JN0-650 Premium File
- 107 Questions & Answers
- Last Update: Nov 8, 2026
A campus switch has high MAC move counts during bursts and the upstream team suspects a Layer 2 loop rather than a routing failure. The proposed correction is: Inspect Ethernet MAC learning/move logs and spanning-tree port changes on the implicated VLANs. Which observation MOST directly confirms this fault is resolved?
MAC move activity stops after the loop path is eliminated and the STP topology stabilizes. This is the direct acceptance evidence for the observed failure: A campus switch has high MAC move counts during bursts and the upstream team suspects a Layer 2 loop rather than a routing failure. The mechanism being validated is: Rapid source-MAC moves among ports can indicate an unstable bridged topology.
The alternate port shows a deliberate discarding role while the active tree remains connected. That would validate a different condition: A redundant L2 link is unexpectedly blocked and engineers believe it indicates a physical error rather than spanning-tree loop prevention. The decisive check for the current issue is: MAC move activity stops after the loop path is eliminated and the STP topology stabilizes.
The workstation port enters forwarding promptly without creating transit-device bridging loops. That would validate a different condition: An edge desk port is treated as a transit switch link and waits for STP convergence every time a workstation reconnects. The decisive check for the current issue is: MAC move activity stops after the loop path is eliminated and the STP topology stabilizes.
The topology forwards without duplicate broadcast replication or unstable MAC tables. That would validate a different condition: A switched campus has more than one active uplink and staff remove STP protection to recover bandwidth after a topology change. The decisive check for the current issue is: MAC move activity stops after the loop path is eliminated and the STP topology stabilizes.
A Junos engineer proposes this response: Inspect Ethernet MAC learning/move logs and spanning-tree port changes on the implicated VLANs. The situation is: A campus switch has high MAC move counts during bursts and the upstream team suspects a Layer 2 loop rather than a routing failure. Which technical principle BEST justifies the response?
Rapid source-MAC moves among ports can indicate an unstable bridged topology. This is the controlling mechanism in the specific case: A campus switch has high MAC move counts during bursts and the upstream team suspects a Layer 2 loop rather than a routing failure. It predicts the acceptance result: MAC move activity stops after the loop path is eliminated and the STP topology stabilizes.
Spanning tree blocks redundant Layer 2 paths to avoid forwarding loops. This principle explains a separate situation: A redundant L2 link is unexpectedly blocked and engineers believe it indicates a physical error rather than spanning-tree loop prevention. For this issue the relevant mechanism is: Rapid source-MAC moves among ports can indicate an unstable bridged topology.
Edge-port designation avoids normal network-bridge convergence assumptions for host ports. This principle explains a separate situation: An edge desk port is treated as a transit switch link and waits for STP convergence every time a workstation reconnects. For this issue the relevant mechanism is: Rapid source-MAC moves among ports can indicate an unstable bridged topology.
Independent redundant Layer 2 links require loop prevention or managed link aggregation. This principle explains a separate situation: A switched campus has more than one active uplink and staff remove STP protection to recover bandwidth after a topology change. For this issue the relevant mechanism is: Rapid source-MAC moves among ports can indicate an unstable bridged topology.
A campus switch has high MAC move counts during bursts and the upstream team suspects a Layer 2 loop rather than a routing failure. If the team bypasses or fails to implement the targeted correction (Inspect Ethernet MAC learning/move logs and spanning-tree port changes on the implicated VLANs.), which direct operational risk or residual exposure is MOST relevant?
Adding more VLAN trunks before eliminating a loop may amplify a broadcast storm. This is the consequence linked to the observed situation: A campus switch has high MAC move counts during bursts and the upstream team suspects a Layer 2 loop rather than a routing failure. It is prevented by: Inspect Ethernet MAC learning/move logs and spanning-tree port changes on the implicated VLANs. The underlying reason is: Rapid source-MAC moves among ports can indicate an unstable bridged topology.
Forcing all parallel bridging links to forward can create broadcast storms and MAC flapping. This risk belongs to a different operational problem: A redundant L2 link is unexpectedly blocked and engineers believe it indicates a physical error rather than spanning-tree loop prevention. The stated condition instead exposes this direct risk: Adding more VLAN trunks before eliminating a loop may amplify a broadcast storm. The appropriate mitigation is: Inspect Ethernet MAC learning/move logs and spanning-tree port changes on the implicated VLANs.
Marking actual switch-to-switch links as edge can weaken topology change safeguards. This risk belongs to a different operational problem: An edge desk port is treated as a transit switch link and waits for STP convergence every time a workstation reconnects. The stated condition instead exposes this direct risk: Adding more VLAN trunks before eliminating a loop may amplify a broadcast storm. The appropriate mitigation is: Inspect Ethernet MAC learning/move logs and spanning-tree port changes on the implicated VLANs.
An overly broad match rule can misclassify unrelated access traffic into the wrong VLAN. This risk belongs to a different operational problem: An enterprise needs to place frames into different VLANs according to ingress ACL-like match criteria rather than the normal static port membership. The stated condition instead exposes this direct risk: Adding more VLAN trunks before eliminating a loop may amplify a broadcast storm. The appropriate mitigation is: Inspect Ethernet MAC learning/move logs and spanning-tree port changes on the implicated VLANs.
A VLAN should cross an EX access-to-distribution trunk but remains absent from forwarding because it was not allowed on the uplink. Which targeted engineering change is MOST directly justified by the observed evidence?
Authorize the needed VLAN on the correct supported trunk without opening unrelated VLANs. This change specifically addresses the reported evidence: A VLAN should cross an EX access-to-distribution trunk but remains absent from forwarding because it was not allowed on the uplink. The relevant protocol mechanism is: An Ethernet trunk forwards only VLAN memberships configured or registered as eligible. A decisive acceptance test would be: The trunk carries tagged frames for that VLAN and local MAC learning resumes.
Put the intended VLAN and MVRP participation on the supported trunk interfaces. This is a valid solution to a different Junos situation: MVRP is enabled between two switches but a new VLAN is advertised only on an access port that is not a trunk member. It does not directly correct the specific failure evidence here: A VLAN should cross an EX access-to-distribution trunk but remains absent from forwarding because it was not allowed on the uplink. The required targeted change is: Authorize the needed VLAN on the correct supported trunk without opening unrelated VLANs.
Enable supported MVRP dynamic VLAN registration on the participating trunks after verifying platform support. This is a valid solution to a different Junos situation: A switch trunk intermittently drops newly defined tenant VLANs because each distribution switch has a static VLAN allowlist and no registration updates. It does not directly correct the specific failure evidence here: A VLAN should cross an EX access-to-distribution trunk but remains absent from forwarding because it was not allowed on the uplink. The required targeted change is: Authorize the needed VLAN on the correct supported trunk without opening unrelated VLANs.
Deploy supported VSTP for the specified interoperable VLANs and confirm device scale limits. This is a valid solution to a different Junos situation: A network interconnects switches that require one separate spanning-tree instance for each VLAN instead of the grouped MSTP model. It does not directly correct the specific failure evidence here: A VLAN should cross an EX access-to-distribution trunk but remains absent from forwarding because it was not allowed on the uplink. The required targeted change is: Authorize the needed VLAN on the correct supported trunk without opening unrelated VLANs.
A VLAN should cross an EX access-to-distribution trunk but remains absent from forwarding because it was not allowed on the uplink. The proposed correction is: Authorize the needed VLAN on the correct supported trunk without opening unrelated VLANs. Which observation MOST directly confirms this fault is resolved?
The trunk carries tagged frames for that VLAN and local MAC learning resumes. This is the direct acceptance evidence for the observed failure: A VLAN should cross an EX access-to-distribution trunk but remains absent from forwarding because it was not allowed on the uplink. The mechanism being validated is: An Ethernet trunk forwards only VLAN memberships configured or registered as eligible.
The VLAN registration appears across the neighboring trunk while access-port delivery remains correct. That would validate a different condition: MVRP is enabled between two switches but a new VLAN is advertised only on an access port that is not a trunk member. The decisive check for the current issue is: The trunk carries tagged frames for that VLAN and local MAC learning resumes.
The new VLAN is advertised and installed on participating transport trunks without manual additions. That would validate a different condition: A switch trunk intermittently drops newly defined tenant VLANs because each distribution switch has a static VLAN allowlist and no registration updates. The decisive check for the current issue is: The trunk carries tagged frames for that VLAN and local MAC learning resumes.
VLAN-specific spanning-tree root and port states match the desired topology independently. That would validate a different condition: A network interconnects switches that require one separate spanning-tree instance for each VLAN instead of the grouped MSTP model. The decisive check for the current issue is: The trunk carries tagged frames for that VLAN and local MAC learning resumes.
A Junos engineer proposes this response: Authorize the needed VLAN on the correct supported trunk without opening unrelated VLANs. The situation is: A VLAN should cross an EX access-to-distribution trunk but remains absent from forwarding because it was not allowed on the uplink. Which technical principle BEST justifies the response?
An Ethernet trunk forwards only VLAN memberships configured or registered as eligible. This is the controlling mechanism in the specific case: A VLAN should cross an EX access-to-distribution trunk but remains absent from forwarding because it was not allowed on the uplink. It predicts the acceptance result: The trunk carries tagged frames for that VLAN and local MAC learning resumes.
MVRP exchanges VLAN registration information on trunk links rather than arbitrary access ports. This principle explains a separate situation: MVRP is enabled between two switches but a new VLAN is advertised only on an access port that is not a trunk member. For this issue the relevant mechanism is: An Ethernet trunk forwards only VLAN memberships configured or registered as eligible.
MVRP dynamically registers active VLAN memberships on supported trunk links. This principle explains a separate situation: A switch trunk intermittently drops newly defined tenant VLANs because each distribution switch has a static VLAN allowlist and no registration updates. For this issue the relevant mechanism is: An Ethernet trunk forwards only VLAN memberships configured or registered as eligible.
VSTP maintains a separate spanning-tree instance for each VLAN. This principle explains a separate situation: A network interconnects switches that require one separate spanning-tree instance for each VLAN instead of the grouped MSTP model. For this issue the relevant mechanism is: An Ethernet trunk forwards only VLAN memberships configured or registered as eligible.
A VLAN should cross an EX access-to-distribution trunk but remains absent from forwarding because it was not allowed on the uplink. If the team bypasses or fails to implement the targeted correction (Authorize the needed VLAN on the correct supported trunk without opening unrelated VLANs.), which direct operational risk or residual exposure is MOST relevant?
Opening every VLAN to fix one missing membership expands an unnecessary Layer 2 failure domain. This is the consequence linked to the observed situation: A VLAN should cross an EX access-to-distribution trunk but remains absent from forwarding because it was not allowed on the uplink. It is prevented by: Authorize the needed VLAN on the correct supported trunk without opening unrelated VLANs. The underlying reason is: An Ethernet trunk forwards only VLAN memberships configured or registered as eligible.
Enabling MVRP on access-only ports does not provide the intended trunk registration process. This risk belongs to a different operational problem: MVRP is enabled between two switches but a new VLAN is advertised only on an access port that is not a trunk member. The stated condition instead exposes this direct risk: Opening every VLAN to fix one missing membership expands an unnecessary Layer 2 failure domain. The appropriate mitigation is: Authorize the needed VLAN on the correct supported trunk without opening unrelated VLANs.
Assuming a VLAN can traverse every trunk without registration can strand newly created segments. This risk belongs to a different operational problem: A switch trunk intermittently drops newly defined tenant VLANs because each distribution switch has a static VLAN allowlist and no registration updates. The stated condition instead exposes this direct risk: Opening every VLAN to fix one missing membership expands an unnecessary Layer 2 failure domain. The appropriate mitigation is: Authorize the needed VLAN on the correct supported trunk without opening unrelated VLANs.
Using MSTP instance grouping when separate interoperability is required can change traffic paths. This risk belongs to a different operational problem: A network interconnects switches that require one separate spanning-tree instance for each VLAN instead of the grouped MSTP model. The stated condition instead exposes this direct risk: Opening every VLAN to fix one missing membership expands an unnecessary Layer 2 failure domain. The appropriate mitigation is: Authorize the needed VLAN on the correct supported trunk without opening unrelated VLANs.
A switched campus has more than one active uplink and staff remove STP protection to recover bandwidth after a topology change. Which targeted engineering change is MOST directly justified by the observed evidence?
Restore a coherent STP or aggregated-link design instead of forwarding two independent looped bridges. This change specifically addresses the reported evidence: A switched campus has more than one active uplink and staff remove STP protection to recover bandwidth after a topology change. The relevant protocol mechanism is: Independent redundant Layer 2 links require loop prevention or managed link aggregation. A decisive acceptance test would be: The topology forwards without duplicate broadcast replication or unstable MAC tables.
Enable supported Layer 2 protocol tunneling for the designated customer control PDU type. This is a valid solution to a different Junos situation: Two customer sites must exchange spanning-tree BPDUs over a provider Ethernet service without letting those BPDUs alter the provider's own STP topology. It does not directly correct the specific failure evidence here: A switched campus has more than one active uplink and staff remove STP protection to recover bandwidth after a topology change. The required targeted change is: Restore a coherent STP or aggregated-link design instead of forwarding two independent looped bridges.
Inspect the port's selected STP role, root cost and designated bridge information for its VLAN/instance. This is a valid solution to a different Junos situation: A redundant L2 link is unexpectedly blocked and engineers believe it indicates a physical error rather than spanning-tree loop prevention. It does not directly correct the specific failure evidence here: A switched campus has more than one active uplink and staff remove STP protection to recover bandwidth after a topology change. The required targeted change is: Restore a coherent STP or aggregated-link design instead of forwarding two independent looped bridges.
Use supported Q-in-Q service VLAN tags to separate the overlapping customer VLAN identifiers. This is a valid solution to a different Junos situation: A service provider carries two customers using internal VLAN 100 across the same aggregation trunk and must keep their traffic isolated. It does not directly correct the specific failure evidence here: A switched campus has more than one active uplink and staff remove STP protection to recover bandwidth after a topology change. The required targeted change is: Restore a coherent STP or aggregated-link design instead of forwarding two independent looped bridges.
A switched campus has more than one active uplink and staff remove STP protection to recover bandwidth after a topology change. The proposed correction is: Restore a coherent STP or aggregated-link design instead of forwarding two independent looped bridges. Which observation MOST directly confirms this fault is resolved?
The topology forwards without duplicate broadcast replication or unstable MAC tables. This is the direct acceptance evidence for the observed failure: A switched campus has more than one active uplink and staff remove STP protection to recover bandwidth after a topology change. The mechanism being validated is: Independent redundant Layer 2 links require loop prevention or managed link aggregation.
Customer BPDUs reach the remote customer end, and provider STP remains isolated from them. That would validate a different condition: Two customer sites must exchange spanning-tree BPDUs over a provider Ethernet service without letting those BPDUs alter the provider's own STP topology. The decisive check for the current issue is: The topology forwards without duplicate broadcast replication or unstable MAC tables.
The alternate port shows a deliberate discarding role while the active tree remains connected. That would validate a different condition: A redundant L2 link is unexpectedly blocked and engineers believe it indicates a physical error rather than spanning-tree loop prevention. The decisive check for the current issue is: The topology forwards without duplicate broadcast replication or unstable MAC tables.
Captures show distinct outer S-VLAN tags while preserving each customer's inner C-VLAN 100. That would validate a different condition: A service provider carries two customers using internal VLAN 100 across the same aggregation trunk and must keep their traffic isolated. The decisive check for the current issue is: The topology forwards without duplicate broadcast replication or unstable MAC tables.
A Junos engineer proposes this response: Restore a coherent STP or aggregated-link design instead of forwarding two independent looped bridges. The situation is: A switched campus has more than one active uplink and staff remove STP protection to recover bandwidth after a topology change. Which technical principle BEST justifies the response?
Independent redundant Layer 2 links require loop prevention or managed link aggregation. This is the controlling mechanism in the specific case: A switched campus has more than one active uplink and staff remove STP protection to recover bandwidth after a topology change. It predicts the acceptance result: The topology forwards without duplicate broadcast replication or unstable MAC tables.
L2PT carries selected customer Layer 2 control packets transparently across a transport domain. This principle explains a separate situation: Two customer sites must exchange spanning-tree BPDUs over a provider Ethernet service without letting those BPDUs alter the provider's own STP topology. For this issue the relevant mechanism is: Independent redundant Layer 2 links require loop prevention or managed link aggregation.
Spanning tree blocks redundant Layer 2 paths to avoid forwarding loops. This principle explains a separate situation: A redundant L2 link is unexpectedly blocked and engineers believe it indicates a physical error rather than spanning-tree loop prevention. For this issue the relevant mechanism is: Independent redundant Layer 2 links require loop prevention or managed link aggregation.
IEEE 802.1ad VLAN stacking adds an outer provider tag around the original customer VLAN tag. This principle explains a separate situation: A service provider carries two customers using internal VLAN 100 across the same aggregation trunk and must keep their traffic isolated. For this issue the relevant mechanism is: Independent redundant Layer 2 links require loop prevention or managed link aggregation.
A switched campus has more than one active uplink and staff remove STP protection to recover bandwidth after a topology change. If the team bypasses or fails to implement the targeted correction (Restore a coherent STP or aggregated-link design instead of forwarding two independent looped bridges.), which direct operational risk or residual exposure is MOST relevant?
Disabling loop protection can turn a minor outage into a broadcast storm across VLANs. This is the consequence linked to the observed situation: A switched campus has more than one active uplink and staff remove STP protection to recover bandwidth after a topology change. It is prevented by: Restore a coherent STP or aggregated-link design instead of forwarding two independent looped bridges. The underlying reason is: Independent redundant Layer 2 links require loop prevention or managed link aggregation.
Processing customer BPDUs as local provider control traffic can affect the provider spanning tree. This risk belongs to a different operational problem: Two customer sites must exchange spanning-tree BPDUs over a provider Ethernet service without letting those BPDUs alter the provider's own STP topology. The stated condition instead exposes this direct risk: Disabling loop protection can turn a minor outage into a broadcast storm across VLANs. The appropriate mitigation is: Restore a coherent STP or aggregated-link design instead of forwarding two independent looped bridges.
Forcing all parallel bridging links to forward can create broadcast storms and MAC flapping. This risk belongs to a different operational problem: A redundant L2 link is unexpectedly blocked and engineers believe it indicates a physical error rather than spanning-tree loop prevention. The stated condition instead exposes this direct risk: Disabling loop protection can turn a minor outage into a broadcast storm across VLANs. The appropriate mitigation is: Restore a coherent STP or aggregated-link design instead of forwarding two independent looped bridges.
Failing to remove the service tag can prevent the customer switch accepting expected VLAN frames. This risk belongs to a different operational problem: A double-tagged customer Ethernet frame arrives at the far edge of a Q-in-Q service with its provider tag still attached. The stated condition instead exposes this direct risk: Disabling loop protection can turn a minor outage into a broadcast storm across VLANs. The appropriate mitigation is: Restore a coherent STP or aggregated-link design instead of forwarding two independent looped bridges.
Please check your mailbox for a message from support@examlabs.com and follow the directions.