Pass Juniper JN0-364 Exam in First Attempt Easily
Real Juniper JN0-364 Exam Questions, Accurate & Verified Answers As Experienced in the Actual Test!

Verified by experts

JN0-364 Premium File

  • 69 Questions & Answers
  • Last Update: Nov 4, 2026
$69.99 $76.99

Service Provider Routing and Switching, Specialist (JNCIS-SP) JN0-364 Practice Test 54

Question 530

The on-call engineer at Atlas Port Services receives this fault report: During a primary uplink outage, a standby port does not take over and bridge role data indicate it was not a valid alternate. What initial check best isolates the actual failing protocol stage?

  1. Inspect STP/RSTP role, state, path cost and BPDU information on both uplinks during normal and failure tests.
  2. Inspect whether the port is a true edge, count inbound BPDUs and verify the intended BPDU-protection action on that interface.
  3. Compare root bridge ID, local bridge ID, port path costs and received BPDUs across the affected VLAN/instance.
  4. Compare MST region name, revision, VLAN mappings and instance-specific BPDU/root data across the connected switches.

Correct answer: A

Explanation of each choice

A.

Inspect STP/RSTP role, state, path cost and BPDU information on both uplinks during normal and failure tests. A designated alternate port can be intentionally discarding and still serve as a valid backup; oper-state alone does not prove failure.

B.

The check diagnoses a different layer of service. Its source issue is: A user access port suddenly receives bridge protocol data units from an unmanaged switch and risks forming an unauthorized transit path. The relevant initial check is: Inspect STP/RSTP role, state, path cost and BPDU information on both uplinks during normal and failure tests.

C.

This check may help with another root cause, for example: The provider expects a designated core switch to remain root but a customer's bridge ID and priority cause repeated unwanted root elections. It does not test the first failed condition; start with: Inspect STP/RSTP role, state, path cost and BPDU information on both uplinks during normal and failure tests.

D.

That evidence could be normal while the reported defect persists. It is aimed at: Two neighboring switches intended to share one MSTP region have different VLAN-to-instance mappings and behave as boundary devices. Instead inspect: Inspect STP/RSTP role, state, path cost and BPDU information on both uplinks during normal and failure tests.

Question 531

The provider operations team at Baystone Energy reports: Two neighboring switches intended to share one MSTP region have different VLAN-to-instance mappings and behave as boundary devices. Which implementation decision best corrects the cause?

  1. Align the MST region name, revision and VLAN-to-instance mapping across members, then verify inter-region boundaries where intentional.
  2. Set explicit appropriate bridge priority for the intended root and verify root/port roles across the affected spanning-tree instance.
  3. Inspect and correct the VSTP instance and root/port priorities for the affected VLAN without needlessly changing other VLAN instances.
  4. Validate alternate and root port roles and correct the path-cost or topology configuration required for a usable backup path.

Correct answer: A

Explanation of each choice

A.

Align the MST region name, revision and VLAN-to-instance mapping across members, then verify inter-region boundaries where intentional. The case-specific reason is: A shared VLAN number is insufficient to join the same MST region if the region configuration and digest differ. A direct acceptance test is: MST region members report compatible configuration identity and instance-specific root/port roles align with the VLAN design.

B.

This action may apply to a different problem, for example: The provider expects a designated core switch to remain root but a customer's bridge ID and priority cause repeated unwanted root elections. It does not repair the stated failure boundary. The case-specific reason is: A shared VLAN number is insufficient to join the same MST region if the region configuration and digest differ.

C.

The other action is relevant when One VLAN blocks a provider trunk while another forwards correctly because the two VLANs have separate VSTP root and port decisions. The current case instead requires: Align the MST region name, revision and VLAN-to-instance mapping across members, then verify inter-region boundaries where intentional. The distinction is: A shared VLAN number is insufficient to join the same MST region if the region configuration and digest differ.

D.

That would address a separate configuration fault: During a primary uplink outage, a standby port does not take over and bridge role data indicate it was not a valid alternate. This stem identifies a different cause, corrected by: Align the MST region name, revision and VLAN-to-instance mapping across members, then verify inter-region boundaries where intentional.

Question 532

During a post-change check at Baystone Energy, the original condition was: Two neighboring switches intended to share one MSTP region have different VLAN-to-instance mappings and behave as boundary devices. What evidence would validate the corrected behavior?

  1. The intended bridge is elected root and all other bridges show a coherent root path and alternate/discarding links.
  2. The host port forwards promptly while an unexpected BPDU is detected and handled by the configured protection policy.
  3. The target VLAN has the intended loop-free forwarding tree while unaffected VLANs retain their existing paths.
  4. MST region members report compatible configuration identity and instance-specific root/port roles align with the VLAN design.

Correct answer: D

Explanation of each choice

A.

That check proves something else, such as: A newly connected low-end switch becomes the spanning-tree root after a topology change, routing Ethernet traffic along an inefficient path. It could pass while the stated problem remains. The targeted evidence here is: MST region members report compatible configuration identity and instance-specific root/port roles align with the VLAN design.

B.

This would be valid for another situation: A server-only switchport repeatedly transitions through unnecessary topology states when the connected endpoint restarts. It does not establish that the failing boundary in this scenario works; verify: MST region members report compatible configuration identity and instance-specific root/port roles align with the VLAN design.

C.

The observation confirms a different component's behavior. Its source context is: One VLAN blocks a provider trunk while another forwards correctly because the two VLANs have separate VSTP root and port decisions. In this case the success criterion is: MST region members report compatible configuration identity and instance-specific root/port roles align with the VLAN design.

D.

MST region members report compatible configuration identity and instance-specific root/port roles align with the VLAN design. A shared VLAN number is insufficient to join the same MST region if the region configuration and digest differ.

Question 533

At Baystone Energy, an engineer is asked to explain this case: Two neighboring switches intended to share one MSTP region have different VLAN-to-instance mappings and behave as boundary devices. Which underlying routing or switching principle accounts for the appropriate solution?

  1. VSTP maintains spanning-tree calculations per VLAN, allowing different VLANs to use different root and forwarding paths.
  2. MSTP maps multiple VLANs to spanning-tree instances, and consistent region configuration is required for shared internal operation.
  3. Spanning tree selects a root bridge based on bridge identifier priority and MAC address, then computes loop-free forwarding paths.
  4. BPDU protection guards edge ports against unexpected bridge participation, unlike root protection which guards the root role in an existing spanning-tree topology.

Correct answer: B

Explanation of each choice

A.

The statement can be true when One VLAN blocks a provider trunk while another forwards correctly because the two VLANs have separate VSTP root and port decisions. But it does not explain the reported failure. Here: A shared VLAN number is insufficient to join the same MST region if the region configuration and digest differ.

B.

MSTP maps multiple VLANs to spanning-tree instances, and consistent region configuration is required for shared internal operation. The key distinction is: A shared VLAN number is insufficient to join the same MST region if the region configuration and digest differ. Accordingly the remedy is: Align the MST region name, revision and VLAN-to-instance mapping across members, then verify inter-region boundaries where intentional.

C.

This explains a separate protocol behavior: A newly connected low-end switch becomes the spanning-tree root after a topology change, routing Ethernet traffic along an inefficient path. In the current facts, the controlling mechanism is: MSTP maps multiple VLANs to spanning-tree instances, and consistent region configuration is required for shared internal operation.

D.

The statement can be true when A provider edge customer handoff occasionally introduces an unapproved switch and the operator wants the interface to fail safely if BPDUs appear. But it does not explain the reported failure. Here: A shared VLAN number is insufficient to join the same MST region if the region configuration and digest differ.

Question 534

A risk assessment at Baystone Energy identifies: Two neighboring switches intended to share one MSTP region have different VLAN-to-instance mappings and behave as boundary devices. Which practical consequence is most specifically tied to this failure?

  1. An unauthorized bridge can alter topology or create loops if BPDUs on an edge port are ignored.
  2. Unexpected region boundaries can alter per-instance forwarding or block paths that the design expected to carry traffic.
  3. A single VLAN can blackhole or loop while other VLANs appear healthy, masking a per-VLAN control-plane fault.
  4. A lost or spoofed spanning-tree control message can open a Layer 2 forwarding loop or shift the root outside trusted infrastructure.

Correct answer: B

Explanation of each choice

A.

The concern could occur elsewhere when A user access port suddenly receives bridge protocol data units from an unmanaged switch and risks forming an unauthorized transit path. For the stated scenario, the immediate risk is: Unexpected region boundaries can alter per-instance forwarding or block paths that the design expected to carry traffic.

B.

Unexpected region boundaries can alter per-instance forwarding or block paths that the design expected to carry traffic. The direct mitigation is: Align the MST region name, revision and VLAN-to-instance mapping across members, then verify inter-region boundaries where intentional.

C.

It is a risk in another topology or protocol state: One VLAN blocks a provider trunk while another forwards correctly because the two VLANs have separate VSTP root and port decisions. Here the most direct failure path is: Unexpected region boundaries can alter per-instance forwarding or block paths that the design expected to carry traffic.

D.

The concern could occur elsewhere when A blocked redundant path becomes vulnerable to unidirectional failure when expected BPDUs stop, allowing accidental forwarding of both halves of a loop. For the stated scenario, the immediate risk is: Unexpected region boundaries can alter per-instance forwarding or block paths that the design expected to carry traffic.

Question 535

The on-call engineer at Baystone Energy receives this fault report: Two neighboring switches intended to share one MSTP region have different VLAN-to-instance mappings and behave as boundary devices. What initial check best isolates the actual failing protocol stage?

  1. Compare VSTP root and port states for the affected and unaffected VLANs on the same physical trunk.
  2. Inspect the specific inbound BPDU superiority/absence pattern, role and designated protection state before selecting the guard.
  3. Compare MST region name, revision, VLAN mappings and instance-specific BPDU/root data across the connected switches.
  4. Inspect whether the port is a true edge, count inbound BPDUs and verify the intended BPDU-protection action on that interface.

Correct answer: C

Explanation of each choice

A.

This check may help with another root cause, for example: One VLAN blocks a provider trunk while another forwards correctly because the two VLANs have separate VSTP root and port decisions. It does not test the first failed condition; start with: Compare MST region name, revision, VLAN mappings and instance-specific BPDU/root data across the connected switches.

B.

That evidence could be normal while the reported defect persists. It is aimed at: A blocked redundant path becomes vulnerable to unidirectional failure when expected BPDUs stop, allowing accidental forwarding of both halves of a loop. Instead inspect: Compare MST region name, revision, VLAN mappings and instance-specific BPDU/root data across the connected switches.

C.

Compare MST region name, revision, VLAN mappings and instance-specific BPDU/root data across the connected switches. A shared VLAN number is insufficient to join the same MST region if the region configuration and digest differ.

D.

This check may help with another root cause, for example: A provider edge customer handoff occasionally introduces an unapproved switch and the operator wants the interface to fail safely if BPDUs appear. It does not test the first failed condition; start with: Compare MST region name, revision, VLAN mappings and instance-specific BPDU/root data across the connected switches.

Question 536

A production change request at Stonebridge Hospitality includes this finding: A provider partitions VLANs across MST instances but one participating switch uses another configuration digest, producing unexpected root decisions. What should the engineer change to address it?

  1. Enable appropriate BPDU protection on a confirmed edge/customer port and document recovery steps before returning it to service.
  2. Validate alternate and root port roles and correct the path-cost or topology configuration required for a usable backup path.
  3. Select the correct root-protection or loop-protection mechanism for the actual superior-BPDU or lost-BPDU threat and validate its triggered state.
  4. Align the MST region name, revision and VLAN-to-instance mapping across members, then verify inter-region boundaries where intentional.

Correct answer: D

Explanation of each choice

A.

The other action is relevant when A provider edge customer handoff occasionally introduces an unapproved switch and the operator wants the interface to fail safely if BPDUs appear. The current case instead requires: Align the MST region name, revision and VLAN-to-instance mapping across members, then verify inter-region boundaries where intentional. The distinction is: A shared VLAN number is insufficient to join the same MST region if the region configuration and digest differ.

B.

That would address a separate configuration fault: A backup link remains discarding in a redundant topology and an operator assumes that discarding always means the link failed. This stem identifies a different cause, corrected by: Align the MST region name, revision and VLAN-to-instance mapping across members, then verify inter-region boundaries where intentional.

C.

This action may apply to a different problem, for example: A blocked redundant path becomes vulnerable to unidirectional failure when expected BPDUs stop, allowing accidental forwarding of both halves of a loop. It does not repair the stated failure boundary. The case-specific reason is: A shared VLAN number is insufficient to join the same MST region if the region configuration and digest differ.

D.

Align the MST region name, revision and VLAN-to-instance mapping across members, then verify inter-region boundaries where intentional. The case-specific reason is: A shared VLAN number is insufficient to join the same MST region if the region configuration and digest differ. A direct acceptance test is: MST region members report compatible configuration identity and instance-specific root/port roles align with the VLAN design.

Question 537

After Stonebridge Hospitality applies its proposed fix to this problem — A provider partitions VLANs across MST instances but one participating switch uses another configuration digest, producing unexpected root decisions. — which observation best proves the specific failure has been resolved?

  1. The target VLAN has the intended loop-free forwarding tree while unaffected VLANs retain their existing paths.
  2. The edge port remains usable for ordinary hosts but an unexpected BPDU triggers the configured protective action and recorded alert.
  3. MST region members report compatible configuration identity and instance-specific root/port roles align with the VLAN design.
  4. A superior BPDU on a protected downstream role is prevented from taking over the root, or a lost-BPDU alternate path stays safely blocked per the chosen guard.

Correct answer: C

Explanation of each choice

A.

The observation confirms a different component's behavior. Its source context is: A team assumes a single spanning-tree state applies to all VLANs but Junos VSTP shows a blocked uplink for only one customer VLAN. In this case the success criterion is: MST region members report compatible configuration identity and instance-specific root/port roles align with the VLAN design.

B.

That check proves something else, such as: A user access port suddenly receives bridge protocol data units from an unmanaged switch and risks forming an unauthorized transit path. It could pass while the stated problem remains. The targeted evidence here is: MST region members report compatible configuration identity and instance-specific root/port roles align with the VLAN design.

C.

MST region members report compatible configuration identity and instance-specific root/port roles align with the VLAN design. A shared VLAN number is insufficient to join the same MST region if the region configuration and digest differ.

D.

The observation confirms a different component's behavior. Its source context is: A network uplink receives superior BPDUs from an unexpected downstream customer bridge and the primary spanning-tree root changes. In this case the success criterion is: MST region members report compatible configuration identity and instance-specific root/port roles align with the VLAN design.

Question 538

An architecture review at Stonebridge Hospitality examines the following symptom: A provider partitions VLANs across MST instances but one participating switch uses another configuration digest, producing unexpected root decisions. What Junos or protocol mechanism is most directly responsible?

  1. BPDU protection guards edge ports against unexpected bridge participation, unlike root protection which guards the root role in an existing spanning-tree topology.
  2. MSTP maps multiple VLANs to spanning-tree instances, and consistent region configuration is required for shared internal operation.
  3. Root protection prevents unexpected downstream superior root claims; loop protection keeps a port from wrongly forwarding when expected BPDUs disappear.
  4. RSTP edge-port treatment shortens convergence for a host attachment but must not be applied to a link that connects another bridge.

Correct answer: B

Explanation of each choice

A.

This explains a separate protocol behavior: A provider edge customer handoff occasionally introduces an unapproved switch and the operator wants the interface to fail safely if BPDUs appear. In the current facts, the controlling mechanism is: MSTP maps multiple VLANs to spanning-tree instances, and consistent region configuration is required for shared internal operation.

B.

MSTP maps multiple VLANs to spanning-tree instances, and consistent region configuration is required for shared internal operation. The key distinction is: A shared VLAN number is insufficient to join the same MST region if the region configuration and digest differ. Accordingly the remedy is: Align the MST region name, revision and VLAN-to-instance mapping across members, then verify inter-region boundaries where intentional.

C.

That principle belongs to a different service stage: A blocked redundant path becomes vulnerable to unidirectional failure when expected BPDUs stop, allowing accidental forwarding of both halves of a loop. The directly relevant mechanism is: MSTP maps multiple VLANs to spanning-tree instances, and consistent region configuration is required for shared internal operation.

D.

This explains a separate protocol behavior: A host access interface takes too long to forward after a link flap because it is treated as a non-edge spanning-tree segment. In the current facts, the controlling mechanism is: MSTP maps multiple VLANs to spanning-tree instances, and consistent region configuration is required for shared internal operation.

Question 539

The team at Stonebridge Hospitality defers a fix for this condition: A provider partitions VLANs across MST instances but one participating switch uses another configuration digest, producing unexpected root decisions. What failure is most likely if no targeted control is applied?

  1. Mislabeling a switch-to-switch link as edge can permit a transient loop, while no edge setting causes avoidable endpoint startup delay.
  2. An unintended root can steer traffic across fragile customer links and cause avoidable topology churn.
  3. Unexpected region boundaries can alter per-instance forwarding or block paths that the design expected to carry traffic.
  4. Forcing every redundant link to forward creates loops; an invalid alternate can instead leave the site disconnected on failover.

Correct answer: C

Explanation of each choice

A.

The concern could occur elsewhere when A server-only switchport repeatedly transitions through unnecessary topology states when the connected endpoint restarts. For the stated scenario, the immediate risk is: Unexpected region boundaries can alter per-instance forwarding or block paths that the design expected to carry traffic.

B.

The concern could occur elsewhere when A newly connected low-end switch becomes the spanning-tree root after a topology change, routing Ethernet traffic along an inefficient path. For the stated scenario, the immediate risk is: Unexpected region boundaries can alter per-instance forwarding or block paths that the design expected to carry traffic.

C.

Unexpected region boundaries can alter per-instance forwarding or block paths that the design expected to carry traffic. The direct mitigation is: Align the MST region name, revision and VLAN-to-instance mapping across members, then verify inter-region boundaries where intentional.

D.

It is a risk in another topology or protocol state: A backup link remains discarding in a redundant topology and an operator assumes that discarding always means the link failed. Here the most direct failure path is: Unexpected region boundaries can alter per-instance forwarding or block paths that the design expected to carry traffic.

Question 540

During provider troubleshooting at Stonebridge Hospitality, this symptom is observed: A provider partitions VLANs across MST instances but one participating switch uses another configuration digest, producing unexpected root decisions. Which targeted inspection should precede remediation?

  1. Inspect whether the port is a true edge, count inbound BPDUs and verify the intended BPDU-protection action on that interface.
  2. Compare MST region name, revision, VLAN mappings and instance-specific BPDU/root data across the connected switches.
  3. Check the actual neighbor device, BPDU observations and interface spanning-tree edge/role state before changing port behavior.
  4. Inspect STP/RSTP role, state, path cost and BPDU information on both uplinks during normal and failure tests.

Correct answer: B

Explanation of each choice

A.

The check diagnoses a different layer of service. Its source issue is: A provider edge customer handoff occasionally introduces an unapproved switch and the operator wants the interface to fail safely if BPDUs appear. The relevant initial check is: Compare MST region name, revision, VLAN mappings and instance-specific BPDU/root data across the connected switches.

B.

Compare MST region name, revision, VLAN mappings and instance-specific BPDU/root data across the connected switches. A shared VLAN number is insufficient to join the same MST region if the region configuration and digest differ.

C.

That evidence could be normal while the reported defect persists. It is aimed at: A server-only switchport repeatedly transitions through unnecessary topology states when the connected endpoint restarts. Instead inspect: Compare MST region name, revision, VLAN mappings and instance-specific BPDU/root data across the connected switches.

D.

The check diagnoses a different layer of service. Its source issue is: A backup link remains discarding in a redundant topology and an operator assumes that discarding always means the link failed. The relevant initial check is: Compare MST region name, revision, VLAN mappings and instance-specific BPDU/root data across the connected switches.

Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests

SPECIAL OFFER: GET 10% OFF
This is ONE TIME OFFER

You save
10%

Enter Your Email Address to Receive Your 10% Off Discount Code

SPECIAL OFFER: GET 10% OFF

You save
10%

Use Discount Code:

A confirmation link was sent to your e-mail.

Please check your mailbox for a message from support@examlabs.com and follow the directions.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your email address below to get started with our interactive software demo of your free trial.

  • Realistic exam simulation and exam editor with preview functions
  • Whole exam in a single file with several different question types
  • Customizable exam-taking mode & detailed score reports