You save $69.98
300-415 Premium Bundle
- Premium File 480 Questions & Answers
- Last Update: Nov 11, 2026
- Training Course 112 Lectures
- Study Guide 874 Pages
You save $69.98
Consider the following branch WAN issue: An MPLS tunnel and internet tunnel are up, yet VoIP MOS drops during bursts of jitter on one path. What is the most relevant operational risk in this situation?
Assuming up/down tunnel state fully represents usable voice quality can lead to persistent poor calls. BFD provides quality metrics that can inform application-aware overlay path selection. The recommended mitigation is: Compare BFD-reported data tunnel quality before recommending transport-dependent application routing.
Treating the Validator as the route reflector leaves the overlay routing design incomplete. That risk applies mainly to a different case: A new branch can contact the public SD-WAN Validator, but the engineer mistakenly expects that component to distribute all branch routes.
Treating network ICMP latency as equivalent to actual SaaS availability can hide user-experience faults. That risk applies mainly to a different case: A SaaS performance analyst sees good generic ICMP response to the internet but repeated poor cloud application transactions.
Attempting to provision every edge solely on the Controller bypasses centralized configuration management. That risk applies mainly to a different case: A network administrator wants one central interface to deploy configurations and inventory hundreds of Catalyst WAN Edge routers.
A network engineer is asked to resolve this SD-WAN issue: A branch should steer a known backup application through MPLS while allowing routine internet browsing through local DIA. What is the most appropriate first configuration or operational step?
Apply a suitable centralized data policy with specific application or destination matching and forwarding action. This is the targeted action for the stated case: A branch should steer a known backup application through MPLS while allowing routine internet browsing through local DIA. The specific technical reason is: Centralized data policy can match individual traffic flows and steer their forwarding independently of general route preference. Verification should demonstrate: Only the backup traffic follows the MPLS TLOC and ordinary browsing keeps its intended exit.
Apply an appropriate localized or centralized data filtering policy with the correct ingress direction. This would help with a different network situation: A network engineer needs to drop a malicious traffic class at ingress before it enters the overlay.
Use a supported data policy service-insertion action and appropriate service reachability. This would help with a different network situation: A security team wants branch traffic for one application redirected through a central inspection service.
Configure direct internet access with the appropriate service VPN route, NAT and security policy. This would help with a different network situation: A remote office has a public internet circuit but all web traffic hairpins through headquarters by default.
An engineer proposes this Catalyst SD-WAN remedy: Configure an application-aware routing SLA class and prefer TLOCs meeting voice performance targets. The triggering scenario is: VoIP sessions suffer high jitter on internet while MPLS has lower latency and less packet loss. Which underlying SD-WAN behavior BEST explains the response?
Application-aware routing uses BFD loss, latency and jitter measurements against configured SLA thresholds. This technical mechanism explains why the recommended action works: Configure an application-aware routing SLA class and prefer TLOCs meeting voice performance targets. A successful deployment should show: After internet impairment, voice traffic selects the eligible MPLS path based on measured tunnel quality.
VPN membership and route distribution determine which segment's prefixes each Edge can access. This principle is associated more closely with another situation: A new branch can reach a hub's external service VPN but not a second shared-services VPN.
AAR associates application traffic with measured transport SLA and ordered path preferences. This principle is associated more closely with another situation: A video conference should use broadband normally but MPLS when broadband exceeds a latency threshold.
AAR relies on measured performance characteristics beyond basic data tunnel liveliness. This principle is associated more closely with another situation: An engineer uses BFD up/down alone to claim that a video application receives sufficient QoE.
Consider the following branch WAN issue: A new Controller can reach the Manager but cannot build the expected secure session to its Validator. What is the most relevant operational risk in this situation?
Adding local Edge service routes is not a remedy for a Controller-to-Validator control handshake fault. Control components must independently establish authenticated connections over their transport network. The recommended mitigation is: Inspect configured Controller interfaces, organization, certificate trust, and transport firewall path.
Treating established DTLS sessions as proof that every service prefix was advertised can delay repair. That risk applies mainly to a different case: An Edge reports established control connections but no remote service prefixes appear in its OMP table.
A CSR is only a signing request and cannot replace the signed identity certificate. That risk applies mainly to a different case: An SD-WAN Manager generates a CSR for a new Controller but the administrator assumes it is already trusted.
Replacing the Manager GUI cannot address recurring transport or NAT session instability. That risk applies mainly to a different case: A site loses Controller peers every few minutes even though its WAN circuit stays physically up.
A Catalyst SD-WAN operations review encounters this case: A branch has two controllers, and the operator expects routers to form data-plane tunnels through the controllers. What failure mode is MOST directly associated with leaving it uncorrected?
Hairpinning all branch data through control-plane nodes can create unintended bottlenecks. The SD-WAN Controller handles control-plane exchange while WAN Edges forward overlay data-plane traffic. The recommended mitigation is: Check that IPsec data tunnels are established directly between eligible WAN Edge endpoints, not through controllers.
Treating local underlay reachability as proof that OMP routing is healthy can conceal missing overlay routes. That risk applies mainly to a different case: An edge has two internet transports but its remote prefixes are absent even though local underlay gateways respond.
Installing a small branch router at a data center can create interface and resiliency shortfalls. That risk applies mainly to a different case: A regional aggregation site needs high interface density and resilient power that a small remote-office Edge lacks.
Mislabeling a public interface with a private transport color can undermine intended path reachability. That risk applies mainly to a different case: A fabric uses MPLS and internet transports and must prevent internet-only endpoints from being mistaken for private MPLS circuits.
A network engineer is asked to resolve this SD-WAN issue: A fleet uses repeated interface, system and routing settings, but engineers edit every router independently through CLI. What is the most appropriate first configuration or operational step?
Adopt SD-WAN Manager configuration groups and reusable feature profiles for common settings. This is the targeted action for the stated case: A fleet uses repeated interface, system and routing settings, but engineers edit every router independently through CLI. The specific technical reason is: Configuration groups compose reusable feature profiles for centrally managed Catalyst WAN Edge deployments. Verification should demonstrate: Deploying an updated profile consistently changes the intended devices without individual CLI drift.
Choose the supported management method and migrate the device association rather than using both simultaneously. This would help with a different network situation: A Router is already attached to a legacy device template when a manager attempts to add it to a configuration group.
Use device-specific values for the required transport interface fields within the reusable group. This would help with a different network situation: A configuration group includes a system profile but an internet interface's IP address must vary by site.
Review the OMP advertised-path limit and confirm intended equal-cost path distribution. This would help with a different network situation: One Edge has an OMP neighbor session that is up, yet route propagation stops after the configured path limit.
After a controlled WAN fabric change, operations reports this action: Assign the correct supported color to each transport tunnel interface and verify OMP advertisement. The original case is: A transport engineer provisions a new link but both MPLS and internet interfaces use the same color without a design decision. Which specific measurement would justify closing the change ticket?
The MPLS and internet TLOCs appear separately with intended transport classifications. This observable result validates the corrective action: Assign the correct supported color to each transport tunnel interface and verify OMP advertisement.
Failing the primary link moves permitted traffic to the established alternate data-plane tunnel. That observation would verify another change: A link-redundant Edge should use a secondary internet TLOC when the primary data tunnel fails. The expected result instead is: The MPLS and internet TLOCs appear separately with intended transport classifications.
Ordinary traffic prefers primary transport while LTE remains available after a simulated primary outage. That observation would verify another change: An administrator wants a branch's high-cost LTE link to remain present but act primarily as a backup TLOC. The expected result instead is: The MPLS and internet TLOCs appear separately with intended transport classifications.
OMP and data tunnel telemetry show the expected system IP on every TLOC from the Edge. That observation would verify another change: A branch changes its system IP during troubleshooting and unexpectedly affects many overlay transport advertisements. The expected result instead is: The MPLS and internet TLOCs appear separately with intended transport classifications.
The team applies this planned Catalyst SD-WAN change: Inspect certificate expiration and renew it through an approved enrollment process before the deadline. The original case is: A control node's identity certificate will expire during a planned campus change freeze. What observation most directly verifies the intended behavior?
The renewed certificate has the expected validity chain and uninterrupted control-plane authentication. This observable result validates the corrective action: Inspect certificate expiration and renew it through an approved enrollment process before the deadline.
Mutual authentication succeeds with certificates chaining to the configured trusted enterprise CA. That observation would verify another change: An enterprise uses its own certificate authority and the Controllers reject the custom device certificate chain. The expected result instead is: The renewed certificate has the expected validity chain and uninterrupted control-plane authentication.
A known healthy Edge restores control connectivity after permitted signaling egress is reinstated. That observation would verify another change: A provider-hosted Manager shows all Edges as disconnected after an internet egress policy update. The expected result instead is: The renewed certificate has the expected validity chain and uninterrupted control-plane authentication.
Secure control handshakes recognize the same organization identity and reach established state. That observation would verify another change: Two controller nodes use different organization-name values despite sharing the same trust root. The expected result instead is: The renewed certificate has the expected validity chain and uninterrupted control-plane authentication.
A Cisco Catalyst SD-WAN deployment engineer is handling this requirement: A remote branch router arrives with no final configuration and the deployment team wants it to join the fabric without an engineer on site. Which action BEST addresses the situation?
Register its approved serial and use the supported Plug and Play or ZTP onboarding workflow with reachable Validator. This is the targeted action for the stated case: A remote branch router arrives with no final configuration and the deployment team wants it to join the fabric without an engineer on site. The specific technical reason is: Automated WAN Edge onboarding combines trusted identity, orchestration, and centralized configuration delivery. Verification should demonstrate: After first boot, the Edge discovers the fabric and obtains its assigned configuration through authorized provisioning.
Validate the common logical site ID and unique system IP values before production onboarding. This would help with a different network situation: An administrator enrolls two routers at one campus but assigns a different site ID to each without intending separate sites.
Make the neighbor-address field device-specific in the appropriate Manager feature template or profile. This would help with a different network situation: One device template is shared by 200 sites, but only the BGP neighbor address should differ per Edge.
Design a redundant regional-hub deployment with distinct Edge identities, reachable transport, and proper routing policy. This would help with a different network situation: A large regional distribution site must connect dozens of branches through two resilient regional WAN Edge nodes.
A fabric administrator recommends the following change: Configure a supported packet-duplication policy for the affected application on available secondary paths. The triggering scenario is: A real-time application loses bursts of packets on one of two usable internet transports and can tolerate duplicate delivery. Which underlying SD-WAN behavior BEST explains the response?
Packet duplication sends redundant traffic copies across eligible paths to reduce the impact of packet loss. This technical mechanism explains why the recommended action works: Configure a supported packet-duplication policy for the affected application on available secondary paths. A successful deployment should show: A controlled single-path loss produces fewer missed application packets when duplicate packets arrive.
TCP optimization targets protocol behavior and round-trip overhead that affect application experience. This principle is associated more closely with another situation: A high-latency WAN hosts an application with numerous small TCP exchanges and poor response time.
Forward Error Correction adds recovery information so receivers can repair some losses without retransmission. This principle is associated more closely with another situation: A voice call experiences moderate random packet loss and the operator wants recovery without full duplicate packets.
TrustSec uses security group classifications to support scalable identity-oriented access control. This principle is associated more closely with another situation: A campus uses Cisco TrustSec security group tags and wants the SD-WAN policy to preserve identity-based segmentation context.
An engineer proposes this Catalyst SD-WAN remedy: Evaluate supported Data Redundancy Elimination with appropriate peers and application eligibility. The triggering scenario is: A file-transfer workload repeatedly sends substantially identical large data blocks over a constrained WAN. Which underlying SD-WAN behavior BEST explains the response?
DRE reduces repeated data transmission by recognizing and substituting redundant content patterns. This technical mechanism explains why the recommended action works: Evaluate supported Data Redundancy Elimination with appropriate peers and application eligibility. A successful deployment should show: Measured WAN bytes decrease for repeated data patterns without changing the recovered content.
Service chaining requires both a matching flow policy and valid reachability to the service function. This principle is associated more closely with another situation: A branch relies on a regional security appliance but the policy uses a service destination that is not advertised in the correct VPN.
Forward Error Correction adds recovery information so receivers can repair some losses without retransmission. This principle is associated more closely with another situation: A voice call experiences moderate random packet loss and the operator wants recovery without full duplicate packets.
Packet duplication sends redundant traffic copies across eligible paths to reduce the impact of packet loss. This principle is associated more closely with another situation: A real-time application loses bursts of packets on one of two usable internet transports and can tolerate duplicate delivery.
or Guarantee your success by buying the full version which covers the full latest pool of questions. (480 Questions, Last Updated on Nov 11, 2026)
Please check your mailbox for a message from support@examlabs.com and follow the directions.