You save $69.98
300-415 Premium Bundle
- Premium File 480 Questions & Answers
- Last Update: Nov 11, 2026
- Training Course 112 Lectures
- Study Guide 874 Pages
You save $69.98
A Cisco Catalyst SD-WAN deployment engineer is handling this requirement: An MPLS tunnel and internet tunnel are up, yet VoIP MOS drops during bursts of jitter on one path. Which action BEST addresses the situation?
Compare BFD-reported data tunnel quality before recommending transport-dependent application routing. This is the targeted action for the stated case: An MPLS tunnel and internet tunnel are up, yet VoIP MOS drops during bursts of jitter on one path. The specific technical reason is: BFD provides quality metrics that can inform application-aware overlay path selection. Verification should demonstrate: Monitoring identifies the specific TLOC pair with elevated jitter during affected voice calls.
Verify cloud routing and supported virtual Edge or gateway route advertisement to the destination VPC or VNet. This would help with a different network situation: A company uses Cloud OnRamp for IaaS but branch prefixes are missing from the hosted application's routing domain.
Use Cisco Catalyst SD-WAN Manager for configuration deployment, monitoring, and managed device inventory. This would help with a different network situation: A network administrator wants one central interface to deploy configurations and inventory hundreds of Catalyst WAN Edge routers.
Distinguish OMP TLOC advertisements from vRoutes that identify service-side VPN prefixes. This would help with a different network situation: An engineer sees an OMP TLOC route and concludes that it is itself a customer's service-VPN network prefix.
A Cisco Catalyst SD-WAN deployment engineer is handling this requirement: An engineer evaluates a software WAN Edge for public-cloud hosting where a physical branch router cannot be installed. Which action BEST addresses the situation?
Select a supported virtual Edge image and validate the cloud provider's networking requirements. This is the targeted action for the stated case: An engineer evaluates a software WAN Edge for public-cloud hosting where a physical branch router cannot be installed. The specific technical reason is: Cisco virtual WAN Edges can extend encrypted SD-WAN overlay functions into supported cloud infrastructure. Verification should demonstrate: The cloud virtual Edge establishes fabric connections through the expected virtual network interfaces.
Assign and verify appropriate SD-WAN transport colors on each tunnel interface. This would help with a different network situation: A fabric uses MPLS and internet transports and must prevent internet-only endpoints from being mistaken for private MPLS circuits.
Check version-specific feature support and platform compatibility before applying one common design. This would help with a different network situation: A team plans to mix virtual and physical Catalyst WAN Edges and assumes every platform supports identical features.
Select an Edge model and entitlement that meet measured encrypted traffic and feature capacity. This would help with a different network situation: A small branch has encrypted overlay traffic exceeding the proposed device's licensed throughput capacity.
Consider this Catalyst SD-WAN operating scenario: A SaaS performance analyst sees good generic ICMP response to the internet but repeated poor cloud application transactions. Which corrective response most directly meets the requirement?
Check Cloud OnRamp for SaaS application-specific probes and metrics instead of relying only on ping. This is the targeted action for the stated case: A SaaS performance analyst sees good generic ICMP response to the internet but repeated poor cloud application transactions. The specific technical reason is: SaaS application experience telemetry assesses application reachability and performance beyond raw circuit pings. Verification should demonstrate: Application measurements identify service-specific degradation that basic transport reachability misses.
Select an Edge model and entitlement that meet measured encrypted traffic and feature capacity. This would help with a different network situation: A small branch has encrypted overlay traffic exceeding the proposed device's licensed throughput capacity.
Design scoped colocation service insertion and traffic policy matching approved application flows. This would help with a different network situation: A network team must send only approved application categories through a colocation security stack, retaining other traffic on DIA.
Verify cloud routing and supported virtual Edge or gateway route advertisement to the destination VPC or VNet. This would help with a different network situation: A company uses Cloud OnRamp for IaaS but branch prefixes are missing from the hosted application's routing domain.
The team applies this planned Catalyst SD-WAN change: Inspect the Controller's advertised routes and active control policies for the affected site and VPN. The original case is: A Controller has route advertisements but an Edge's OMP route table shows no routes for a particular customer VPN. What observation most directly verifies the intended behavior?
An authorized policy change allows the intended VPN route to be distributed to the Edge. This observable result validates the corrective action: Inspect the Controller's advertised routes and active control policies for the affected site and VPN.
The expected number of acceptable VPN route paths is exchanged without exceeding configured scale. That observation would verify another change: One Edge has an OMP neighbor session that is up, yet route propagation stops after the configured path limit. The expected result instead is: An authorized policy change allows the intended VPN route to be distributed to the Edge.
The route appears remotely in the intended service VPN and never in an unrelated tenant VPN. That observation would verify another change: A headquarters network is learned through BGP but is advertised to remote SD-WAN sites under the wrong VPN ID. The expected result instead is: An authorized policy change allows the intended VPN route to be distributed to the Edge.
The common template remains identical while each Edge receives the correct site-specific BGP peer. That observation would verify another change: One device template is shared by 200 sites, but only the BGP neighbor address should differ per Edge. The expected result instead is: An authorized policy change allows the intended VPN route to be distributed to the Edge.
A Cisco SD-WAN deployment has completed the following step: Correct service VPN membership and centrally restrict which VPN routes are distributed to guest sites. The original case is: A remote branch advertises a private finance prefix into a public guest service VPN by mistake. Which test result provides the strongest evidence that the change succeeded?
Guest routes exclude the finance prefix while authorized finance sites retain reachability. This observable result validates the corrective action: Correct service VPN membership and centrally restrict which VPN routes are distributed to guest sites.
Matched malicious test traffic increments drop counters while legitimate traffic continues. That observation would verify another change: A network engineer needs to drop a malicious traffic class at ingress before it enters the overlay. The expected result instead is: Guest routes exclude the finance prefix while authorized finance sites retain reachability.
The correct second VPN's routes appear after membership and control-policy corrections. That observation would verify another change: A new branch can reach a hub's external service VPN but not a second shared-services VPN. The expected result instead is: Guest routes exclude the finance prefix while authorized finance sites retain reachability.
Branches can access hub services but no direct spoke routing is installed. That observation would verify another change: A company wants branches to reach headquarters servers but forbids direct branch-to-branch sessions. The expected result instead is: Guest routes exclude the finance prefix while authorized finance sites retain reachability.
The team suggests this solution: Inspect service-side multicast group membership, routing prerequisites and overlay replication state. The triggering scenario is: Branch receivers issue IGMP joins but no multicast arrives from a campus source across the overlay. Which underlying SD-WAN behavior BEST explains the response?
Multicast forwarding depends on group membership and compatible routing or replication configuration. This technical mechanism explains why the recommended action works: Inspect service-side multicast group membership, routing prerequisites and overlay replication state. A successful deployment should show: The subscribed group and forwarding tree are visible and multicast packets reach authorized receivers.
TLOC extension enables a neighboring WAN Edge to access another Edge's transport attachment. This principle is associated more closely with another situation: A dual-router branch has internet service only on Router A, but Router B must use that same transport as a separate TLOC.
OMP route selection considers advertised path attributes and TLOC reachability to resolve VPN prefixes. This principle is associated more closely with another situation: A remote Edge has the same VPN prefix advertised through two WAN transport paths and needs predictable route selection.
SD-WAN policy and configuration objects require appropriate association and deployment to affect devices. This principle is associated more closely with another situation: A network team publishes a policy group but assumes the rule is active on every WAN Edge by default.
A Cisco Catalyst SD-WAN deployment engineer is handling this requirement: A remote branch is exposed to a documented network exploit and standard stateless rules do not recognize the payload. Which action BEST addresses the situation?
Enable supported intrusion prevention inspection with current signature and threat policy settings. This is the targeted action for the stated case: A remote branch is exposed to a documented network exploit and standard stateless rules do not recognize the payload. The specific technical reason is: Intrusion Prevention Systems inspect traffic for known malicious patterns and enforce security actions. Verification should demonstrate: A controlled IPS test triggers the appropriate inspection event while normal traffic is allowed.
Configure service insertion with the appropriate centralized data policy and reachable firewall service path. This would help with a different network situation: Payment traffic entering the SD-WAN fabric must traverse an approved firewall before reaching a protected data-center application.
Evaluate supported SGT propagation and TrustSec policy integration across the intended WAN Edge platforms. This would help with a different network situation: A campus uses Cisco TrustSec security group tags and wants the SD-WAN policy to preserve identity-based segmentation context.
Inspect application firewall logs, security policy counters and actual application classification for the failed flow. This would help with a different network situation: A remote site's embedded firewall is installed but the administrator cannot tell which policy rule blocked a permitted SaaS application.
A Cisco SD-WAN deployment has completed the following step: Configure OSPF in the correct service VPN and export intended learned routes into OMP. The original case is: A branch Edge peers with a local OSPF router but its learned campus subnets do not enter the overlay. Which test result provides the strongest evidence that the change succeeded?
The OSPF neighbor is full and selected campus prefixes appear in remote OMP route tables. This observable result validates the corrective action: Configure OSPF in the correct service VPN and export intended learned routes into OMP.
Failing the primary link moves permitted traffic to the established alternate data-plane tunnel. That observation would verify another change: A link-redundant Edge should use a secondary internet TLOC when the primary data tunnel fails. The expected result instead is: The OSPF neighbor is full and selected campus prefixes appear in remote OMP route tables.
Hosts retain the virtual gateway address when the active Edge is failed in a controlled test. That observation would verify another change: Two branch Edges face the same user VLAN and need a single virtual default gateway that survives device failure. The expected result instead is: The OSPF neighbor is full and selected campus prefixes appear in remote OMP route tables.
Expected approved BGP prefixes reach remote Edges and unauthorized routes remain filtered. That observation would verify another change: A data-center Edge peers with existing BGP routers and must maintain route policies while joining the fabric. The expected result instead is: The OSPF neighbor is full and selected campus prefixes appear in remote OMP route tables.
The team applies this planned Catalyst SD-WAN change: Restore a unique stable system IP and validate TLOC identities before changing transport policy. The original case is: A branch changes its system IP during troubleshooting and unexpectedly affects many overlay transport advertisements. What observation most directly verifies the intended behavior?
OMP and data tunnel telemetry show the expected system IP on every TLOC from the Edge. This observable result validates the corrective action: Restore a unique stable system IP and validate TLOC identities before changing transport policy.
The subscribed group and forwarding tree are visible and multicast packets reach authorized receivers. That observation would verify another change: Branch receivers issue IGMP joins but no multicast arrives from a campus source across the overlay. The expected result instead is: OMP and data tunnel telemetry show the expected system IP on every TLOC from the Edge.
The peers negotiate compatible encapsulation and establish the expected data tunnel. That observation would verify another change: A transport route advertises a TLOC with an encapsulation type that does not match the intended peer tunnel design. The expected result instead is: OMP and data tunnel telemetry show the expected system IP on every TLOC from the Edge.
The MPLS and internet TLOCs appear separately with intended transport classifications. That observation would verify another change: A transport engineer provisions a new link but both MPLS and internet interfaces use the same color without a design decision. The expected result instead is: OMP and data tunnel telemetry show the expected system IP on every TLOC from the Edge.
The team suggests this solution: Correct the organization name consistently across authorized Controllers and registered Edges. The triggering scenario is: Two controller nodes use different organization-name values despite sharing the same trust root. Which underlying SD-WAN behavior BEST explains the response?
The SD-WAN organization name is part of the authenticated logical fabric identity. This technical mechanism explains why the recommended action works: Correct the organization name consistently across authorized Controllers and registered Edges. A successful deployment should show: Secure control handshakes recognize the same organization identity and reach established state.
Secure control sessions require current signed device certificates that remain within their validity interval. This principle is associated more closely with another situation: A control node's identity certificate will expire during a planned campus change freeze.
On-premises control-plane high availability requires diverse network reachability as well as VM redundancy. This principle is associated more closely with another situation: A regional operator proposes controller redundancy but provides no plan for network isolation between data centers.
Mutual SD-WAN control authentication requires compatible certificate authority trust roots. This principle is associated more closely with another situation: An administrator loads a certificate with the wrong organizational root onto only one WAN Edge.
After a controlled WAN fabric change, operations reports this action: Use a flow-level data policy with an alternate valid transport action and tested fallback behavior. The original case is: A local internet application should be rerouted during a primary WAN outage without rewriting every campus subnet advertisement. Which specific measurement would justify closing the change ticket?
A controlled outage shifts matching packets to the backup TLOC while unaffected traffic retains policy. This observable result validates the corrective action: Use a flow-level data policy with an alternate valid transport action and tested fallback behavior.
Traffic captures show inventory on MPLS and permitted guest web flows on the intended broadband exit. That observation would verify another change: A branch's guest web traffic must use broadband while inventory transactions must use MPLS, regardless of shared destination prefixes. The expected result instead is: A controlled outage shifts matching packets to the backup TLOC while unaffected traffic retains policy.
A controlled application session traverses the inspected service before arriving at the target network. That observation would verify another change: A security team wants branch traffic for one application redirected through a central inspection service. The expected result instead is: A controlled outage shifts matching packets to the backup TLOC while unaffected traffic retains policy.
The targeted prefix is absent from protected sites while permitted OMP routes remain reachable. That observation would verify another change: An SD-WAN Controller accepts an OMP route from an untrusted segment, exposing it to unrelated branch sites. The expected result instead is: A controlled outage shifts matching packets to the backup TLOC while unaffected traffic retains policy.
or Guarantee your success by buying the full version which covers the full latest pool of questions. (480 Questions, Last Updated on Nov 11, 2026)
Please check your mailbox for a message from support@examlabs.com and follow the directions.