Pass Fortinet NSE7_SSE_AR-26 Exam in First Attempt Easily
Real Fortinet NSE7_SSE_AR-26 Exam Questions, Accurate & Verified Answers As Experienced in the Actual Test!

Verified by experts

NSE7_SSE_AR-26 Premium File

  • 50 Questions & Answers
  • Last Update: Nov 9, 2026
$69.99 $76.99

Fortinet NSE 7 - FortiSASE 26 Architect NSE7_SSE_AR-26 Practice Test 6

Question 50

A Fortinet network and security operation is not meeting expectations: FortiManager deploys one SD-WAN blueprint to branches with different LAN subnets, but the template hardcodes the headquarters LAN prefix and produces duplicate route advertisements. Which evidence should be investigated first to isolate this particular fault?

  1. Inspect link utilization, SD-WAN service matches, SLA data, policy priorities and flow-level egress.
  2. Inspect device metadata, CSV import mappings, generated configuration differences, BGP advertisements and rejected objects.
  3. Inspect serial inventory, device assignment, blueprint variables, onboarding task logs and resulting branch configurations.
  4. Inspect SLA probe mode, configured targets, eligible observed flows, member statistics and times of missing samples.

Explanation

Correct Answer

B:

Inspect device metadata, CSV import mappings, generated configuration differences, BGP advertisements and rejected objects. These checks target the described failure in Applying a consistent branch template without overriding site variables. Appropriate response: Use blueprint variables or approved per-device mappings for branch-specific addresses while keeping standardized reusable SD-WAN policy sections. Success criteria: Each pilot device advertises its unique LAN prefix, and the manager reports the intended configuration without collision warnings.

Incorrect Answers

A:

Inspect link utilization, SD-WAN service matches, SLA data, policy priorities and flow-level egress. Those checks investigate Investigating branch performance after WAN capacity growth instead of the Applying a consistent branch template without overriding site variables failure. The focused investigation should be: Inspect device metadata, CSV import mappings, generated configuration differences, BGP advertisements and rejected objects.

C:

Inspect serial inventory, device assignment, blueprint variables, onboarding task logs and resulting branch configurations. Those checks investigate Choosing zero-touch provisioning for hundreds of new sites instead of the Applying a consistent branch template without overriding site variables failure. The focused investigation should be: Inspect device metadata, CSV import mappings, generated configuration differences, BGP advertisements and rejected objects.

D:

Inspect SLA probe mode, configured targets, eligible observed flows, member statistics and times of missing samples. Those checks investigate Selecting active versus passive SLA measurement for a new branch instead of the Applying a consistent branch template without overriding site variables failure. The focused investigation should be: Inspect device metadata, CSV import mappings, generated configuration differences, BGP advertisements and rejected objects.

Question 51

A Fortinet FortiSASE 26 Architect team reviews this production scenario: A field office buys a faster broadband plan but cloud upload times remain poor because SD-WAN policies still pin bulk transfers to a saturated legacy circuit. Which administration or design action best meets the stated requirement?

  1. Add and validate the approved interface as an eligible SD-WAN member in the intended zone and confirm associated routes and policies.
  2. Use approved reliable probe destinations and appropriate fail criteria to distinguish target reachability from broader underlay service health.
  3. Measure per-member throughput and revise approved traffic selection only after confirming SLA criteria, route eligibility and application treatment.
  4. Validate physical or provider underlay reachability before implementing a supported IPsec overlay and routing design for approved application prefixes.

Explanation

Correct Answer

C:

Measure per-member throughput and revise approved traffic selection only after confirming SLA criteria, route eligibility and application treatment. Technical basis: Available circuit bandwidth, active member eligibility and application steering are separate variables in SD-WAN delivery. Acceptance evidence: Bulk traffic follows the intended suitable uplink under load while priority voice retains protected quality and both paths generate evidence. Deployment boundary: Confirm the relevant FortiSASE 26 license, deployment type, FortiOS 7.4/7.6 support, topology and official feature prerequisites before applying this educational scenario to production.

Incorrect Answers

A:

Add and validate the approved interface as an eligible SD-WAN member in the intended zone and confirm associated routes and policies. This is a sensible intervention in the separate Mapping SD-WAN members into zones consistently scenario. It does not resolve the present Investigating branch performance after WAN capacity growth requirement. For the current problem, use: Measure per-member throughput and revise approved traffic selection only after confirming SLA criteria, route eligibility and application treatment.

B:

Use approved reliable probe destinations and appropriate fail criteria to distinguish target reachability from broader underlay service health. This is a sensible intervention in the separate Avoiding false outage conclusions from one unreachable probe server scenario. It does not resolve the present Investigating branch performance after WAN capacity growth requirement. For the current problem, use: Measure per-member throughput and revise approved traffic selection only after confirming SLA criteria, route eligibility and application treatment.

D:

Validate physical or provider underlay reachability before implementing a supported IPsec overlay and routing design for approved application prefixes. This is a sensible intervention in the separate Separating underlay reachability from encrypted overlay policy scenario. It does not resolve the present Investigating branch performance after WAN capacity growth requirement. For the current problem, use: Measure per-member throughput and revise approved traffic selection only after confirming SLA criteria, route eligibility and application treatment.

Question 52

During Fortinet SD-WAN and FortiSASE acceptance testing, the team observes the following: A field office buys a faster broadband plan but cloud upload times remain poor because SD-WAN policies still pin bulk transfers to a saturated legacy circuit. Which result most directly demonstrates the intended outcome?

  1. Bulk traffic follows the intended suitable uplink under load while priority voice retains protected quality and both paths generate evidence.
  2. Authorized SaaS sessions egress the approved local WAN and generate matching security and routing logs, while protected private routes stay in the overlay.
  3. Observed SLA statistics correspond to supported traffic monitoring paths and an active check supplies evidence when passive coverage is insufficient.
  4. Branch underlay probes reach the intended gateway, overlay peers become established and traffic takes the authorized encrypted path.

Explanation

Correct Answer

A:

Bulk traffic follows the intended suitable uplink under load while priority voice retains protected quality and both paths generate evidence. This directly verifies Investigating branch performance after WAN capacity growth. Required action: Measure per-member throughput and revise approved traffic selection only after confirming SLA criteria, route eligibility and application treatment. Why it is a suitable test: Available circuit bandwidth, active member eligibility and application steering are separate variables in SD-WAN delivery.

Incorrect Answers

B:

Authorized SaaS sessions egress the approved local WAN and generate matching security and routing logs, while protected private routes stay in the overlay. This verifies the separate Building direct internet access without bypassing inspection situation rather than Investigating branch performance after WAN capacity growth. The decisive outcome here is: Bulk traffic follows the intended suitable uplink under load while priority voice retains protected quality and both paths generate evidence.

C:

Observed SLA statistics correspond to supported traffic monitoring paths and an active check supplies evidence when passive coverage is insufficient. This verifies the separate Reconciling passive monitoring with hardware offload situation rather than Investigating branch performance after WAN capacity growth. The decisive outcome here is: Bulk traffic follows the intended suitable uplink under load while priority voice retains protected quality and both paths generate evidence.

D:

Branch underlay probes reach the intended gateway, overlay peers become established and traffic takes the authorized encrypted path. This verifies the separate Separating underlay reachability from encrypted overlay policy situation rather than Investigating branch performance after WAN capacity growth. The decisive outcome here is: Bulk traffic follows the intended suitable uplink under load while priority voice retains protected quality and both paths generate evidence.

Question 53

An architect is explaining the underlying Fortinet technology in this situation: A field office buys a faster broadband plan but cloud upload times remain poor because SD-WAN policies still pin bulk transfers to a saturated legacy circuit. Which technical principle most directly explains the appropriate solution?

  1. SD-WAN zones abstract member interfaces for route and policy selection while individual member health still governs availability.
  2. Active measurement sends test probes while passive measurement depends on eligible observed traffic and its supported monitoring behavior.
  3. Available circuit bandwidth, active member eligibility and application steering are separate variables in SD-WAN delivery.
  4. Underlay transport provides path availability while the overlay supplies encrypted logical connectivity and its own routing and security requirements.

Explanation

Correct Answer

C:

Available circuit bandwidth, active member eligibility and application steering are separate variables in SD-WAN delivery. This is the governing technical explanation for Investigating branch performance after WAN capacity growth. Correct configuration: Measure per-member throughput and revise approved traffic selection only after confirming SLA criteria, route eligibility and application treatment. Observable outcome: Bulk traffic follows the intended suitable uplink under load while priority voice retains protected quality and both paths generate evidence.

Incorrect Answers

A:

SD-WAN zones abstract member interfaces for route and policy selection while individual member health still governs availability. That principle describes Mapping SD-WAN members into zones consistently, not the mechanism that governs Investigating branch performance after WAN capacity growth. The relevant principle is: Available circuit bandwidth, active member eligibility and application steering are separate variables in SD-WAN delivery.

B:

Active measurement sends test probes while passive measurement depends on eligible observed traffic and its supported monitoring behavior. That principle describes Selecting active versus passive SLA measurement for a new branch, not the mechanism that governs Investigating branch performance after WAN capacity growth. The relevant principle is: Available circuit bandwidth, active member eligibility and application steering are separate variables in SD-WAN delivery.

D:

Underlay transport provides path availability while the overlay supplies encrypted logical connectivity and its own routing and security requirements. That principle describes Separating underlay reachability from encrypted overlay policy, not the mechanism that governs Investigating branch performance after WAN capacity growth. The relevant principle is: Available circuit bandwidth, active member eligibility and application steering are separate variables in SD-WAN delivery.

Question 54

The FortiSASE or SD-WAN design fails to apply the necessary safeguard. A field office buys a faster broadband plan but cloud upload times remain poor because SD-WAN policies still pin bulk transfers to a saturated legacy circuit. Which operational or security exposure most directly follows?

  1. Relying only on aggregate utilization may blame congestion when the actual event was an SLA-driven member change.
  2. Blindly raising bandwidth metadata without checking actual member selection can leave congestion unchanged.
  3. A route-only DIA change can bypass inspection or leave local clients unable to reach cloud services after translation fails.
  4. Mixing customer routes can cause private data paths to reach another tenant and complicate incident containment.

Explanation

Correct Answer

B:

Blindly raising bandwidth metadata without checking actual member selection can leave congestion unchanged. This is the central risk in Investigating branch performance after WAN capacity growth. Appropriate safeguard: Measure per-member throughput and revise approved traffic selection only after confirming SLA criteria, route eligibility and application treatment. Evidence the safeguard works: Bulk traffic follows the intended suitable uplink under load while priority voice retains protected quality and both paths generate evidence.

Incorrect Answers

A:

Relying only on aggregate utilization may blame congestion when the actual event was an SLA-driven member change. This exposure applies to Correlating FortiAnalyzer SLA events with affected services, not the direct consequence of Investigating branch performance after WAN capacity growth. The actual case-specific risk is: Blindly raising bandwidth metadata without checking actual member selection can leave congestion unchanged.

C:

A route-only DIA change can bypass inspection or leave local clients unable to reach cloud services after translation fails. This exposure applies to Building direct internet access without bypassing inspection, not the direct consequence of Investigating branch performance after WAN capacity growth. The actual case-specific risk is: Blindly raising bandwidth metadata without checking actual member selection can leave congestion unchanged.

D:

Mixing customer routes can cause private data paths to reach another tenant and complicate incident containment. This exposure applies to Assessing multi-tenant MSSP overlay separation, not the direct consequence of Investigating branch performance after WAN capacity growth. The actual case-specific risk is: Blindly raising bandwidth metadata without checking actual member selection can leave congestion unchanged.

Question 55

A Fortinet network and security operation is not meeting expectations: A field office buys a faster broadband plan but cloud upload times remain poor because SD-WAN policies still pin bulk transfers to a saturated legacy circuit. Which evidence should be investigated first to isolate this particular fault?

  1. Inspect default and policy routes, NAT behavior, SD-WAN rules, firewall counters and egress addresses.
  2. Inspect probe time series, transition logs, jitter distribution, rule priorities and state-change settings.
  3. Inspect link utilization, SD-WAN service matches, SLA data, policy priorities and flow-level egress.
  4. Inspect VRF assignments, overlay peers, route tables, tenant policy packages and cross-tenant packet captures.

Explanation

Correct Answer

C:

Inspect link utilization, SD-WAN service matches, SLA data, policy priorities and flow-level egress. These checks target the described failure in Investigating branch performance after WAN capacity growth. Appropriate response: Measure per-member throughput and revise approved traffic selection only after confirming SLA criteria, route eligibility and application treatment. Success criteria: Bulk traffic follows the intended suitable uplink under load while priority voice retains protected quality and both paths generate evidence.

Incorrect Answers

A:

Inspect default and policy routes, NAT behavior, SD-WAN rules, firewall counters and egress addresses. Those checks investigate Building direct internet access without bypassing inspection instead of the Investigating branch performance after WAN capacity growth failure. The focused investigation should be: Inspect link utilization, SD-WAN service matches, SLA data, policy priorities and flow-level egress.

B:

Inspect probe time series, transition logs, jitter distribution, rule priorities and state-change settings. Those checks investigate Diagnosing an oscillating SLA member during variable jitter instead of the Investigating branch performance after WAN capacity growth failure. The focused investigation should be: Inspect link utilization, SD-WAN service matches, SLA data, policy priorities and flow-level egress.

D:

Inspect VRF assignments, overlay peers, route tables, tenant policy packages and cross-tenant packet captures. Those checks investigate Assessing multi-tenant MSSP overlay separation instead of the Investigating branch performance after WAN capacity growth failure. The focused investigation should be: Inspect link utilization, SD-WAN service matches, SLA data, policy priorities and flow-level egress.

Question 56

A Fortinet FortiSASE 26 Architect team reviews this production scenario: A call center's critical CRM sessions disconnect after one WAN member fails; administrators expect every existing TCP connection to move transparently without regard to NAT and session state. Which administration or design action best meets the stated requirement?

  1. Configure supported local DIA routing and appropriate FortiGate security inspection, SNAT and SD-WAN selection for the designated applications.
  2. Design failover acceptance for new and existing sessions separately, including supported session handling and source-address continuity constraints.
  3. Design separate supported VRF-aware overlays and tenant-specific routing and policy boundaries, validating shared-control-plane access with cross-tenant negative tests.
  4. Configure a business-appropriate performance SLA using supported latency, jitter and packet-loss thresholds and bind the voice steering rule to qualified members.

Explanation

Correct Answer

B:

Design failover acceptance for new and existing sessions separately, including supported session handling and source-address continuity constraints. Technical basis: Routing failover does not automatically preserve a connection's original source address or transport session across independent ISPs. Acceptance evidence: New sessions reach CRM on the secondary member, and any interruption to established sessions matches documented translation and application behavior. Deployment boundary: Confirm the relevant FortiSASE 26 license, deployment type, FortiOS 7.4/7.6 support, topology and official feature prerequisites before applying this educational scenario to production.

Incorrect Answers

A:

Configure supported local DIA routing and appropriate FortiGate security inspection, SNAT and SD-WAN selection for the designated applications. This is a sensible intervention in the separate Building direct internet access without bypassing inspection scenario. It does not resolve the present Testing a failover policy with stateful sessions requirement. For the current problem, use: Design failover acceptance for new and existing sessions separately, including supported session handling and source-address continuity constraints.

C:

Design separate supported VRF-aware overlays and tenant-specific routing and policy boundaries, validating shared-control-plane access with cross-tenant negative tests. This is a sensible intervention in the separate Assessing multi-tenant MSSP overlay separation scenario. It does not resolve the present Testing a failover policy with stateful sessions requirement. For the current problem, use: Design failover acceptance for new and existing sessions separately, including supported session handling and source-address continuity constraints.

D:

Configure a business-appropriate performance SLA using supported latency, jitter and packet-loss thresholds and bind the voice steering rule to qualified members. This is a sensible intervention in the separate Defining SLA thresholds around business voice quality scenario. It does not resolve the present Testing a failover policy with stateful sessions requirement. For the current problem, use: Design failover acceptance for new and existing sessions separately, including supported session handling and source-address continuity constraints.

Question 57

During Fortinet SD-WAN and FortiSASE acceptance testing, the team observes the following: A call center's critical CRM sessions disconnect after one WAN member fails; administrators expect every existing TCP connection to move transparently without regard to NAT and session state. Which result most directly demonstrates the intended outcome?

  1. The primary ISP fault is isolated to one member, and the alternate path continues approved transactions without reusing the failed modem.
  2. When the primary hub is withdrawn in a controlled drill, branch sessions establish the intended secondary routing path and recover when policy permits.
  3. New sessions reach CRM on the secondary member, and any interruption to established sessions matches documented translation and application behavior.
  4. Simulated loss on the preferred member causes new voice sessions to select a compliant alternative while the decision appears in SLA monitoring.

Explanation

Correct Answer

C:

New sessions reach CRM on the secondary member, and any interruption to established sessions matches documented translation and application behavior. This directly verifies Testing a failover policy with stateful sessions. Required action: Design failover acceptance for new and existing sessions separately, including supported session handling and source-address continuity constraints. Why it is a suitable test: Routing failover does not automatically preserve a connection's original source address or transport session across independent ISPs.

Incorrect Answers

A:

The primary ISP fault is isolated to one member, and the alternate path continues approved transactions without reusing the failed modem. This verifies the separate Preserving dual-ISP branch failover with independent paths situation rather than Testing a failover policy with stateful sessions. The decisive outcome here is: New sessions reach CRM on the secondary member, and any interruption to established sessions matches documented translation and application behavior.

B:

When the primary hub is withdrawn in a controlled drill, branch sessions establish the intended secondary routing path and recover when policy permits. This verifies the separate Selecting resilient dual-hub architecture during a regional outage situation rather than Testing a failover policy with stateful sessions. The decisive outcome here is: New sessions reach CRM on the secondary member, and any interruption to established sessions matches documented translation and application behavior.

D:

Simulated loss on the preferred member causes new voice sessions to select a compliant alternative while the decision appears in SLA monitoring. This verifies the separate Defining SLA thresholds around business voice quality situation rather than Testing a failover policy with stateful sessions. The decisive outcome here is: New sessions reach CRM on the secondary member, and any interruption to established sessions matches documented translation and application behavior.

Question 58

An architect is explaining the underlying Fortinet technology in this situation: A call center's critical CRM sessions disconnect after one WAN member fails; administrators expect every existing TCP connection to move transparently without regard to NAT and session state. Which technical principle most directly explains the appropriate solution?

  1. Routing failover does not automatically preserve a connection's original source address or transport session across independent ISPs.
  2. Direct internet access changes the traffic path but does not remove the requirement for firewall policy, addressing and application controls.
  3. VRF-aware overlay segmentation separates routing domains even when management infrastructure or physical transport is operated by a common provider.
  4. Active measurement sends test probes while passive measurement depends on eligible observed traffic and its supported monitoring behavior.

Explanation

Correct Answer

A:

Routing failover does not automatically preserve a connection's original source address or transport session across independent ISPs. This is the governing technical explanation for Testing a failover policy with stateful sessions. Correct configuration: Design failover acceptance for new and existing sessions separately, including supported session handling and source-address continuity constraints. Observable outcome: New sessions reach CRM on the secondary member, and any interruption to established sessions matches documented translation and application behavior.

Incorrect Answers

B:

Direct internet access changes the traffic path but does not remove the requirement for firewall policy, addressing and application controls. That principle describes Building direct internet access without bypassing inspection, not the mechanism that governs Testing a failover policy with stateful sessions. The relevant principle is: Routing failover does not automatically preserve a connection's original source address or transport session across independent ISPs.

C:

VRF-aware overlay segmentation separates routing domains even when management infrastructure or physical transport is operated by a common provider. That principle describes Assessing multi-tenant MSSP overlay separation, not the mechanism that governs Testing a failover policy with stateful sessions. The relevant principle is: Routing failover does not automatically preserve a connection's original source address or transport session across independent ISPs.

D:

Active measurement sends test probes while passive measurement depends on eligible observed traffic and its supported monitoring behavior. That principle describes Selecting active versus passive SLA measurement for a new branch, not the mechanism that governs Testing a failover policy with stateful sessions. The relevant principle is: Routing failover does not automatically preserve a connection's original source address or transport session across independent ISPs.

Question 59

The FortiSASE or SD-WAN design fails to apply the necessary safeguard. A call center's critical CRM sessions disconnect after one WAN member fails; administrators expect every existing TCP connection to move transparently without regard to NAT and session state. Which operational or security exposure most directly follows?

  1. A route-only DIA change can bypass inspection or leave local clients unable to reach cloud services after translation fails.
  2. Promising universal zero-loss failover can hide applications that need reconnection or state-aware design.
  3. Treating underlay outages as firewall-policy defects leads to broad unsafe permit rules that cannot repair the WAN.
  4. Latency-only optimization may route sensitive real-time calls over circuits with damaging loss or jitter.

Explanation

Correct Answer

B:

Promising universal zero-loss failover can hide applications that need reconnection or state-aware design. This is the central risk in Testing a failover policy with stateful sessions. Appropriate safeguard: Design failover acceptance for new and existing sessions separately, including supported session handling and source-address continuity constraints. Evidence the safeguard works: New sessions reach CRM on the secondary member, and any interruption to established sessions matches documented translation and application behavior.

Incorrect Answers

A:

A route-only DIA change can bypass inspection or leave local clients unable to reach cloud services after translation fails. This exposure applies to Building direct internet access without bypassing inspection, not the direct consequence of Testing a failover policy with stateful sessions. The actual case-specific risk is: Promising universal zero-loss failover can hide applications that need reconnection or state-aware design.

C:

Treating underlay outages as firewall-policy defects leads to broad unsafe permit rules that cannot repair the WAN. This exposure applies to Separating underlay reachability from encrypted overlay policy, not the direct consequence of Testing a failover policy with stateful sessions. The actual case-specific risk is: Promising universal zero-loss failover can hide applications that need reconnection or state-aware design.

D:

Latency-only optimization may route sensitive real-time calls over circuits with damaging loss or jitter. This exposure applies to Defining SLA thresholds around business voice quality, not the direct consequence of Testing a failover policy with stateful sessions. The actual case-specific risk is: Promising universal zero-loss failover can hide applications that need reconnection or state-aware design.

Question 60

A Fortinet network and security operation is not meeting expectations: A call center's critical CRM sessions disconnect after one WAN member fails; administrators expect every existing TCP connection to move transparently without regard to NAT and session state. Which evidence should be investigated first to isolate this particular fault?

  1. Inspect session tables, selected member, source NAT address, session reevaluation events and CRM reconnect behavior.
  2. Inspect default and policy routes, NAT behavior, SD-WAN rules, firewall counters and egress addresses.
  3. Inspect FortiOS feature support, offload status, passive counters, active test results and policy-selected members.
  4. Inspect VRF assignments, overlay peers, route tables, tenant policy packages and cross-tenant packet captures.

Explanation

Correct Answer

A:

Inspect session tables, selected member, source NAT address, session reevaluation events and CRM reconnect behavior. These checks target the described failure in Testing a failover policy with stateful sessions. Appropriate response: Design failover acceptance for new and existing sessions separately, including supported session handling and source-address continuity constraints. Success criteria: New sessions reach CRM on the secondary member, and any interruption to established sessions matches documented translation and application behavior.

Incorrect Answers

B:

Inspect default and policy routes, NAT behavior, SD-WAN rules, firewall counters and egress addresses. Those checks investigate Building direct internet access without bypassing inspection instead of the Testing a failover policy with stateful sessions failure. The focused investigation should be: Inspect session tables, selected member, source NAT address, session reevaluation events and CRM reconnect behavior.

C:

Inspect FortiOS feature support, offload status, passive counters, active test results and policy-selected members. Those checks investigate Reconciling passive monitoring with hardware offload instead of the Testing a failover policy with stateful sessions failure. The focused investigation should be: Inspect session tables, selected member, source NAT address, session reevaluation events and CRM reconnect behavior.

D:

Inspect VRF assignments, overlay peers, route tables, tenant policy packages and cross-tenant packet captures. Those checks investigate Assessing multi-tenant MSSP overlay separation instead of the Testing a failover policy with stateful sessions failure. The focused investigation should be: Inspect session tables, selected member, source NAT address, session reevaluation events and CRM reconnect behavior.

Fortinet NSE 7 - FortiSASE 26 Architect (NSE7_SSE_AR-26) Practice Tests

SPECIAL OFFER: GET 10% OFF
This is ONE TIME OFFER

You save
10%

Enter Your Email Address to Receive Your 10% Off Discount Code

SPECIAL OFFER: GET 10% OFF

You save
10%

Use Discount Code:

A confirmation link was sent to your e-mail.

Please check your mailbox for a message from support@examlabs.com and follow the directions.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your email address below to get started with our interactive software demo of your free trial.

  • Realistic exam simulation and exam editor with preview functions
  • Whole exam in a single file with several different question types
  • Customizable exam-taking mode & detailed score reports