutoSupport.
   4. Remove all data LIFs.

Correct Answer: 1

Explanation:

Reviewing system health and active alerts provides important information about hardware, configuration, and operational conditions before maintenance begins. Administrators should establish that the environment is healthy and investigate significant alerts before introducing another change. This reduces the chance of performing maintenance while an unrelated problem already exists. Deleting volumes, disabling AutoSupport, or removing data LIFs does not provide a useful health assessment and could introduce additional risk. Pre-maintenance validation should focus on health, alerts, redundancy, and the intended maintenance procedure.

Question 82.

Which ONTAP capability allows a data LIF to be moved between suitable network ports for availability or maintenance purposes?

1. SnapRestore
   2. LIF migration
   3. FlexClone
   4. RAID reconstruction

Correct Answer: 2

Explanation:

LIF migration allows an appropriate logical network interface to move between suitable network ports within the supported configuration. This capability can help maintain connectivity during certain maintenance or availability scenarios without requiring clients to use a completely different logical IP endpoint. SnapRestore performs data restoration, FlexClone creates writable space-efficient copies, and RAID reconstruction relates to storage resiliency after disk-related events. LIF mobility is an important concept in ONTAP networking because logical data access can be separated from a specific physical port.

Question 83.

An administrator needs to check whether a network port belongs to the appropriate Layer 2 network before placing a LIF on it. Which ONTAP object is relevant?

1. Snapshot policy
   2. Igroup
   3. Broadcast domain
   4. LUN map

Correct Answer: 3

Explanation:

A broadcast domain groups network ports that have Layer 2 reachability to the same network. This helps ONTAP understand which ports are appropriate for hosting or migrating compatible LIFs. Correct broadcast-domain configuration is therefore important for reliable network connectivity. Snapshot policies manage point-in-time protection, igroups contain SAN initiators, and LUN mappings control SAN presentation. When investigating whether a network port belongs to the correct network for a LIF, the broadcast domain is the relevant ONTAP networking object.

Question 84.

Which protocol provides block-level storage connectivity over a Fibre Channel fabric?

1. SMB
   2. NFS
   3. iSCSI
   4. FCP

Correct Answer: 4

Explanation:

FCP provides block-level storage access over Fibre Channel infrastructure. ONTAP can present LUNs to Fibre Channel hosts after the required target interfaces, host initiators, igroups, LUN mappings, and SAN zoning are configured correctly. SMB and NFS provide file-level storage services, while iSCSI provides block storage over IP rather than a Fibre Channel fabric. FCP is therefore the appropriate protocol when the storage architecture uses Fibre Channel connectivity to provide SAN block devices to hosts.

Question 85.

What should an administrator verify before deleting an ONTAP volume?

1. Whether the data, dependencies, protection relationships, and retention requirements have been addressed.
   2. Whether every cluster LIF uses the same IP address.
   3. Whether all hosts use NFS.
   4. Whether AutoSupport has been permanently disabled.

Correct Answer: 1

Explanation:

Deleting a volume can remove important data, so administrators should first confirm that the data is no longer required and that application dependencies, protection relationships, recovery requirements, and retention obligations have been considered. Any necessary backup or migration should be completed before destructive action is taken. LIFs should not all share one IP address, and the protocols used by unrelated hosts do not determine whether deletion is safe. AutoSupport also does not need to be disabled before deleting a volume.

Question 86.

Which ONTAP construct provides physical storage capacity from which supported logical storage resources can be provisioned?

1. Export policy
   2. Aggregate
   3. Igroup
   4. SMB share

Correct Answer: 2

Explanation:

An aggregate is an ONTAP storage construct built from physical storage resources and provides capacity from which logical storage resources can be provisioned. Volumes consume capacity from the underlying storage architecture while presenting logical data containers to administrators and clients. Export policies control NFS access, igroups organize SAN initiators, and SMB shares expose file resources to clients. Understanding the relationship between physical storage, aggregates, and logical volumes is important for capacity planning and ONTAP storage administration.

Question 87.

A network interface is reachable, but an NFS client still cannot mount a volume because access is denied. What should be checked next?

1. RAID parity configuration
   2. FC zoning
   3. Export policy rules
   4. LUN serial number

Correct Answer: 3

Explanation:

If basic network connectivity is working but the NFS client receives an access-denied response, the export policy and its applicable rules should be checked. The rules determine which clients are allowed to access the exported resource and what level of access is permitted. RAID parity does not control NFS authorization, Fibre Channel zoning applies to FC SAN connectivity, and a LUN serial number relates to block-storage resources. Troubleshooting should focus on the configuration layer directly associated with the observed NFS access failure.

Question 88.

Which ONTAP technology can be used to create a destination copy for disaster-recovery purposes?

1. RAID-DP
   2. FlexClone
   3. AutoSupport
   4. SnapMirror

Correct Answer: 4

Explanation:

SnapMirror provides replication capabilities that can maintain a protected destination copy of data on another supported storage system. This makes it suitable for disaster-recovery and secondary data-protection designs. Administrators should configure relationships according to recovery objectives, connectivity, capacity, and supported architecture requirements. RAID-DP protects against disk failures within storage, FlexClone provides space-efficient writable copies, and AutoSupport provides diagnostic information. SnapMirror is therefore the relevant technology when data needs to be replicated to a separate recovery destination.

Question 89.

Which ONTAP command-line environment is commonly used by administrators to perform storage management tasks directly?

1. ONTAP CLI
   2. Windows Registry Editor
   3. Linux GRUB only
   4. Fibre Channel switch BIOS

Correct Answer: 1

Explanation:

The ONTAP command-line interface provides administrators with direct access to supported storage management and troubleshooting commands. It can be used to inspect configuration, monitor resources, and perform administrative operations according to assigned permissions. Graphical management tools can also provide many management functions, but the ONTAP CLI remains an important administrative interface. Windows Registry Editor, Linux GRUB, and Fibre Channel switch firmware interfaces manage other systems and are not the primary ONTAP storage command-line environment.

Question 90.

An administrator wants a graphical interface for routine ONTAP cluster administration. Which tool is appropriate?

1. SnapMirror
   2. ONTAP System Manager
   3. RAID-DP
   4. FlexClone

Correct Answer: 2

Explanation:

ONTAP System Manager provides a graphical management interface for many routine ONTAP administrative operations. Administrators can use it to work with storage, networking, data protection, hosts, protocols, and other supported cluster functions. SnapMirror is a replication technology, RAID-DP provides disk resiliency, and FlexClone provides cloning functionality. These are storage features rather than general graphical administration interfaces. System Manager is therefore appropriate when administrators want to perform supported ONTAP management tasks through a graphical interface instead of relying exclusively on the CLI.

Question 91.

A SAN host has multiple paths to its ONTAP LUN. What is a primary benefit of multipathing?

1. It converts block storage into an SMB share.
   2. It eliminates the need for LUN mapping.
   3. It can provide path redundancy and support continued storage access if a path fails.
   4. It automatically creates Snapshot copies.

Correct Answer: 3

Explanation:

Multipathing provides multiple storage paths between a host and its block-storage target. When properly configured, this can improve availability because the host may continue accessing storage through another available path if one path becomes unavailable. Depending on the environment, multipathing can also help distribute I/O across supported paths. It does not convert SAN storage into SMB, remove the need for appropriate LUN presentation, or create Snapshot copies. Host multipathing is therefore an important availability component in SAN architecture.

Question 92.

Which component should an administrator examine when a host can see an iSCSI target but cannot access the expected LUN?

1. NFS export rule
   2. SMB share ACL only
   3. Snapshot schedule
   4. Igroup and LUN mapping

Correct Answer: 4

Explanation:

If the host can communicate with the iSCSI target but the expected LUN is unavailable, the administrator should verify the host’s initiator membership in the correct igroup and ensure that the LUN is mapped appropriately. This determines whether the storage is presented to the intended SAN initiator. NFS export rules and SMB permissions apply to NAS protocols, while Snapshot schedules govern data-protection timing. SAN troubleshooting should follow the access path from connectivity through initiator configuration and LUN presentation.

Question 93.

What is the primary purpose of ONTAP efficiency technologies such as deduplication and compression?

1. Reduce physical storage consumption where applicable.
   2. Replace all data-protection mechanisms.
   3. Configure Fibre Channel zoning.
   4. Assign IP addresses to clients.

Correct Answer: 1

Explanation:

Storage efficiency technologies such as deduplication and compression are designed to reduce the physical capacity required to store data when workloads and configurations allow savings. Deduplication can reduce redundant data storage, while compression can reduce the amount of space required for compressible data. Actual savings vary according to workload characteristics. These technologies do not replace backup, Snapshot, replication, or RAID protection, nor do they configure networking. Their primary purpose is improving the efficiency with which storage capacity is consumed.

Question 94.

An administrator needs to monitor ONTAP performance over several weeks to determine whether demand is steadily increasing. What should be analyzed?

1. Only the most recent performance sample
   2. Historical performance trends
   3. Physical shelf color
   4. Volume names alphabetically

Correct Answer: 2

Explanation:

Historical performance trends allow administrators to understand how workload demand changes over extended periods. Reviewing several weeks of data can reveal gradual increases, recurring peaks, seasonal patterns, or other behavior that a single current sample cannot show. Relevant metrics should be correlated according to the workload and suspected resource constraint. Physical appearance and alphabetical naming provide no useful performance information. Trend analysis supports both troubleshooting and proactive planning by showing how resource demand develops over time.

Question 95.

Which networking configuration is important when an ONTAP LIF must communicate through a specific IP subnet?

1. Snapshot retention
   2. RAID group size
   3. IPspace and broadcast-domain/network configuration as appropriate
   4. LUN serial number only

Correct Answer: 3

Explanation:

ONTAP networking requires logical interfaces and ports to be associated with the appropriate network configuration. Concepts such as IPspaces, broadcast domains, and subnets help organize connectivity and determine where LIFs can operate according to the environment. Snapshot retention and RAID configuration address storage protection, while LUN serial numbers identify block-storage objects. When troubleshooting or planning IP connectivity, administrators should verify the logical network configuration, addresses, routing, and associated ports rather than focusing on unrelated storage settings.

Question 96.

A disk fails in a RAID-DP protected RAID group. What is the purpose of the RAID protection during this event?

1. Automatically convert all LUNs to NFS.
   2. Disable client access permanently.
   3. Remove all Snapshot copies.
   4. Maintain data availability and resiliency within supported failure limits.

Correct Answer: 4

Explanation:

RAID-DP provides double-parity protection designed to preserve data resiliency during supported disk-failure scenarios. When a disk fails, RAID protection enables the system to continue reconstructing or serving protected data according to the supported architecture while the failed component is addressed. RAID does not convert storage protocols, intentionally disable clients, or remove Snapshot copies. Administrators should still monitor failed-disk conditions and follow the appropriate replacement or recovery procedure because RAID protection is intended to provide resiliency, not eliminate maintenance requirements.

Question 97.

An administrator wants to verify that a SnapMirror destination is sufficiently current for recovery requirements. What should be reviewed?

1. Relationship status and replication/update information
   2. SMB share display name only
   3. Number of administrator accounts
   4. Physical rack location only

Correct Answer: 1

Explanation:

The SnapMirror relationship status and relevant replication information help administrators determine whether the destination is being updated as expected. This information should be evaluated against the organization’s recovery requirements and the intended replication schedule or policy. A relationship that is healthy but not sufficiently current may still fail to meet a required recovery objective. SMB naming, administrator counts, and rack location do not establish replication currency. Protection should therefore be validated using the status and timing information associated with the replication relationship.

Question 98.

Which concept describes the maximum acceptable amount of data loss measured in time for a recovery strategy?

1. MTU
   2. Recovery Point Objective (RPO)
   3. DNS TTL
   4. RAID group size

Correct Answer: 2

Explanation:

Recovery Point Objective, or RPO, describes the maximum acceptable amount of data loss expressed as a period of time. For example, an RPO can influence how frequently data should be replicated or protected. It differs from a Recovery Time Objective, which concerns how quickly service should be restored after an interruption. MTU relates to network frame sizing, DNS TTL affects name-resolution caching, and RAID group size concerns storage layout. Understanding RPO helps administrators align data-protection frequency with business recovery requirements.

Question 99.

A client cannot connect to an ONTAP data LIF after a network change. What should the administrator investigate first?

1. Snapshot retention counts
   2. FlexClone relationships
   3. LIF status, port placement, IP configuration, and network reachability
   4. RAID parity initialization only

Correct Answer: 3

Explanation:

Because the connectivity problem began after a network change, the administrator should first examine the components directly involved in network access. This includes the LIF’s operational status, current port, IP configuration, routing or subnet information, and general reachability. Related network events may also provide useful context. Snapshot retention, FlexClone relationships, and RAID parity are unrelated to basic IP connectivity. Troubleshooting should begin with the most likely affected layer and then expand to other components if those initial checks do not identify the cause.

Question 100.

An administrator receives several new ONTAP alerts after completing maintenance. What is the most appropriate next action?

1. Delete all affected volumes.
   2. Disable alert generation.
   3. Immediately reboot the cluster again.
   4. Review and prioritize the alerts by severity, affected resources, and relationship to the maintenance.

Correct Answer: 4

Explanation:

After maintenance, new alerts should be reviewed systematically to determine their severity, affected resources, and whether they are directly related to the completed work. Some conditions may be transient, while others may require corrective action. Related events, health information, and configuration status can help establish the cause. Deleting volumes, disabling monitoring, or performing another broad reboot without evidence could create unnecessary disruption. Post-maintenance validation should focus on confirming normal system health and resolving any meaningful conditions identified by monitoring.