View Full Nutanix NCA Exam Dumps and Practice Test Dumps

 

Question 341.

An administrator needs to create several VMs with similar virtual hardware and disk configurations. A correctly configured source VM already exists. Which operation can simplify the process?

1. Clone the source VM.
   2. Run NCC on each new VM.
   3. Reimage the nodes with Foundation.
   4. Perform an LCM inventory.

Correct Answer: 1

Explanation:

Cloning the source VM provides an efficient starting point when multiple virtual machines require similar configurations. Instead of manually rebuilding the virtual hardware and disk configuration for every workload, the administrator can create clones and then customize each one as required. This reduces repetitive provisioning work and promotes configuration consistency. NCC is primarily used for cluster health validation, Foundation handles initial node imaging and deployment, and LCM supports infrastructure lifecycle management. These tools do not provide the primary VM duplication functionality required in this scenario.

Question 342.

An administrator needs to install an operating system on a newly created VM. The installation files are provided as an ISO. What should be done?

1. Attach the ISO to a Controller VM.
   2. Make the ISO available and attach it to the target VM as installation media.
   3. Run Foundation against the VM.
   4. Convert the ISO into an NCC health check.

Correct Answer: 2

Explanation:

An ISO containing operating system installation files can be made available to the Nutanix environment and attached to the target VM as virtual installation media. The VM can then be configured to boot from that media so the operating system installation can begin. The ISO should not be attached to a Controller VM for this purpose. Foundation is intended for infrastructure deployment and node imaging, while NCC performs health checks. Using an ISO as attached VM media is the appropriate workflow for this type of guest installation.

Question 343.

A newly created VM has no guest network connectivity yet. Which feature allows the administrator to interact directly with the operating system installation?

1. LCM
   2. Nutanix Move
   3. VM console
   4. NCC

Correct Answer: 3

Explanation:

The VM console provides direct interactive access to the virtual machine without requiring the guest operating system to have working network connectivity. This makes it useful for operating system installation, boot troubleshooting, and initial guest network configuration. LCM manages supported software and firmware lifecycle operations, Nutanix Move assists with workload migration, and NCC performs cluster health and configuration checks. The VM console is therefore the most appropriate feature when an administrator needs to interact directly with a guest before normal network-based remote administration is available.

Question 344.

An administrator initiates a virtual disk expansion and wants to confirm that the Nutanix management operation completed. What should be checked?

1. Hardware warranty status
   2. Rack position
   3. Shipping records
   4. Task status in Prism

Correct Answer: 4

Explanation:

Prism task information provides visibility into management operations such as virtual disk changes, VM creation, and other configuration activities. The administrator can review the relevant task to determine whether the operation completed successfully or encountered an error. Afterward, the resulting VM configuration should also be verified. Warranty status, rack position, and shipping records provide static infrastructure information rather than the runtime status of an administrative operation. Checking tasks is an important validation step after making infrastructure or workload changes.

Question 345.

Which capability is most appropriate for quickly creating a development VM based on an existing configured VM?

1. VM cloning
   2. Life Cycle Manager
   3. Foundation
   4. NCC

Correct Answer: 1

Explanation:

VM cloning is useful when a new development or test VM should begin with a configuration similar to an existing virtual machine. The administrator can clone the source workload and then make any required changes to the resulting VM. This can save time compared with manually recreating its virtual hardware and storage configuration. LCM is intended for infrastructure lifecycle management, Foundation handles initial node deployment and imaging, and NCC performs cluster health checks. Cloning is therefore the capability directly associated with creating a duplicate workload starting point.

Question 346.

An administrator is provisioning a VM for an application that requires 4 vCPUs and 8 GB of memory. What should the administrator verify before assigning these resources?

1. The physical rack color
   2. That the cluster has sufficient available resources for the requested configuration
   3. The shipping date of the node
   4. That every other VM has the same configuration

Correct Answer: 2

Explanation:

Before provisioning a VM, the administrator should compare the application’s resource requirements with available cluster capacity. The requested CPU and memory should be assigned when they are appropriate for the workload and can be supported by the infrastructure. There is no requirement for every VM to have identical resource allocations because workloads have different requirements. Rack color and node shipping dates are irrelevant to VM sizing. Proper provisioning balances application needs with efficient use of shared compute resources and available cluster capacity.

Question 347.

Which metric represents the number of storage input/output operations performed per second?

1. CPU utilization
   2. Memory usage
   3. IOPS
   4. Network address

Correct Answer: 3

Explanation:

IOPS stands for input/output operations per second and represents the rate of storage I/O operations. It is commonly analyzed when investigating workload storage behavior. Administrators should evaluate IOPS alongside latency and other relevant performance measurements because a high number of operations is not necessarily problematic if the storage system is responding appropriately. CPU utilization measures processor activity, memory usage measures memory consumption, and a network address identifies network communication endpoints. IOPS is therefore the metric specifically associated with storage operation rate.

Question 348.

A VM must temporarily boot from recovery media attached as an ISO. What should the administrator configure?

1. The physical host boot order
   2. The Controller VM storage configuration
   3. The cluster replication factor
   4. The VM boot configuration so the attached media can be used.

Correct Answer: 4

Explanation:

The VM boot configuration should allow the workload to start from the attached recovery media. The administrator should confirm that the ISO is available, properly attached to the VM, and selected appropriately in the VM’s boot process. This is a workload-level configuration and does not require changing the physical host boot order, Controller VM storage, or cluster replication settings. After the recovery activity is completed, the VM can be returned to its normal boot configuration according to operational requirements.

Question 349.

A VM is powered on, but an administrator cannot reach it through the network. Which feature can still provide direct access to its screen?

1. VM console
   2. LCM
   3. Foundation
   4. Storage container

Correct Answer: 1

Explanation:

The VM console can provide direct interactive access to the guest display even when network connectivity to the virtual machine is unavailable. This allows the administrator to inspect boot status, sign in locally when appropriate, and troubleshoot guest networking or operating system problems. LCM manages supported infrastructure lifecycle operations, Foundation handles initial deployment, and storage containers provide logical storage resources. None of those capabilities serves as the direct interactive interface to a running VM. The console is therefore valuable during network-related troubleshooting.

Question 350.

A VM is connected to the wrong logical network. Which configuration should the administrator change?

1. Storage container assignment
   2. Virtual network interface assignment
   3. LCM inventory configuration
   4. NCC health-check configuration

Correct Answer: 2

Explanation:

The VM’s virtual network interface determines which logical network or subnet the workload uses. If the interface is connected to the wrong network, the administrator should assign it to the correct virtual network according to the workload’s connectivity requirements. Storage containers provide storage rather than network connectivity, LCM is associated with lifecycle operations, and NCC performs health checks. After correcting the network assignment, the administrator should verify connectivity and investigate guest network settings if communication problems remain.

Question 351.

An application is experiencing slow storage response even though its IOPS level is normal for that workload. Which metric should be examined closely?

1. VM display name
   2. Rack position
   3. Storage latency
   4. Node purchase date

Correct Answer: 3

Explanation:

Storage latency is especially relevant when users report slow storage response because it reflects the time associated with completing I/O operations. A workload may generate a normal number of IOPS while still experiencing increased response times. Administrators should compare current latency with historical values and correlate it with other workload and infrastructure metrics. VM names, rack positions, and purchase dates do not measure storage performance. Evaluating both IOPS and latency provides a more complete understanding of storage behavior than relying on operation volume alone.

Question 352.

A VM has reached the end of its useful life and is scheduled for deletion. What should be confirmed before the administrator proceeds?

1. That its name contains no spaces
   2. That the host is running the newest firmware
   3. That Prism Central has no other VMs
   4. That required workload data, dependencies, and recovery needs have been addressed.

Correct Answer: 4

Explanation:

Before permanently deleting a VM, the administrator should confirm that the workload is no longer required and that any important data, application dependencies, retention requirements, or recovery needs have been addressed. Deletion can be destructive, so the consequences should be understood before the operation begins. VM naming conventions, host firmware age, or the presence of other VMs in Prism Central do not determine whether deletion is safe. Careful verification reduces the risk of accidentally removing a workload or data that is still required.

Question 353.

Why would an administrator add another virtual disk to a VM?

1. To provide additional storage for the workload
   2. To increase the number of vCPUs
   3. To change the physical node location
   4. To upgrade Prism Central

Correct Answer: 1

Explanation:

Adding another virtual disk provides additional storage that can be used by the guest operating system or applications. For example, an administrator might add a disk for database files, application data, logs, or increased general storage capacity. The administrator should confirm workload requirements and available cluster capacity before provisioning it. A virtual disk does not increase CPU resources, move the physical node, or upgrade Prism Central. Compute, storage, networking, and management components are separate resource areas and should be modified according to the actual workload requirement.

Question 354.

A newly deployed VM has a virtual NIC but cannot access its required application network. What should be verified first?

1. Cluster firmware inventory
   2. The virtual NIC’s assigned network or subnet
   3. Storage replication status
   4. Foundation version

Correct Answer: 2

Explanation:

The administrator should first verify that the VM’s virtual NIC is connected to the correct virtual network or subnet. This is the configuration most directly related to the reported connectivity problem. If the assignment is correct, guest network settings and other infrastructure networking components can then be investigated. Cluster firmware inventory, storage replication, and Foundation versions serve different purposes and do not directly determine the logical network used by the VM. Troubleshooting should begin with the configuration most closely associated with the symptom.

Question 355.

An administrator wants to understand both the volume and response time of a VM’s storage activity. Which metrics should be reviewed together?

1. CPU and memory only
   2. Rack units and node count
   3. IOPS and storage latency
   4. VM name and IP address

Correct Answer: 3

Explanation:

IOPS and storage latency provide complementary information about storage behavior. IOPS indicates the number of storage operations occurring per second, while latency indicates how long those operations are taking to complete. Reviewing both metrics helps administrators determine whether increased storage activity is associated with slower response times. Other relevant measurements can also be included for a broader analysis. CPU, memory, rack dimensions, names, and IP addresses do not provide the same combination of storage operation volume and response-time information.

Question 356.

An administrator changes a VM from 2 vCPUs to 4 vCPUs. What should be done after the configuration task completes?

1. Reimage the cluster.
   2. Delete the VM’s virtual disks.
   3. Remove the VM network interface.
   4. Verify that the task succeeded and the VM now has the intended CPU configuration.

Correct Answer: 4

Explanation:

After changing VM resources, the administrator should verify that the task completed successfully and confirm that the VM reflects the intended configuration. This provides assurance that the requested change was actually applied and allows any failure to be identified immediately. Reimaging the cluster, deleting storage, or removing networking would be unrelated and potentially disruptive. Verification is an important part of change management because initiating a task does not by itself guarantee that the final workload configuration matches the administrator’s intended state.

Question 357.

What is the general purpose of a VM recovery point or snapshot?

1. Provide a point-in-time state that can be used in appropriate recovery scenarios.
   2. Replace the cluster’s physical network.
   3. Increase the number of physical nodes.
   4. Perform firmware upgrades.

Correct Answer: 1

Explanation:

A recovery point or snapshot can preserve workload data or state associated with a particular point in time and support appropriate recovery workflows. This can be useful when recovering from certain configuration mistakes, data changes, or operational incidents. Administrators should understand how the specific protection mechanism fits into the organization’s broader backup, retention, and disaster-recovery strategy. Recovery points do not replace networking, add physical nodes, or perform firmware upgrades. Their primary value is providing a usable earlier workload state for supported recovery operations.

Question 358.

A VM consistently uses only a small portion of its allocated CPU and memory. What should an administrator consider before reducing its resources?

1. Only the VM’s display name
   2. Historical utilization, workload requirements, and expected demand
   3. The physical rack color
   4. The node shipping weight

Correct Answer: 2

Explanation:

Before reducing VM resources, the administrator should review historical utilization and understand the workload’s normal and peak requirements. Low current utilization alone may not justify downsizing if the workload experiences periodic demand spikes or has specific application requirements. Historical data provides a more representative view of resource usage over time. Rack color, shipping weight, and VM naming provide no meaningful sizing information. Rightsizing should balance efficient resource use with sufficient capacity for normal workload behavior and expected future demand.

Question 359.

A production VM shows a sudden increase in storage latency. Which troubleshooting approach is most appropriate?

1. Immediately delete the VM.
   2. Reimage all nodes.
   3. Correlate latency with IOPS, historical metrics, events, alerts, and workload activity.
   4. Change the cluster name.

Correct Answer: 3

Explanation:

A sudden latency increase should be investigated in context rather than treated as proof of a specific failure. The administrator should correlate latency with IOPS, historical performance, workload activity, alerts, and events to determine what changed around the affected period. This can help distinguish expected workload behavior from a genuine infrastructure or application problem. Deleting the VM or reimaging nodes would be highly disruptive without supporting evidence, while changing the cluster name has no performance effect. Effective troubleshooting depends on correlating relevant operational data.

Question 360.

A VM configuration task reports a failure. What should the administrator review before attempting another change?

1. Hardware packaging
   2. Rack dimensions
   3. Shipping documentation
   4. The failed task details along with relevant events and alerts

Correct Answer: 4

Explanation:

The failed task details should be reviewed first because they may identify the operation that failed and provide information about the cause. Related events and alerts can add context about resource constraints, configuration problems, or infrastructure conditions occurring at the same time. This evidence should guide the next troubleshooting action. Hardware packaging, rack dimensions, and shipping documentation do not provide useful runtime information about a failed VM operation. Administrators should understand the failure before retrying or introducing additional configuration changes.