Pass Fortinet NSE5_SSE_AD-7.6 Exam in First Attempt Easily
Real Fortinet NSE5_SSE_AD-7.6 Exam Questions, Accurate & Verified Answers As Experienced in the Actual Test!

Verified by experts

NSE5_SSE_AD-7.6 Premium File

  • 54 Questions & Answers
  • Last Update: Nov 5, 2026
$69.99 $76.99

Fortinet NSE 5 - FortiSASE and SD-WAN 7.6 Core Administrator NSE5_SSE_AD-7.6 Practice Test 25

Question 240

A support analyst is collecting data for this scenario. An operator claims SD-WAN selected the wrong link based only on aggregate interface bandwidth, but a particular application's active session is not inspected. Which diagnostic check is most targeted?

  1. Inspect session flags, route change, service counters and new-session selection.
  2. Inspect `diagnose sys session list`, SD-WAN service status and relevant traffic logs for the flow.
  3. Inspect route table, SD-WAN zone route, member gateways and flow egress.
  4. Inspect BGP RIB, resolved next-hop path, tunnel route and forwarding table.

Explanation

Correct Answer

B:

Inspect `diagnose sys session list`, SD-WAN service status and relevant traffic logs for the flow. This inspection targets Traffic session table identifies selected route rather than a different configuration issue. The corrective action is: Use FortiOS session and SD-WAN diagnostics to correlate the specific flow's route, rule and member. Expected evidence: The actual source/destination session shows which service and outbound interface the firewall selected.

Incorrect Answers

A:

Inspect session flags, route change, service counters and new-session selection. This is useful when diagnosing Traffic not following new static route. Instead, inspect `diagnose sys session list`, sd-wan service status and relevant traffic logs for the flow.

C:

Inspect route table, SD-WAN zone route, member gateways and flow egress. This is useful when diagnosing Default static route to SD-WAN zone. Instead, inspect `diagnose sys session list`, sd-wan service status and relevant traffic logs for the flow.

D:

Inspect BGP RIB, resolved next-hop path, tunnel route and forwarding table. This is useful when diagnosing BGP route with unreachable recursive next hop. Instead, inspect `diagnose sys session list`, sd-wan service status and relevant traffic logs for the flow.

Question 241

A Fortinet administrator must address this operational problem. A dual-stack branch has working IPv4 SD-WAN routing but IPv6 web sessions time out because only IPv4 default paths were configured. Which response best resolves it?

  1. Restore or validate an appropriate private route via the authorized overlay zone before relying on internet fallback.
  2. Correct the route model and associated member gateways so both intended underlay paths are available for SD-WAN evaluation.
  3. Configure the supported IPv6 member gateways, routes and policies for the authorized dual-stack traffic.
  4. Install a supported default static route through the intended SD-WAN zone or valid associated route model.

Explanation

Correct Answer

C:

Configure the supported IPv6 member gateways, routes and policies for the authorized dual-stack traffic. IPv4 and IPv6 use distinct routing and address-family configuration even on the same physical SD-WAN members. Expected evidence: Controlled IPv6 sessions route through the intended healthy member with valid next-hop resolution. Key limit: An IPv4 source NAT setting does not fix missing IPv6 next-hop reachability.

Incorrect Answers

A:

Restore or validate an appropriate private route via the authorized overlay zone before relying on internet fallback. This could apply to the separate issue Private route leak to internet default: A remote office sends traffic for a private datacenter prefix toward internet default because the overlay route was accidentally withdrawn. For SD-WAN IPv6 route eligibility, the directly relevant action is: Configure the supported IPv6 member gateways, routes and policies for the authorized dual-stack traffic.

B:

Correct the route model and associated member gateways so both intended underlay paths are available for SD-WAN evaluation. This could apply to the separate issue ECMP route availability for two carriers: An SD-WAN branch has two healthy ISPs but only one eligible default route, so routing never considers the backup in selection. For SD-WAN IPv6 route eligibility, the directly relevant action is: Configure the supported IPv6 member gateways, routes and policies for the authorized dual-stack traffic.

D:

Install a supported default static route through the intended SD-WAN zone or valid associated route model. This could apply to the separate issue Default static route to SD-WAN zone: A branch has two active SD-WAN members but the only default route still points directly at an old standalone WAN interface. For SD-WAN IPv6 route eligibility, the directly relevant action is: Configure the supported IPv6 member gateways, routes and policies for the authorized dual-stack traffic.

Question 242

For this situation, a reviewer needs acceptance evidence. A dual-stack branch has working IPv4 SD-WAN routing but IPv6 web sessions time out because only IPv4 default paths were configured. Which result most directly demonstrates success?

  1. Controlled IPv6 sessions route through the intended healthy member with valid next-hop resolution.
  2. Route diagnostics show usable candidate paths and tested failover reaches the backup carrier.
  3. Destination lookup selects the intended private tunnel and no private data is emitted on public underlays.
  4. New internet sessions can reach valid egress members and survive a controlled primary carrier failure.

Explanation

Correct Answer

A:

Controlled IPv6 sessions route through the intended healthy member with valid next-hop resolution. This is the directly relevant check for SD-WAN IPv6 route eligibility. It confirms the required step: Configure the supported IPv6 member gateways, routes and policies for the authorized dual-stack traffic. The operating principle is: IPv4 and IPv6 use distinct routing and address-family configuration even on the same physical SD-WAN members.

Incorrect Answers

B:

Route diagnostics show usable candidate paths and tested failover reaches the backup carrier. This would validate a different scenario, ECMP route availability for two carriers, where An SD-WAN branch has two healthy ISPs but only one eligible default route, so routing never considers the backup in selection. The current case needs evidence for SD-WAN IPv6 route eligibility.

C:

Destination lookup selects the intended private tunnel and no private data is emitted on public underlays. This would validate a different scenario, Private route leak to internet default, where A remote office sends traffic for a private datacenter prefix toward internet default because the overlay route was accidentally withdrawn. The current case needs evidence for SD-WAN IPv6 route eligibility.

D:

New internet sessions can reach valid egress members and survive a controlled primary carrier failure. This would validate a different scenario, Default static route to SD-WAN zone, where A branch has two active SD-WAN members but the only default route still points directly at an old standalone WAN interface. The current case needs evidence for SD-WAN IPv6 route eligibility.

Question 243

A network administrator must explain the underlying control. A dual-stack branch has working IPv4 SD-WAN routing but IPv6 web sessions time out because only IPv4 default paths were configured. Which statement is correct?

  1. IPv4 and IPv6 use distinct routing and address-family configuration even on the same physical SD-WAN members.
  2. Routing determines reachable destinations before SD-WAN rules choose among qualified member paths.
  3. Routing and equal-cost eligibility provide candidate next hops on which SD-WAN service selection operates.
  4. Specific private prefixes should direct private application traffic to the correct overlay next hop.

Explanation

Correct Answer

A:

IPv4 and IPv6 use distinct routing and address-family configuration even on the same physical SD-WAN members. This explains SD-WAN IPv6 route eligibility in the given environment. The implementation decision is: Configure the supported IPv6 member gateways, routes and policies for the authorized dual-stack traffic. Confirm it with: Controlled IPv6 sessions route through the intended healthy member with valid next-hop resolution.

Incorrect Answers

B:

Routing determines reachable destinations before SD-WAN rules choose among qualified member paths. That concept concerns Default static route to SD-WAN zone, not the mechanism needed for SD-WAN IPv6 route eligibility. The relevant principle is: IPv4 and IPv6 use distinct routing and address-family configuration even on the same physical SD-WAN members.

C:

Routing and equal-cost eligibility provide candidate next hops on which SD-WAN service selection operates. That concept concerns ECMP route availability for two carriers, not the mechanism needed for SD-WAN IPv6 route eligibility. The relevant principle is: IPv4 and IPv6 use distinct routing and address-family configuration even on the same physical SD-WAN members.

D:

Specific private prefixes should direct private application traffic to the correct overlay next hop. That concept concerns Private route leak to internet default, not the mechanism needed for SD-WAN IPv6 route eligibility. The relevant principle is: IPv4 and IPv6 use distinct routing and address-family configuration even on the same physical SD-WAN members.

Question 244

An incident team needs to isolate the root cause. A dual-stack branch has working IPv4 SD-WAN routing but IPv6 web sessions time out because only IPv4 default paths were configured. Which investigation should be prioritized?

  1. Inspect IPv6 route table, neighbor discovery, zone policy and session path.
  2. Inspect route table, SD-WAN zone route, member gateways and flow egress.
  3. Inspect longest-prefix route, tunnel status, BGP/static prefix and packet trace.
  4. Inspect route distance, SD-WAN member gateway, ECMP eligibility and route table.

Explanation

Correct Answer

A:

Inspect IPv6 route table, neighbor discovery, zone policy and session path. This inspection targets SD-WAN IPv6 route eligibility rather than a different configuration issue. The corrective action is: Configure the supported IPv6 member gateways, routes and policies for the authorized dual-stack traffic. Expected evidence: Controlled IPv6 sessions route through the intended healthy member with valid next-hop resolution.

Incorrect Answers

B:

Inspect route table, SD-WAN zone route, member gateways and flow egress. This is useful when diagnosing Default static route to SD-WAN zone. Instead, inspect ipv6 route table, neighbor discovery, zone policy and session path.

C:

Inspect longest-prefix route, tunnel status, BGP/static prefix and packet trace. This is useful when diagnosing Private route leak to internet default. Instead, inspect ipv6 route table, neighbor discovery, zone policy and session path.

D:

Inspect route distance, SD-WAN member gateway, ECMP eligibility and route table. This is useful when diagnosing ECMP route availability for two carriers. Instead, inspect ipv6 route table, neighbor discovery, zone policy and session path.

Question 245

A network engineer faces the following FortiSASE or SD-WAN condition. An SD-WAN health probe for a private tunnel target follows the public default route rather than the tunnel and falsely marks the overlay unavailable. What should the engineer do?

  1. Use approved dynamic routing over healthy overlay tunnels and verify exchanged prefixes and route selection.
  2. Restore or validate an appropriate private route via the authorized overlay zone before relying on internet fallback.
  3. Correct the supported probe or target route so reachability is measured through the intended overlay member.
  4. Restore next-hop reachability or supported route recursion for the overlay before accepting the prefix as usable.

Explanation

Correct Answer

C:

Correct the supported probe or target route so reachability is measured through the intended overlay member. Health probes need a valid forwarding route that represents the member being monitored. Expected evidence: Overlay health checks traverse their tunnel path and their status reflects actual private reachability. Key limit: A successful public ping to the same host is not proof the private overlay path is healthy.

Incorrect Answers

A:

Use approved dynamic routing over healthy overlay tunnels and verify exchanged prefixes and route selection. This could apply to the separate issue Overlay route advertisement via BGP: A growing chain has dozens of private subnets across SD-WAN VPN overlays and static routes are missing new sites. For Overlay probe route conflicts with app data, the directly relevant action is: Correct the supported probe or target route so reachability is measured through the intended overlay member.

B:

Restore or validate an appropriate private route via the authorized overlay zone before relying on internet fallback. This could apply to the separate issue Private route leak to internet default: A remote office sends traffic for a private datacenter prefix toward internet default because the overlay route was accidentally withdrawn. For Overlay probe route conflicts with app data, the directly relevant action is: Correct the supported probe or target route so reachability is measured through the intended overlay member.

D:

Restore next-hop reachability or supported route recursion for the overlay before accepting the prefix as usable. This could apply to the separate issue BGP route with unreachable recursive next hop: A FortiGate receives a branch prefix via BGP over an overlay, but the selected BGP next hop cannot be resolved to an active tunnel. For Overlay probe route conflicts with app data, the directly relevant action is: Correct the supported probe or target route so reachability is measured through the intended overlay member.

Question 246

A pilot is validating the implementation. An SD-WAN health probe for a private tunnel target follows the public default route rather than the tunnel and falsely marks the overlay unavailable. Which finding proves that the intended fix works?

  1. Overlay health checks traverse their tunnel path and their status reflects actual private reachability.
  2. Destination lookup selects the intended private tunnel and no private data is emitted on public underlays.
  3. The route resolves to the intended tunnel and representative private sessions complete.
  4. New approved branch prefixes appear in the routing table and private applications reach the intended remote site.

Explanation

Correct Answer

A:

Overlay health checks traverse their tunnel path and their status reflects actual private reachability. This is the directly relevant check for Overlay probe route conflicts with app data. It confirms the required step: Correct the supported probe or target route so reachability is measured through the intended overlay member. The operating principle is: Health probes need a valid forwarding route that represents the member being monitored.

Incorrect Answers

B:

Destination lookup selects the intended private tunnel and no private data is emitted on public underlays. This would validate a different scenario, Private route leak to internet default, where A remote office sends traffic for a private datacenter prefix toward internet default because the overlay route was accidentally withdrawn. The current case needs evidence for Overlay probe route conflicts with app data.

C:

The route resolves to the intended tunnel and representative private sessions complete. This would validate a different scenario, BGP route with unreachable recursive next hop, where A FortiGate receives a branch prefix via BGP over an overlay, but the selected BGP next hop cannot be resolved to an active tunnel. The current case needs evidence for Overlay probe route conflicts with app data.

D:

New approved branch prefixes appear in the routing table and private applications reach the intended remote site. This would validate a different scenario, Overlay route advertisement via BGP, where A growing chain has dozens of private subnets across SD-WAN VPN overlays and static routes are missing new sites. The current case needs evidence for Overlay probe route conflicts with app data.

Question 247

A technical lead asks why the recommended approach works. An SD-WAN health probe for a private tunnel target follows the public default route rather than the tunnel and falsely marks the overlay unavailable. Which mechanism is most relevant?

  1. BGP prefix receipt and route-to-next-hop resolution are separate requirements for forwarding.
  2. Health probes need a valid forwarding route that represents the member being monitored.
  3. Specific private prefixes should direct private application traffic to the correct overlay next hop.
  4. Routing protocols can advertise private prefixes over overlay members while SD-WAN chooses available transports.

Explanation

Correct Answer

B:

Health probes need a valid forwarding route that represents the member being monitored. This explains Overlay probe route conflicts with app data in the given environment. The implementation decision is: Correct the supported probe or target route so reachability is measured through the intended overlay member. Confirm it with: Overlay health checks traverse their tunnel path and their status reflects actual private reachability.

Incorrect Answers

A:

BGP prefix receipt and route-to-next-hop resolution are separate requirements for forwarding. That concept concerns BGP route with unreachable recursive next hop, not the mechanism needed for Overlay probe route conflicts with app data. The relevant principle is: Health probes need a valid forwarding route that represents the member being monitored.

C:

Specific private prefixes should direct private application traffic to the correct overlay next hop. That concept concerns Private route leak to internet default, not the mechanism needed for Overlay probe route conflicts with app data. The relevant principle is: Health probes need a valid forwarding route that represents the member being monitored.

D:

Routing protocols can advertise private prefixes over overlay members while SD-WAN chooses available transports. That concept concerns Overlay route advertisement via BGP, not the mechanism needed for Overlay probe route conflicts with app data. The relevant principle is: Health probes need a valid forwarding route that represents the member being monitored.

Question 248

Before changing production settings, an engineer reviews the symptoms. An SD-WAN health probe for a private tunnel target follows the public default route rather than the tunnel and falsely marks the overlay unavailable. Which evidence is most useful?

  1. Inspect BGP adjacency, advertised routes, recursive next hops and overlay tunnel reachability.
  2. Inspect probe source, target route, tunnel state and captured packets.
  3. Inspect route distance, SD-WAN member gateway, ECMP eligibility and route table.
  4. Inspect BGP RIB, resolved next-hop path, tunnel route and forwarding table.

Explanation

Correct Answer

B:

Inspect probe source, target route, tunnel state and captured packets. This inspection targets Overlay probe route conflicts with app data rather than a different configuration issue. The corrective action is: Correct the supported probe or target route so reachability is measured through the intended overlay member. Expected evidence: Overlay health checks traverse their tunnel path and their status reflects actual private reachability.

Incorrect Answers

A:

Inspect BGP adjacency, advertised routes, recursive next hops and overlay tunnel reachability. This is useful when diagnosing Overlay route advertisement via BGP. Instead, inspect probe source, target route, tunnel state and captured packets.

C:

Inspect route distance, SD-WAN member gateway, ECMP eligibility and route table. This is useful when diagnosing ECMP route availability for two carriers. Instead, inspect probe source, target route, tunnel state and captured packets.

D:

Inspect BGP RIB, resolved next-hop path, tunnel route and forwarding table. This is useful when diagnosing BGP route with unreachable recursive next hop. Instead, inspect probe source, target route, tunnel state and captured packets.

Question 249

A deployment review finds this gap. A FortiGate receives a branch prefix via BGP over an overlay, but the selected BGP next hop cannot be resolved to an active tunnel. What is the most targeted next configuration step?

  1. Correct the supported probe or target route so reachability is measured through the intended overlay member.
  2. Install a supported default static route through the intended SD-WAN zone or valid associated route model.
  3. Restore or validate an appropriate private route via the authorized overlay zone before relying on internet fallback.
  4. Restore next-hop reachability or supported route recursion for the overlay before accepting the prefix as usable.

Explanation

Correct Answer

D:

Restore next-hop reachability or supported route recursion for the overlay before accepting the prefix as usable. BGP prefix receipt and route-to-next-hop resolution are separate requirements for forwarding. Expected evidence: The route resolves to the intended tunnel and representative private sessions complete. Key limit: Changing only SD-WAN service preference does not supply a missing BGP next-hop route.

Incorrect Answers

A:

Correct the supported probe or target route so reachability is measured through the intended overlay member. This could apply to the separate issue Overlay probe route conflicts with app data: An SD-WAN health probe for a private tunnel target follows the public default route rather than the tunnel and falsely marks the overlay unavailable. For BGP route with unreachable recursive next hop, the directly relevant action is: Restore next-hop reachability or supported route recursion for the overlay before accepting the prefix as usable.

B:

Install a supported default static route through the intended SD-WAN zone or valid associated route model. This could apply to the separate issue Default static route to SD-WAN zone: A branch has two active SD-WAN members but the only default route still points directly at an old standalone WAN interface. For BGP route with unreachable recursive next hop, the directly relevant action is: Restore next-hop reachability or supported route recursion for the overlay before accepting the prefix as usable.

C:

Restore or validate an appropriate private route via the authorized overlay zone before relying on internet fallback. This could apply to the separate issue Private route leak to internet default: A remote office sends traffic for a private datacenter prefix toward internet default because the overlay route was accidentally withdrawn. For BGP route with unreachable recursive next hop, the directly relevant action is: Restore next-hop reachability or supported route recursion for the overlay before accepting the prefix as usable.

Question 250

The recommended change has been applied. A FortiGate receives a branch prefix via BGP over an overlay, but the selected BGP next hop cannot be resolved to an active tunnel. Which observation best verifies the intended outcome?

  1. New internet sessions can reach valid egress members and survive a controlled primary carrier failure.
  2. The route resolves to the intended tunnel and representative private sessions complete.
  3. The actual source/destination session shows which service and outbound interface the firewall selected.
  4. Overlay health checks traverse their tunnel path and their status reflects actual private reachability.

Explanation

Correct Answer

B:

The route resolves to the intended tunnel and representative private sessions complete. This is the directly relevant check for BGP route with unreachable recursive next hop. It confirms the required step: Restore next-hop reachability or supported route recursion for the overlay before accepting the prefix as usable. The operating principle is: BGP prefix receipt and route-to-next-hop resolution are separate requirements for forwarding.

Incorrect Answers

A:

New internet sessions can reach valid egress members and survive a controlled primary carrier failure. This would validate a different scenario, Default static route to SD-WAN zone, where A branch has two active SD-WAN members but the only default route still points directly at an old standalone WAN interface. The current case needs evidence for BGP route with unreachable recursive next hop.

C:

The actual source/destination session shows which service and outbound interface the firewall selected. This would validate a different scenario, Traffic session table identifies selected route, where An operator claims SD-WAN selected the wrong link based only on aggregate interface bandwidth, but a particular application's active session is not inspected. The current case needs evidence for BGP route with unreachable recursive next hop.

D:

Overlay health checks traverse their tunnel path and their status reflects actual private reachability. This would validate a different scenario, Overlay probe route conflicts with app data, where An SD-WAN health probe for a private tunnel target follows the public default route rather than the tunnel and falsely marks the overlay unavailable. The current case needs evidence for BGP route with unreachable recursive next hop.

Fortinet NSE 5 - FortiSASE and SD-WAN 7.6 Core Administrator (NSE5_SSE_AD-7.6) Practice Tests

SPECIAL OFFER: GET 10% OFF
This is ONE TIME OFFER

You save
10%

Enter Your Email Address to Receive Your 10% Off Discount Code

SPECIAL OFFER: GET 10% OFF

You save
10%

Use Discount Code:

A confirmation link was sent to your e-mail.

Please check your mailbox for a message from support@examlabs.com and follow the directions.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your email address below to get started with our interactive software demo of your free trial.

  • Realistic exam simulation and exam editor with preview functions
  • Whole exam in a single file with several different question types
  • Customizable exam-taking mode & detailed score reports