JN0-650 Premium File
- 107 Questions & Answers
- Last Update: Nov 8, 2026
A handset reboots whenever its camera accessory activates, and the switch logs PoE power-class events. The proposed correction is: Check LLDP-MED power negotiation and the switch's actual class and power budget for that device. Which observation MOST directly confirms this fault is resolved?
The handset remains powered when accessories activate and operational counters show adequate allocation. This is the direct acceptance evidence for the observed failure: A handset reboots whenever its camera accessory activates, and the switch logs PoE power-class events. The mechanism being validated is: PoE class and negotiated power behavior can affect high-demand IP phones.
The port negotiates sufficient PoE power and the handset boots without overload alarms. That would validate a different condition: An IP phone powered by PoE fails to boot on an access switch because the interface has no available power budget after several new devices were connected. The decisive check for the current issue is: The handset remains powered when accessories activate and operational counters show adequate allocation.
The phone marks the expected class and the ingress switch counters place RTP in the intended queue. That would validate a different condition: A call-quality test shows voice media entering a best-effort queue even though the handset is marked with a supported 802.1p priority. The decisive check for the current issue is: The handset remains powered when accessories activate and operational counters show adequate allocation.
Voice frames on the advertised VLAN are accepted and the phone reaches its call server. That would validate a different condition: A configured LLDP-MED phone receives a voice VLAN ID that is absent from allowed VLAN membership on its switch port. The decisive check for the current issue is: The handset remains powered when accessories activate and operational counters show adequate allocation.
A Junos engineer proposes this response: Check LLDP-MED power negotiation and the switch's actual class and power budget for that device. The situation is: A handset reboots whenever its camera accessory activates, and the switch logs PoE power-class events. Which technical principle BEST justifies the response?
PoE class and negotiated power behavior can affect high-demand IP phones. This is the controlling mechanism in the specific case: A handset reboots whenever its camera accessory activates, and the switch logs PoE power-class events. It predicts the acceptance result: The handset remains powered when accessories activate and operational counters show adequate allocation.
PoE power sourcing equipment must have enough allocatable watts for each powered device. This principle explains a separate situation: An IP phone powered by PoE fails to boot on an access switch because the interface has no available power budget after several new devices were connected. For this issue the relevant mechanism is: PoE class and negotiated power behavior can affect high-demand IP phones.
LLDP-MED advertises endpoint priority policy while Junos CoS handles classification and scheduling. This principle explains a separate situation: A call-quality test shows voice media entering a best-effort queue even though the handset is marked with a supported 802.1p priority. For this issue the relevant mechanism is: PoE class and negotiated power behavior can affect high-demand IP phones.
LLDP-MED policy distribution and actual switch forwarding VLAN membership must agree. This principle explains a separate situation: A configured LLDP-MED phone receives a voice VLAN ID that is absent from allowed VLAN membership on its switch port. For this issue the relevant mechanism is: PoE class and negotiated power behavior can affect high-demand IP phones.
A handset reboots whenever its camera accessory activates, and the switch logs PoE power-class events. If the team bypasses or fails to implement the targeted correction (Check LLDP-MED power negotiation and the switch's actual class and power budget for that device.), which direct operational risk or residual exposure is MOST relevant?
Ignoring power-class transitions can produce intermittent phone resets during feature use. This is the consequence linked to the observed situation: A handset reboots whenever its camera accessory activates, and the switch logs PoE power-class events. It is prevented by: Check LLDP-MED power negotiation and the switch's actual class and power budget for that device. The underlying reason is: PoE class and negotiated power behavior can affect high-demand IP phones.
A correct network VLAN cannot compensate for an insufficient physical PoE power budget. This risk belongs to a different operational problem: An IP phone powered by PoE fails to boot on an access switch because the interface has no available power budget after several new devices were connected. The stated condition instead exposes this direct risk: Ignoring power-class transitions can produce intermittent phone resets during feature use. The appropriate mitigation is: Check LLDP-MED power negotiation and the switch's actual class and power budget for that device.
A phone marking that is not recognized by the switch can still be forwarded as best effort. This risk belongs to a different operational problem: A call-quality test shows voice media entering a best-effort queue even though the handset is marked with a supported 802.1p priority. The stated condition instead exposes this direct risk: Ignoring power-class transitions can produce intermittent phone resets during feature use. The appropriate mitigation is: Check LLDP-MED power negotiation and the switch's actual class and power budget for that device.
Advertising an unusable voice VLAN does not create forwarding connectivity for tagged packets. This risk belongs to a different operational problem: A configured LLDP-MED phone receives a voice VLAN ID that is absent from allowed VLAN membership on its switch port. The stated condition instead exposes this direct risk: Ignoring power-class transitions can produce intermittent phone resets during feature use. The appropriate mitigation is: Check LLDP-MED power negotiation and the switch's actual class and power budget for that device.
A telephone with an external AC adapter works on a port with PoE disabled, yet engineers plan to enable PoE solely for voice service. Which targeted engineering change is MOST directly justified by the observed evidence?
Verify the available external power and focus troubleshooting on the phone's data and voice policy instead. This change specifically addresses the reported evidence: A telephone with an external AC adapter works on a port with PoE disabled, yet engineers plan to enable PoE solely for voice service. The relevant protocol mechanism is: PoE is not required when the endpoint already has a supported external power source. A decisive acceptance test would be: The phone stays powered by its adapter and joins the expected authorized VLAN.
Check power budget, supported PoE class and per-port power allocation before modifying voice VLAN tags. This is a valid solution to a different Junos situation: An IP phone powered by PoE fails to boot on an access switch because the interface has no available power budget after several new devices were connected. It does not directly correct the specific failure evidence here: A telephone with an external AC adapter works on a port with PoE disabled, yet engineers plan to enable PoE solely for voice service. The required targeted change is: Verify the available external power and focus troubleshooting on the phone's data and voice policy instead.
Enable supported LLDP-MED network-policy advertisement on the phone-facing EX interface. This is a valid solution to a different Junos situation: A campus phone learns no voice network policy while basic LLDP neighbor discovery succeeds. It does not directly correct the specific failure evidence here: A telephone with an external AC adapter works on a port with PoE disabled, yet engineers plan to enable PoE solely for voice service. The required targeted change is: Verify the available external power and focus troubleshooting on the phone's data and voice policy instead.
Verify the LLDP-MED network-policy VLAN tag advertisement and phone tagging capability. This is a valid solution to a different Junos situation: An IP phone sends untagged voice packets despite a switch VLAN configuration that requires 802.1Q tagged voice frames. It does not directly correct the specific failure evidence here: A telephone with an external AC adapter works on a port with PoE disabled, yet engineers plan to enable PoE solely for voice service. The required targeted change is: Verify the available external power and focus troubleshooting on the phone's data and voice policy instead.
A telephone with an external AC adapter works on a port with PoE disabled, yet engineers plan to enable PoE solely for voice service. The proposed correction is: Verify the available external power and focus troubleshooting on the phone's data and voice policy instead. Which observation MOST directly confirms this fault is resolved?
The phone stays powered by its adapter and joins the expected authorized VLAN. This is the direct acceptance evidence for the observed failure: A telephone with an external AC adapter works on a port with PoE disabled, yet engineers plan to enable PoE solely for voice service. The mechanism being validated is: PoE is not required when the endpoint already has a supported external power source.
The port negotiates sufficient PoE power and the handset boots without overload alarms. That would validate a different condition: An IP phone powered by PoE fails to boot on an access switch because the interface has no available power budget after several new devices were connected. The decisive check for the current issue is: The phone stays powered by its adapter and joins the expected authorized VLAN.
LLDP-MED detail shows the intended voice application VLAN and priority settings advertised. That would validate a different condition: A campus phone learns no voice network policy while basic LLDP neighbor discovery succeeds. The decisive check for the current issue is: The phone stays powered by its adapter and joins the expected authorized VLAN.
A capture shows the handset using the intended voice VLAN tag for media and signaling. That would validate a different condition: An IP phone sends untagged voice packets despite a switch VLAN configuration that requires 802.1Q tagged voice frames. The decisive check for the current issue is: The phone stays powered by its adapter and joins the expected authorized VLAN.
A Junos engineer proposes this response: Verify the available external power and focus troubleshooting on the phone's data and voice policy instead. The situation is: A telephone with an external AC adapter works on a port with PoE disabled, yet engineers plan to enable PoE solely for voice service. Which technical principle BEST justifies the response?
PoE is not required when the endpoint already has a supported external power source. This is the controlling mechanism in the specific case: A telephone with an external AC adapter works on a port with PoE disabled, yet engineers plan to enable PoE solely for voice service. It predicts the acceptance result: The phone stays powered by its adapter and joins the expected authorized VLAN.
PoE power sourcing equipment must have enough allocatable watts for each powered device. This principle explains a separate situation: An IP phone powered by PoE fails to boot on an access switch because the interface has no available power budget after several new devices were connected. For this issue the relevant mechanism is: PoE is not required when the endpoint already has a supported external power source.
LLDP-MED extends LLDP with endpoint network-policy information for voice deployments. This principle explains a separate situation: A campus phone learns no voice network policy while basic LLDP neighbor discovery succeeds. For this issue the relevant mechanism is: PoE is not required when the endpoint already has a supported external power source.
LLDP-MED can communicate tagged voice VLAN and CoS parameters to compatible phones. This principle explains a separate situation: An IP phone sends untagged voice packets despite a switch VLAN configuration that requires 802.1Q tagged voice frames. For this issue the relevant mechanism is: PoE is not required when the endpoint already has a supported external power source.
A telephone with an external AC adapter works on a port with PoE disabled, yet engineers plan to enable PoE solely for voice service. If the team bypasses or fails to implement the targeted correction (Verify the available external power and focus troubleshooting on the phone's data and voice policy instead.), which direct operational risk or residual exposure is MOST relevant?
Misidentifying the phone power source can waste remediation time on a nonissue. This is the consequence linked to the observed situation: A telephone with an external AC adapter works on a port with PoE disabled, yet engineers plan to enable PoE solely for voice service. It is prevented by: Verify the available external power and focus troubleshooting on the phone's data and voice policy instead. The underlying reason is: PoE is not required when the endpoint already has a supported external power source.
A correct network VLAN cannot compensate for an insufficient physical PoE power budget. This risk belongs to a different operational problem: An IP phone powered by PoE fails to boot on an access switch because the interface has no available power budget after several new devices were connected. The stated condition instead exposes this direct risk: Misidentifying the phone power source can waste remediation time on a nonissue. The appropriate mitigation is: Verify the available external power and focus troubleshooting on the phone's data and voice policy instead.
Plain LLDP neighbor discovery alone does not guarantee that a voice VLAN policy is advertised. This risk belongs to a different operational problem: A campus phone learns no voice network policy while basic LLDP neighbor discovery succeeds. The stated condition instead exposes this direct risk: Misidentifying the phone power source can waste remediation time on a nonissue. The appropriate mitigation is: Verify the available external power and focus troubleshooting on the phone's data and voice policy instead.
Mismatched tagging between phone and switch can strand voice traffic in the data VLAN. This risk belongs to a different operational problem: An IP phone sends untagged voice packets despite a switch VLAN configuration that requires 802.1Q tagged voice frames. The stated condition instead exposes this direct risk: Misidentifying the phone power source can waste remediation time on a nonissue. The appropriate mitigation is: Verify the available external power and focus troubleshooting on the phone's data and voice policy instead.
A campus phone learns no voice network policy while basic LLDP neighbor discovery succeeds. Which targeted engineering change is MOST directly justified by the observed evidence?
Enable supported LLDP-MED network-policy advertisement on the phone-facing EX interface. This change specifically addresses the reported evidence: A campus phone learns no voice network policy while basic LLDP neighbor discovery succeeds. The relevant protocol mechanism is: LLDP-MED extends LLDP with endpoint network-policy information for voice deployments. A decisive acceptance test would be: LLDP-MED detail shows the intended voice application VLAN and priority settings advertised.
Correct the per-port or site voice network policy rather than changing unrelated PoE wattage. This is a valid solution to a different Junos situation: A corporate handset supports LLDP-MED, but the switch still provides an incorrect voice VLAN after a site migration. It does not directly correct the specific failure evidence here: A campus phone learns no voice network policy while basic LLDP neighbor discovery succeeds. The required targeted change is: Enable supported LLDP-MED network-policy advertisement on the phone-facing EX interface.
Correct the upstream CoS trust or reclassification boundary while retaining accurate phone advertisements. This is a valid solution to a different Junos situation: A switch is advertising LLDP-MED DSCP policy to a phone, but an upstream switch rewrites all marked voice traffic to best effort. It does not directly correct the specific failure evidence here: A campus phone learns no voice network policy while basic LLDP neighbor discovery succeeds. The required targeted change is: Enable supported LLDP-MED network-policy advertisement on the phone-facing EX interface.
Check power budget, supported PoE class and per-port power allocation before modifying voice VLAN tags. This is a valid solution to a different Junos situation: An IP phone powered by PoE fails to boot on an access switch because the interface has no available power budget after several new devices were connected. It does not directly correct the specific failure evidence here: A campus phone learns no voice network policy while basic LLDP neighbor discovery succeeds. The required targeted change is: Enable supported LLDP-MED network-policy advertisement on the phone-facing EX interface.
A campus phone learns no voice network policy while basic LLDP neighbor discovery succeeds. The proposed correction is: Enable supported LLDP-MED network-policy advertisement on the phone-facing EX interface. Which observation MOST directly confirms this fault is resolved?
LLDP-MED detail shows the intended voice application VLAN and priority settings advertised. This is the direct acceptance evidence for the observed failure: A campus phone learns no voice network policy while basic LLDP neighbor discovery succeeds. The mechanism being validated is: LLDP-MED extends LLDP with endpoint network-policy information for voice deployments.
The observed remote chassis and port identifiers match the corrected physical connection. That would validate a different condition: An IP phone receives an LLDP neighbor identity from the wrong switch port after cabling was moved across a patch panel. The decisive check for the current issue is: LLDP-MED detail shows the intended voice application VLAN and priority settings advertised.
The phone marks the expected class and the ingress switch counters place RTP in the intended queue. That would validate a different condition: A call-quality test shows voice media entering a best-effort queue even though the handset is marked with a supported 802.1p priority. The decisive check for the current issue is: LLDP-MED detail shows the intended voice application VLAN and priority settings advertised.
The port negotiates sufficient PoE power and the handset boots without overload alarms. That would validate a different condition: An IP phone powered by PoE fails to boot on an access switch because the interface has no available power budget after several new devices were connected. The decisive check for the current issue is: LLDP-MED detail shows the intended voice application VLAN and priority settings advertised.
A Junos engineer proposes this response: Enable supported LLDP-MED network-policy advertisement on the phone-facing EX interface. The situation is: A campus phone learns no voice network policy while basic LLDP neighbor discovery succeeds. Which technical principle BEST justifies the response?
LLDP-MED extends LLDP with endpoint network-policy information for voice deployments. This is the controlling mechanism in the specific case: A campus phone learns no voice network policy while basic LLDP neighbor discovery succeeds. It predicts the acceptance result: LLDP-MED detail shows the intended voice application VLAN and priority settings advertised.
LLDP-MED can communicate tagged voice VLAN and CoS parameters to compatible phones. This principle explains a separate situation: An IP phone sends untagged voice packets despite a switch VLAN configuration that requires 802.1Q tagged voice frames. For this issue the relevant mechanism is: LLDP-MED extends LLDP with endpoint network-policy information for voice deployments.
LLDP carries neighboring device and port identity for link discovery. This principle explains a separate situation: An IP phone receives an LLDP neighbor identity from the wrong switch port after cabling was moved across a patch panel. For this issue the relevant mechanism is: LLDP-MED extends LLDP with endpoint network-policy information for voice deployments.
Voice VLAN features separate telephony traffic from the data traffic sharing an access link. This principle explains a separate situation: A phone and downstream desktop PC share one physical EX switch port but their traffic must use different voice and data VLANs. For this issue the relevant mechanism is: LLDP-MED extends LLDP with endpoint network-policy information for voice deployments.
A campus phone learns no voice network policy while basic LLDP neighbor discovery succeeds. If the team bypasses or fails to implement the targeted correction (Enable supported LLDP-MED network-policy advertisement on the phone-facing EX interface.), which direct operational risk or residual exposure is MOST relevant?
Plain LLDP neighbor discovery alone does not guarantee that a voice VLAN policy is advertised. This is the consequence linked to the observed situation: A campus phone learns no voice network policy while basic LLDP neighbor discovery succeeds. It is prevented by: Enable supported LLDP-MED network-policy advertisement on the phone-facing EX interface. The underlying reason is: LLDP-MED extends LLDP with endpoint network-policy information for voice deployments.
Mismatched tagging between phone and switch can strand voice traffic in the data VLAN. This risk belongs to a different operational problem: An IP phone sends untagged voice packets despite a switch VLAN configuration that requires 802.1Q tagged voice frames. The stated condition instead exposes this direct risk: Plain LLDP neighbor discovery alone does not guarantee that a voice VLAN policy is advertised. The appropriate mitigation is: Enable supported LLDP-MED network-policy advertisement on the phone-facing EX interface.
Assuming a switch interface label equals the physical handset connection can misdirect repairs. This risk belongs to a different operational problem: An IP phone receives an LLDP neighbor identity from the wrong switch port after cabling was moved across a patch panel. The stated condition instead exposes this direct risk: Plain LLDP neighbor discovery alone does not guarantee that a voice VLAN policy is advertised. The appropriate mitigation is: Enable supported LLDP-MED network-policy advertisement on the phone-facing EX interface.
Placing both devices into one unrestricted VLAN can defeat traffic segregation and security. This risk belongs to a different operational problem: A phone and downstream desktop PC share one physical EX switch port but their traffic must use different voice and data VLANs. The stated condition instead exposes this direct risk: Plain LLDP neighbor discovery alone does not guarantee that a voice VLAN policy is advertised. The appropriate mitigation is: Enable supported LLDP-MED network-policy advertisement on the phone-facing EX interface.
Please check your mailbox for a message from support@examlabs.com and follow the directions.