Pass Fortinet NSE5_SSE_AD-7.6 Exam in First Attempt Easily
Real Fortinet NSE5_SSE_AD-7.6 Exam Questions, Accurate & Verified Answers As Experienced in the Actual Test!

Verified by experts

NSE5_SSE_AD-7.6 Premium File

  • 54 Questions & Answers
  • Last Update: Nov 5, 2026
$69.99 $76.99

Fortinet NSE 5 - FortiSASE and SD-WAN 7.6 Core Administrator NSE5_SSE_AD-7.6 Practice Test 23

Question 220

An incident team needs to isolate the root cause. An SD-WAN branch has two healthy ISPs but only one eligible default route, so routing never considers the backup in selection. Which investigation should be prioritized?

  1. Inspect longest-prefix route, tunnel status, BGP/static prefix and packet trace.
  2. Inspect IPv6 route table, neighbor discovery, zone policy and session path.
  3. Inspect local-out source, routing table, DNS resolution and carrier gateway.
  4. Inspect route distance, SD-WAN member gateway, ECMP eligibility and route table.

Explanation

Correct Answer

D:

Inspect route distance, SD-WAN member gateway, ECMP eligibility and route table. This inspection targets ECMP route availability for two carriers rather than a different configuration issue. The corrective action is: Correct the route model and associated member gateways so both intended underlay paths are available for SD-WAN evaluation. Expected evidence: Route diagnostics show usable candidate paths and tested failover reaches the backup carrier.

Incorrect Answers

A:

Inspect longest-prefix route, tunnel status, BGP/static prefix and packet trace. This is useful when diagnosing Private route leak to internet default. Instead, inspect route distance, sd-wan member gateway, ecmp eligibility and route table.

B:

Inspect IPv6 route table, neighbor discovery, zone policy and session path. This is useful when diagnosing SD-WAN IPv6 route eligibility. Instead, inspect route distance, sd-wan member gateway, ecmp eligibility and route table.

C:

Inspect local-out source, routing table, DNS resolution and carrier gateway. This is useful when diagnosing Zero-route after management network change. Instead, inspect route distance, sd-wan member gateway, ecmp eligibility and route table.

Question 221

A network engineer faces the following FortiSASE or SD-WAN condition. A specific policy route sends payroll traffic through an obsolete WAN even after administrators build a new SD-WAN rule for it. What should the engineer do?

  1. Restore valid default gateway or management local-out routing and verify reachability before expanding policies.
  2. Create controlled new flows and inspect session reevaluation behavior before labeling the route change ineffective.
  3. Restore or validate an appropriate private route via the authorized overlay zone before relying on internet fallback.
  4. Reconcile the FortiOS policy-route and SD-WAN route processing order so the authorized path selection is unambiguous.

Explanation

Correct Answer

D:

Reconcile the FortiOS policy-route and SD-WAN route processing order so the authorized path selection is unambiguous. Policy-based routing can alter forwarding decisions before or alongside SD-WAN selection depending on configured route types. Expected evidence: New payroll flows follow the intended member and no longer match the obsolete policy route. Key limit: Deleting unrelated policy routes can affect other workloads and requires targeted impact review.

Incorrect Answers

A:

Restore valid default gateway or management local-out routing and verify reachability before expanding policies. This could apply to the separate issue Zero-route after management network change: A remote FortiGate loses external connectivity after management-network renumbering, and the team creates a permissive firewall rule without checking routing. For SD-WAN policy route precedence, the directly relevant action is: Reconcile the FortiOS policy-route and SD-WAN route processing order so the authorized path selection is unambiguous.

B:

Create controlled new flows and inspect session reevaluation behavior before labeling the route change ineffective. This could apply to the separate issue Traffic not following new static route: An administrator fixes a default route and expects an established video call to move immediately, but the session continues on its original member. For SD-WAN policy route precedence, the directly relevant action is: Reconcile the FortiOS policy-route and SD-WAN route processing order so the authorized path selection is unambiguous.

C:

Restore or validate an appropriate private route via the authorized overlay zone before relying on internet fallback. This could apply to the separate issue Private route leak to internet default: A remote office sends traffic for a private datacenter prefix toward internet default because the overlay route was accidentally withdrawn. For SD-WAN policy route precedence, the directly relevant action is: Reconcile the FortiOS policy-route and SD-WAN route processing order so the authorized path selection is unambiguous.

Question 222

A pilot is validating the implementation. A specific policy route sends payroll traffic through an obsolete WAN even after administrators build a new SD-WAN rule for it. Which finding proves that the intended fix works?

  1. Fresh sessions on the backup have correct translated identity and complete return-path handshakes.
  2. Management service packets resolve the intended next hop and reach their cloud management endpoint.
  3. Destination lookup selects the intended private tunnel and no private data is emitted on public underlays.
  4. New payroll flows follow the intended member and no longer match the obsolete policy route.

Explanation

Correct Answer

D:

New payroll flows follow the intended member and no longer match the obsolete policy route. This is the directly relevant check for SD-WAN policy route precedence. It confirms the required step: Reconcile the FortiOS policy-route and SD-WAN route processing order so the authorized path selection is unambiguous. The operating principle is: Policy-based routing can alter forwarding decisions before or alongside SD-WAN selection depending on configured route types.

Incorrect Answers

A:

Fresh sessions on the backup have correct translated identity and complete return-path handshakes. This would validate a different scenario, Asymmetric SNAT sessions on WAN failover, where After WAN failover, a long-lived outbound TCP session is still bound to a public IP from the failed carrier, causing the peer to reject traffic on the backup. The current case needs evidence for SD-WAN policy route precedence.

B:

Management service packets resolve the intended next hop and reach their cloud management endpoint. This would validate a different scenario, Zero-route after management network change, where A remote FortiGate loses external connectivity after management-network renumbering, and the team creates a permissive firewall rule without checking routing. The current case needs evidence for SD-WAN policy route precedence.

C:

Destination lookup selects the intended private tunnel and no private data is emitted on public underlays. This would validate a different scenario, Private route leak to internet default, where A remote office sends traffic for a private datacenter prefix toward internet default because the overlay route was accidentally withdrawn. The current case needs evidence for SD-WAN policy route precedence.

Question 223

A technical lead asks why the recommended approach works. A specific policy route sends payroll traffic through an obsolete WAN even after administrators build a new SD-WAN rule for it. Which mechanism is most relevant?

  1. Locally originated management traffic requires valid routes independent of ordinary LAN-to-WAN policy rules.
  2. Session records contain forwarding state more specific than aggregate link utilization widgets.
  3. Policy-based routing can alter forwarding decisions before or alongside SD-WAN selection depending on configured route types.
  4. Specific private prefixes should direct private application traffic to the correct overlay next hop.

Explanation

Correct Answer

C:

Policy-based routing can alter forwarding decisions before or alongside SD-WAN selection depending on configured route types. This explains SD-WAN policy route precedence in the given environment. The implementation decision is: Reconcile the FortiOS policy-route and SD-WAN route processing order so the authorized path selection is unambiguous. Confirm it with: New payroll flows follow the intended member and no longer match the obsolete policy route.

Incorrect Answers

A:

Locally originated management traffic requires valid routes independent of ordinary LAN-to-WAN policy rules. That concept concerns Zero-route after management network change, not the mechanism needed for SD-WAN policy route precedence. The relevant principle is: Policy-based routing can alter forwarding decisions before or alongside SD-WAN selection depending on configured route types.

B:

Session records contain forwarding state more specific than aggregate link utilization widgets. That concept concerns Traffic session table identifies selected route, not the mechanism needed for SD-WAN policy route precedence. The relevant principle is: Policy-based routing can alter forwarding decisions before or alongside SD-WAN selection depending on configured route types.

D:

Specific private prefixes should direct private application traffic to the correct overlay next hop. That concept concerns Private route leak to internet default, not the mechanism needed for SD-WAN policy route precedence. The relevant principle is: Policy-based routing can alter forwarding decisions before or alongside SD-WAN selection depending on configured route types.

Question 224

Before changing production settings, an engineer reviews the symptoms. A specific policy route sends payroll traffic through an obsolete WAN even after administrators build a new SD-WAN rule for it. Which evidence is most useful?

  1. Inspect longest-prefix route, tunnel status, BGP/static prefix and packet trace.
  2. Inspect policy route list, destination, source criteria, FIB and selected session path.
  3. Inspect `diagnose sys session list`, SD-WAN service status and relevant traffic logs for the flow.
  4. Inspect local-out source, routing table, DNS resolution and carrier gateway.

Explanation

Correct Answer

B:

Inspect policy route list, destination, source criteria, FIB and selected session path. This inspection targets SD-WAN policy route precedence rather than a different configuration issue. The corrective action is: Reconcile the FortiOS policy-route and SD-WAN route processing order so the authorized path selection is unambiguous. Expected evidence: New payroll flows follow the intended member and no longer match the obsolete policy route.

Incorrect Answers

A:

Inspect longest-prefix route, tunnel status, BGP/static prefix and packet trace. This is useful when diagnosing Private route leak to internet default. Instead, inspect policy route list, destination, source criteria, fib and selected session path.

C:

Inspect `diagnose sys session list`, SD-WAN service status and relevant traffic logs for the flow. This is useful when diagnosing Traffic session table identifies selected route. Instead, inspect policy route list, destination, source criteria, fib and selected session path.

D:

Inspect local-out source, routing table, DNS resolution and carrier gateway. This is useful when diagnosing Zero-route after management network change. Instead, inspect policy route list, destination, source criteria, fib and selected session path.

Question 225

A deployment review finds this gap. A remote office sends traffic for a private datacenter prefix toward internet default because the overlay route was accidentally withdrawn. What is the most targeted next configuration step?

  1. Correct the supported probe or target route so reachability is measured through the intended overlay member.
  2. Restore next-hop reachability or supported route recursion for the overlay before accepting the prefix as usable.
  3. Restore or validate an appropriate private route via the authorized overlay zone before relying on internet fallback.
  4. Reconcile the FortiOS policy-route and SD-WAN route processing order so the authorized path selection is unambiguous.

Explanation

Correct Answer

C:

Restore or validate an appropriate private route via the authorized overlay zone before relying on internet fallback. Specific private prefixes should direct private application traffic to the correct overlay next hop. Expected evidence: Destination lookup selects the intended private tunnel and no private data is emitted on public underlays. Key limit: An internet default route is not a substitute for a functional protected private overlay.

Incorrect Answers

A:

Correct the supported probe or target route so reachability is measured through the intended overlay member. This could apply to the separate issue Overlay probe route conflicts with app data: An SD-WAN health probe for a private tunnel target follows the public default route rather than the tunnel and falsely marks the overlay unavailable. For Private route leak to internet default, the directly relevant action is: Restore or validate an appropriate private route via the authorized overlay zone before relying on internet fallback.

B:

Restore next-hop reachability or supported route recursion for the overlay before accepting the prefix as usable. This could apply to the separate issue BGP route with unreachable recursive next hop: A FortiGate receives a branch prefix via BGP over an overlay, but the selected BGP next hop cannot be resolved to an active tunnel. For Private route leak to internet default, the directly relevant action is: Restore or validate an appropriate private route via the authorized overlay zone before relying on internet fallback.

D:

Reconcile the FortiOS policy-route and SD-WAN route processing order so the authorized path selection is unambiguous. This could apply to the separate issue SD-WAN policy route precedence: A specific policy route sends payroll traffic through an obsolete WAN even after administrators build a new SD-WAN rule for it. For Private route leak to internet default, the directly relevant action is: Restore or validate an appropriate private route via the authorized overlay zone before relying on internet fallback.

Question 226

The recommended change has been applied. A remote office sends traffic for a private datacenter prefix toward internet default because the overlay route was accidentally withdrawn. Which observation best verifies the intended outcome?

  1. Overlay health checks traverse their tunnel path and their status reflects actual private reachability.
  2. Destination lookup selects the intended private tunnel and no private data is emitted on public underlays.
  3. New payroll flows follow the intended member and no longer match the obsolete policy route.
  4. Controlled IPv6 sessions route through the intended healthy member with valid next-hop resolution.

Explanation

Correct Answer

B:

Destination lookup selects the intended private tunnel and no private data is emitted on public underlays. This is the directly relevant check for Private route leak to internet default. It confirms the required step: Restore or validate an appropriate private route via the authorized overlay zone before relying on internet fallback. The operating principle is: Specific private prefixes should direct private application traffic to the correct overlay next hop.

Incorrect Answers

A:

Overlay health checks traverse their tunnel path and their status reflects actual private reachability. This would validate a different scenario, Overlay probe route conflicts with app data, where An SD-WAN health probe for a private tunnel target follows the public default route rather than the tunnel and falsely marks the overlay unavailable. The current case needs evidence for Private route leak to internet default.

C:

New payroll flows follow the intended member and no longer match the obsolete policy route. This would validate a different scenario, SD-WAN policy route precedence, where A specific policy route sends payroll traffic through an obsolete WAN even after administrators build a new SD-WAN rule for it. The current case needs evidence for Private route leak to internet default.

D:

Controlled IPv6 sessions route through the intended healthy member with valid next-hop resolution. This would validate a different scenario, SD-WAN IPv6 route eligibility, where A dual-stack branch has working IPv4 SD-WAN routing but IPv6 web sessions time out because only IPv4 default paths were configured. The current case needs evidence for Private route leak to internet default.

Question 227

An architect reviews the platform behavior behind this incident. A remote office sends traffic for a private datacenter prefix toward internet default because the overlay route was accidentally withdrawn. Which explanation applies?

  1. Specific private prefixes should direct private application traffic to the correct overlay next hop.
  2. BGP prefix receipt and route-to-next-hop resolution are separate requirements for forwarding.
  3. Health probes need a valid forwarding route that represents the member being monitored.
  4. Policy-based routing can alter forwarding decisions before or alongside SD-WAN selection depending on configured route types.

Explanation

Correct Answer

A:

Specific private prefixes should direct private application traffic to the correct overlay next hop. This explains Private route leak to internet default in the given environment. The implementation decision is: Restore or validate an appropriate private route via the authorized overlay zone before relying on internet fallback. Confirm it with: Destination lookup selects the intended private tunnel and no private data is emitted on public underlays.

Incorrect Answers

B:

BGP prefix receipt and route-to-next-hop resolution are separate requirements for forwarding. That concept concerns BGP route with unreachable recursive next hop, not the mechanism needed for Private route leak to internet default. The relevant principle is: Specific private prefixes should direct private application traffic to the correct overlay next hop.

C:

Health probes need a valid forwarding route that represents the member being monitored. That concept concerns Overlay probe route conflicts with app data, not the mechanism needed for Private route leak to internet default. The relevant principle is: Specific private prefixes should direct private application traffic to the correct overlay next hop.

D:

Policy-based routing can alter forwarding decisions before or alongside SD-WAN selection depending on configured route types. That concept concerns SD-WAN policy route precedence, not the mechanism needed for Private route leak to internet default. The relevant principle is: Specific private prefixes should direct private application traffic to the correct overlay next hop.

Question 228

A support analyst is collecting data for this scenario. A remote office sends traffic for a private datacenter prefix toward internet default because the overlay route was accidentally withdrawn. Which diagnostic check is most targeted?

  1. Inspect session flags, route change, service counters and new-session selection.
  2. Inspect BGP RIB, resolved next-hop path, tunnel route and forwarding table.
  3. Inspect longest-prefix route, tunnel status, BGP/static prefix and packet trace.
  4. Inspect policy route list, destination, source criteria, FIB and selected session path.

Explanation

Correct Answer

C:

Inspect longest-prefix route, tunnel status, BGP/static prefix and packet trace. This inspection targets Private route leak to internet default rather than a different configuration issue. The corrective action is: Restore or validate an appropriate private route via the authorized overlay zone before relying on internet fallback. Expected evidence: Destination lookup selects the intended private tunnel and no private data is emitted on public underlays.

Incorrect Answers

A:

Inspect session flags, route change, service counters and new-session selection. This is useful when diagnosing Traffic not following new static route. Instead, inspect longest-prefix route, tunnel status, bgp/static prefix and packet trace.

B:

Inspect BGP RIB, resolved next-hop path, tunnel route and forwarding table. This is useful when diagnosing BGP route with unreachable recursive next hop. Instead, inspect longest-prefix route, tunnel status, bgp/static prefix and packet trace.

D:

Inspect policy route list, destination, source criteria, FIB and selected session path. This is useful when diagnosing SD-WAN policy route precedence. Instead, inspect longest-prefix route, tunnel status, bgp/static prefix and packet trace.

Question 229

A Fortinet administrator must address this operational problem. A primary ISP fails and a secondary has a usable next hop, but the routing table retains a stale preferred route to the dead member. Which response best resolves it?

  1. Review route status and health-check withdrawal behavior so a failed route no longer wins forwarding.
  2. Restore next-hop reachability or supported route recursion for the overlay before accepting the prefix as usable.
  3. Correct the route model and associated member gateways so both intended underlay paths are available for SD-WAN evaluation.
  4. Update and validate the member gateway and underlying route to the current ISP next hop.

Explanation

Correct Answer

A:

Review route status and health-check withdrawal behavior so a failed route no longer wins forwarding. Dynamic route eligibility and SD-WAN member health cooperate to prevent forwarding into failed links. Expected evidence: A controlled primary fault withdraws unusable routes and new sessions reach the backup ISP. Key limit: Removing routes globally to fix one member can disrupt noninternet destinations.

Incorrect Answers

B:

Restore next-hop reachability or supported route recursion for the overlay before accepting the prefix as usable. This could apply to the separate issue BGP route with unreachable recursive next hop: A FortiGate receives a branch prefix via BGP over an overlay, but the selected BGP next hop cannot be resolved to an active tunnel. For Route priority during primary circuit loss, the directly relevant action is: Review route status and health-check withdrawal behavior so a failed route no longer wins forwarding.

C:

Correct the route model and associated member gateways so both intended underlay paths are available for SD-WAN evaluation. This could apply to the separate issue ECMP route availability for two carriers: An SD-WAN branch has two healthy ISPs but only one eligible default route, so routing never considers the backup in selection. For Route priority during primary circuit loss, the directly relevant action is: Review route status and health-check withdrawal behavior so a failed route no longer wins forwarding.

D:

Update and validate the member gateway and underlying route to the current ISP next hop. This could apply to the separate issue Per-member gateway resolution: An ISP changes the upstream router address on a static-address WAN, but the SD-WAN member retains the old gateway and reports intermittent traffic loss. For Route priority during primary circuit loss, the directly relevant action is: Review route status and health-check withdrawal behavior so a failed route no longer wins forwarding.

Question 230

For this situation, a reviewer needs acceptance evidence. A primary ISP fails and a secondary has a usable next hop, but the routing table retains a stale preferred route to the dead member. Which result most directly demonstrates success?

  1. ARP or neighbor discovery resolves the correct gateway and new traffic uses the member successfully.
  2. Management service packets resolve the intended next hop and reach their cloud management endpoint.
  3. A controlled primary fault withdraws unusable routes and new sessions reach the backup ISP.
  4. The actual source/destination session shows which service and outbound interface the firewall selected.

Explanation

Correct Answer

C:

A controlled primary fault withdraws unusable routes and new sessions reach the backup ISP. This is the directly relevant check for Route priority during primary circuit loss. It confirms the required step: Review route status and health-check withdrawal behavior so a failed route no longer wins forwarding. The operating principle is: Dynamic route eligibility and SD-WAN member health cooperate to prevent forwarding into failed links.

Incorrect Answers

A:

ARP or neighbor discovery resolves the correct gateway and new traffic uses the member successfully. This would validate a different scenario, Per-member gateway resolution, where An ISP changes the upstream router address on a static-address WAN, but the SD-WAN member retains the old gateway and reports intermittent traffic loss. The current case needs evidence for Route priority during primary circuit loss.

B:

Management service packets resolve the intended next hop and reach their cloud management endpoint. This would validate a different scenario, Zero-route after management network change, where A remote FortiGate loses external connectivity after management-network renumbering, and the team creates a permissive firewall rule without checking routing. The current case needs evidence for Route priority during primary circuit loss.

D:

The actual source/destination session shows which service and outbound interface the firewall selected. This would validate a different scenario, Traffic session table identifies selected route, where An operator claims SD-WAN selected the wrong link based only on aggregate interface bandwidth, but a particular application's active session is not inspected. The current case needs evidence for Route priority during primary circuit loss.

Fortinet NSE 5 - FortiSASE and SD-WAN 7.6 Core Administrator (NSE5_SSE_AD-7.6) Practice Tests

SPECIAL OFFER: GET 10% OFF
This is ONE TIME OFFER

You save
10%

Enter Your Email Address to Receive Your 10% Off Discount Code

SPECIAL OFFER: GET 10% OFF

You save
10%

Use Discount Code:

A confirmation link was sent to your e-mail.

Please check your mailbox for a message from support@examlabs.com and follow the directions.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your email address below to get started with our interactive software demo of your free trial.

  • Realistic exam simulation and exam editor with preview functions
  • Whole exam in a single file with several different question types
  • Customizable exam-taking mode & detailed score reports