You save $69.98
300-415 Premium Bundle
- Premium File 480 Questions & Answers
- Last Update: Nov 11, 2026
- Training Course 112 Lectures
- Study Guide 874 Pages
You save $69.98
The team suggests this solution: Use the supported application-identification match in the AAR policy for the intended traffic class. The triggering scenario is: A critical financial application is identified by DPI but the AAR rule matches only TCP port 443 without app context. Which underlying SD-WAN behavior BEST explains the response?
Application-aware routing can use classified applications rather than only transport port numbers. This technical mechanism explains why the recommended action works: Use the supported application-identification match in the AAR policy for the intended traffic class. A successful deployment should show: Only the intended financial application receives the specified transport SLA behavior.
SD-WAN policy scopes direct internet breakout by service VPN and permitted traffic categories. This principle is associated more closely with another situation: A guest VPN may use DIA but corporate finance traffic must continue through the inspected headquarters gateway.
AAR relies on measured performance characteristics beyond basic data tunnel liveliness. This principle is associated more closely with another situation: An engineer uses BFD up/down alone to claim that a video application receives sufficient QoE.
AAR associates application traffic with measured transport SLA and ordered path preferences. This principle is associated more closely with another situation: A video conference should use broadband normally but MPLS when broadband exceeds a latency threshold.
A Cisco Catalyst SD-WAN deployment engineer is handling this requirement: A new operations user must view SD-WAN alarms but must not push configurations or alter global policies. Which action BEST addresses the situation?
Assign a Manager role with appropriate read-only monitoring privileges and test access. This is the targeted action for the stated case: A new operations user must view SD-WAN alarms but must not push configurations or alter global policies. The specific technical reason is: Manager role-based access control separates monitoring activities from privileged configuration tasks. Verification should demonstrate: The user can open monitoring dashboards but cannot save or deploy protected configuration changes.
Inspect Manager alarms and historical control or BFD events around the exact outage time. This would help with a different network situation: A branch shows repeated tunnel flaps and support needs the event history leading to the most recent outage.
Enable or review Manager audit logs and configuration change history under appropriate privileges. This would help with a different network situation: An auditor requires evidence of who changed a branch configuration and when it was deployed.
Configure Manager monitoring thresholds and a notification path for the specific interface condition. This would help with a different network situation: A remote Edge suffers frequent interface errors and monitoring must alert staff before business applications fail.
A Catalyst SD-WAN operations review encounters this case: A branch should steer a known backup application through MPLS while allowing routine internet browsing through local DIA. What failure mode is MOST directly associated with leaving it uncorrected?
Changing OMP path preference globally can divert unrelated application traffic. Centralized data policy can match individual traffic flows and steer their forwarding independently of general route preference. The recommended mitigation is: Apply a suitable centralized data policy with specific application or destination matching and forwarding action.
Publishing only a Controller route list may not redirect selected application packets to a firewall. That risk applies mainly to a different case: A security team wants branch traffic for one application redirected through a central inspection service.
Broad policy scope can unintentionally change routing for other isolated customer VPNs. That risk applies mainly to a different case: A policy author creates a list of branch sites but mistakenly applies it without matching the intended VPN.
Editing every LAN route to steer one application is brittle and can disturb unrelated forwarding. That risk applies mainly to a different case: A local internet application should be rerouted during a primary WAN outage without rewriting every campus subnet advertisement.
Consider the following branch WAN issue: A transport route advertises a TLOC with an encapsulation type that does not match the intended peer tunnel design. What is the most relevant operational risk in this situation?
A mismatch in encapsulation cannot be fixed by changing only a service-side BGP prefix. TLOC attributes describe the tunnel endpoint capabilities used for overlay data-plane formation. The recommended mitigation is: Align supported tunnel encapsulation settings on eligible transport endpoints.
Treating the system IP as an arbitrary local interface address can destabilize overlay route identity. That risk applies mainly to a different case: A branch changes its system IP during troubleshooting and unexpectedly affects many overlay transport advertisements.
Advertising an unreachable private address as the usable remote endpoint can block tunnel establishment. That risk applies mainly to a different case: An Edge uses an internet circuit with dynamic public NAT and its remote peer tries to build tunnels to the private interface address.
Incorrect color assignment can confuse path policy and reduce expected transport diversity. That risk applies mainly to a different case: A transport engineer provisions a new link but both MPLS and internet interfaces use the same color without a design decision.
A Catalyst SD-WAN operations review encounters this case: A branch has application-aware policy defined but all paths fail to meet a strict loss threshold. What failure mode is MOST directly associated with leaving it uncorrected?
An unrealistically strict SLA without planned fallback can lead to unexpected forwarding decisions. AAR policies evaluate eligible path-quality measurements and apply configured fallback behavior when needed. The recommended mitigation is: Review the SLA class and implement a supported fallback preference for cases where no path meets SLA.
A VPN membership leak can expose sensitive internal routing to untrusted guest contexts. That risk applies mainly to a different case: A remote branch advertises a private finance prefix into a public guest service VPN by mistake.
A live tunnel can have unusable delay or loss despite BFD session reachability. That risk applies mainly to a different case: An engineer uses BFD up/down alone to claim that a video application receives sufficient QoE.
Overly sensitive path switching can worsen session quality even when alternate paths exist. That risk applies mainly to a different case: AAR path changes oscillate as transport loss fluctuates around a threshold during busy hours.
A network troubleshooting report describes the following condition: A branch MPLS circuit has correct local IP addressing but cannot reach a remote overlay endpoint over the underlay. Which consequence explains why this issue must be addressed?
Overlay routing changes cannot compensate for a missing transport underlay next hop. SD-WAN data tunnels require routable underlying transport connectivity independent of service VPN prefixes. The recommended mitigation is: Add or correct the transport VPN 0 default route and verify next-hop reachability on the MPLS circuit.
Equating transport TLOC reachability with service route advertisement can lead to false troubleshooting conclusions. That risk applies mainly to a different case: A technician sees a reachable TLOC on the Controller but no corresponding business LAN prefix.
Assuming one router automatically shares its physical transport with another can leave a redundant node without WAN service. That risk applies mainly to a different case: A dual-router branch has internet service only on Router A, but Router B must use that same transport as a separate TLOC.
Treating one-way packet reachability as sufficient can conceal asymmetric routing or IPsec faults. That risk applies mainly to a different case: Two WAN Edges can exchange OMP advertisements but encrypted user packets never return from one remote site.
Consider the following branch WAN issue: A video conference should use broadband normally but MPLS when broadband exceeds a latency threshold. What is the most relevant operational risk in this situation?
Applying an indiscriminate global transport switch can disrupt other applications unnecessarily. AAR associates application traffic with measured transport SLA and ordered path preferences. The recommended mitigation is: Configure the application class and SLA-aware path preference for broadband with eligible MPLS fallback.
Static best-prefix routing ignores live path performance and can leave voice on a degraded tunnel. That risk applies mainly to a different case: VoIP sessions suffer high jitter on internet while MPLS has lower latency and less packet loss.
A live tunnel can have unusable delay or loss despite BFD session reachability. That risk applies mainly to a different case: An engineer uses BFD up/down alone to claim that a video application receives sufficient QoE.
Configuring only a data traffic filter leaves unwanted routing advertisements in the control plane. That risk applies mainly to a different case: A finance service VPN should learn only hub-originated networks while other branch prefixes remain isolated.
A Cisco SD-WAN deployment has completed the following step: Configure an application-aware routing SLA class and prefer TLOCs meeting voice performance targets. The original case is: VoIP sessions suffer high jitter on internet while MPLS has lower latency and less packet loss. Which test result provides the strongest evidence that the change succeeded?
After internet impairment, voice traffic selects the eligible MPLS path based on measured tunnel quality. This observable result validates the corrective action: Configure an application-aware routing SLA class and prefer TLOCs meeting voice performance targets.
Telemetry shows fewer disruptive path switches while the application still avoids sustained bad paths. That observation would verify another change: AAR path changes oscillate as transport loss fluctuates around a threshold during busy hours. The expected result instead is: After internet impairment, voice traffic selects the eligible MPLS path based on measured tunnel quality.
Spokes reach designated hubs while direct spoke-to-spoke routing is absent unless deliberately allowed. That observation would verify another change: A hub-spoke topology is requested without relying on every site manually building static routes. The expected result instead is: After internet impairment, voice traffic selects the eligible MPLS path based on measured tunnel quality.
The application uses the documented backup behavior when all measured paths violate thresholds. That observation would verify another change: A branch has application-aware policy defined but all paths fail to meet a strict loss threshold. The expected result instead is: After internet impairment, voice traffic selects the eligible MPLS path based on measured tunnel quality.
The team suggests this solution: Inspect measured per-tunnel delay, jitter and loss relative to the video's SLA class. The triggering scenario is: An engineer uses BFD up/down alone to claim that a video application receives sufficient QoE. Which underlying SD-WAN behavior BEST explains the response?
AAR relies on measured performance characteristics beyond basic data tunnel liveliness. This technical mechanism explains why the recommended action works: Inspect measured per-tunnel delay, jitter and loss relative to the video's SLA class. A successful deployment should show: The selected transport maintains verified application quality metrics during controlled congestion.
Central control policies can explicitly reject or accept matched OMP routing updates. This principle is associated more closely with another situation: An SD-WAN Controller accepts an OMP route from an untrusted segment, exposing it to unrelated branch sites.
Predictive Path Recommendation augments path steering with learned forecasts rather than replacing measured network behavior. This principle is associated more closely with another situation: An operator expects an AI-driven predictive path recommendation to guarantee that every future path failure is prevented.
AAR policies evaluate eligible path-quality measurements and apply configured fallback behavior when needed. This principle is associated more closely with another situation: A branch has application-aware policy defined but all paths fail to meet a strict loss threshold.
A network engineer is asked to resolve this SD-WAN issue: A branch enables direct internet breakout for employees without a firewall or DNS security plan. What is the most appropriate first configuration or operational step?
Apply the intended local security controls and cloud security integration before enabling DIA broadly. This is the targeted action for the stated case: A branch enables direct internet breakout for employees without a firewall or DNS security plan. The specific technical reason is: DIA changes the traffic security enforcement point and requires planned local or cloud protection. Verification should demonstrate: Egress testing confirms internet access while disallowed websites and risky traffic are blocked.
Create a centralized OMP control policy filtering accepted VPN routes by site or prefix list. This would help with a different network situation: A finance service VPN should learn only hub-originated networks while other branch prefixes remain isolated.
Configure direct internet access with the appropriate service VPN route, NAT and security policy. This would help with a different network situation: A remote office has a public internet circuit but all web traffic hairpins through headquarters by default.
Match DIA by the correct service VPN and traffic class instead of adding a universal internet breakout. This would help with a different network situation: A guest VPN may use DIA but corporate finance traffic must continue through the inspected headquarters gateway.
A fabric administrator recommends the following change: Apply URL filtering policy with approved web-category and reputation criteria. The triggering scenario is: Users must be denied access to known phishing domains and selected nonbusiness website categories. Which underlying SD-WAN behavior BEST explains the response?
URL filtering evaluates requested destinations using web categories and reputation information. This technical mechanism explains why the recommended action works: Apply URL filtering policy with approved web-category and reputation criteria. A successful deployment should show: Known blocked URLs generate category or reputation deny records while allowed business sites remain reachable.
Application-aware enterprise firewalls classify traffic beyond basic five-tuple port and address matching. This principle is associated more closely with another situation: A branch wants to allow collaboration applications but block an unauthorized remote-access application even on TCP 443.
TLS proxy inspection terminates and reestablishes eligible encrypted sessions under configured trust controls. This principle is associated more closely with another situation: A regulated workflow requires inspection of selected TLS application traffic while protecting private keys and avoiding broad decryption.
Adaptive QoS can adjust per-tunnel or interface shaping based on observed transport behavior. This principle is associated more closely with another situation: A branch's available LTE uplink bandwidth fluctuates and a fixed static shaper wastes capacity or causes carrier loss.
or Guarantee your success by buying the full version which covers the full latest pool of questions. (480 Questions, Last Updated on Nov 11, 2026)
Please check your mailbox for a message from support@examlabs.com and follow the directions.