You save $69.98
300-415 Premium Bundle
- Premium File 480 Questions & Answers
- Last Update: Nov 11, 2026
- Training Course 112 Lectures
- Study Guide 874 Pages
You save $69.98
A Cisco Catalyst SD-WAN deployment engineer is handling this requirement: A network team publishes a policy group but assumes the rule is active on every WAN Edge by default. Which action BEST addresses the situation?
Associate and deploy the supported policy group to the intended devices and confirm attachment state. This is the targeted action for the stated case: A network team publishes a policy group but assumes the rule is active on every WAN Edge by default. The specific technical reason is: SD-WAN policy and configuration objects require appropriate association and deployment to affect devices. Verification should demonstrate: Only target devices report the intended applied policy after the Manager deployment workflow.
Adopt SD-WAN Manager configuration groups and reusable feature profiles for common settings. This would help with a different network situation: A fleet uses repeated interface, system and routing settings, but engineers edit every router independently through CLI.
Use device-specific values for the required transport interface fields within the reusable group. This would help with a different network situation: A configuration group includes a system profile but an internet interface's IP address must vary by site.
Place its WAN-facing interface and necessary underlay routes into the intended VPN 0 transport context. This would help with a different network situation: A site turns up a third MPLS circuit but it forwards traffic into the wrong transport VRF.
A Catalyst SD-WAN operations review encounters this case: A fleet uses repeated interface, system and routing settings, but engineers edit every router independently through CLI. What failure mode is MOST directly associated with leaving it uncorrected?
One-off manual configuration on hundreds of devices increases inconsistency and rollback complexity. Configuration groups compose reusable feature profiles for centrally managed Catalyst WAN Edge deployments. The recommended mitigation is: Adopt SD-WAN Manager configuration groups and reusable feature profiles for common settings.
Creating a policy object without device or site attachment may have no traffic effect. That risk applies mainly to a different case: A network team publishes a policy group but assumes the rule is active on every WAN Edge by default.
Equating transport TLOC reachability with service route advertisement can lead to false troubleshooting conclusions. That risk applies mainly to a different case: A technician sees a reachable TLOC on the Controller but no corresponding business LAN prefix.
Concurrent ownership assumptions between old templates and configuration groups can cause rejected deployment. That risk applies mainly to a different case: A Router is already attached to a legacy device template when a manager attempts to add it to a configuration group.
The team applies this planned Catalyst SD-WAN change: Inspect measured per-tunnel delay, jitter and loss relative to the video's SLA class. The original case is: An engineer uses BFD up/down alone to claim that a video application receives sufficient QoE. What observation most directly verifies the intended behavior?
The selected transport maintains verified application quality metrics during controlled congestion. This observable result validates the corrective action: Inspect measured per-tunnel delay, jitter and loss relative to the video's SLA class.
After internet impairment, voice traffic selects the eligible MPLS path based on measured tunnel quality. That observation would verify another change: VoIP sessions suffer high jitter on internet while MPLS has lower latency and less packet loss. The expected result instead is: The selected transport maintains verified application quality metrics during controlled congestion.
Only the backup traffic follows the MPLS TLOC and ordinary browsing keeps its intended exit. That observation would verify another change: A branch should steer a known backup application through MPLS while allowing routine internet browsing through local DIA. The expected result instead is: The selected transport maintains verified application quality metrics during controlled congestion.
The application uses the documented backup behavior when all measured paths violate thresholds. That observation would verify another change: A branch has application-aware policy defined but all paths fail to meet a strict loss threshold. The expected result instead is: The selected transport maintains verified application quality metrics during controlled congestion.
A network engineer is asked to resolve this SD-WAN issue: Two WAN Edges at the same campus have different router identities but the same site identifier. What is the most appropriate first configuration or operational step?
Review site ID and system IP assignments to express the campus as one site while retaining unique edge identities. This is the targeted action for the stated case: Two WAN Edges at the same campus have different router identities but the same site identifier. The specific technical reason is: System IP identifies each WAN Edge while site ID expresses logical site membership across devices. Verification should demonstrate: Each Edge has its own unique system IP but both identify the same logical campus site.
Put WAN-facing transport interfaces and their underlay routes in VPN 0, separate from service VPNs. This would help with a different network situation: A branch engineer places its ISP-facing interface into a customer service VPN and control connectivity never establishes.
Review Cisco Cloud OnRamp for Multicloud and supported cloud or interconnect attachment options. This would help with a different network situation: An enterprise must interconnect two cloud providers and several SD-WAN sites through a managed global backbone.
Design the Cisco Catalyst SD-WAN Multi-Region Fabric with appropriate core and border-router placement. This would help with a different network situation: Two geographic regions must retain local routing while exchanging selected inter-region routes through a backbone.
A network engineer is asked to resolve this SD-WAN issue: A network team must send only approved application categories through a colocation security stack, retaining other traffic on DIA. What is the most appropriate first configuration or operational step?
Design scoped colocation service insertion and traffic policy matching approved application flows. This is the targeted action for the stated case: A network team must send only approved application categories through a colocation security stack, retaining other traffic on DIA. The specific technical reason is: Colocation integration and SD-WAN policies can select which flows traverse service-function nodes. Verification should demonstrate: Only designated traffic traverses the security service-chain while other applications keep their chosen breakout.
Plan Cloud OnRamp for IaaS connectivity with the supported cloud gateways or virtual Edge components. This would help with a different network situation: A company hosts enterprise applications in a public IaaS virtual network and wants the SD-WAN fabric to reach that workload securely.
Evaluate a supported virtual Catalyst SD-WAN Edge platform such as Catalyst 8000V and its resource requirements. This would help with a different network situation: A branch needs an SD-WAN router but has no room for a physical appliance in its virtualized environment.
Check Cloud OnRamp for SaaS application-specific probes and metrics instead of relying only on ping. This would help with a different network situation: A SaaS performance analyst sees good generic ICMP response to the internet but repeated poor cloud application transactions.
A Cisco Catalyst SD-WAN deployment engineer is handling this requirement: A file-transfer workload repeatedly sends substantially identical large data blocks over a constrained WAN. Which action BEST addresses the situation?
Evaluate supported Data Redundancy Elimination with appropriate peers and application eligibility. This is the targeted action for the stated case: A file-transfer workload repeatedly sends substantially identical large data blocks over a constrained WAN. The specific technical reason is: DRE reduces repeated data transmission by recognizing and substituting redundant content patterns. Verification should demonstrate: Measured WAN bytes decrease for repeated data patterns without changing the recovered content.
Configure supported Advanced Malware Protection file inspection and appropriate action policy. This would help with a different network situation: A security team wants to detect suspicious executable files crossing an Edge, not just known malicious IPs.
Evaluate supported AppNav integration and the placement of compatible AppQoE services. This would help with a different network situation: A legacy application service must traverse an AppNav optimization function to improve WAN application experience.
Configure a supported packet-duplication policy for the affected application on available secondary paths. This would help with a different network situation: A real-time application loses bursts of packets on one of two usable internet transports and can tolerate duplicate delivery.
Consider this Catalyst SD-WAN operating scenario: A cloud branch is assigned to a new customer VPN but the Controller continues to distribute only the default service VPN. Which corrective response most directly meets the requirement?
Add the correct VPN membership and route-advertisement permissions for that cloud site. This is the targeted action for the stated case: A cloud branch is assigned to a new customer VPN but the Controller continues to distribute only the default service VPN. The specific technical reason is: End-to-end segmentation needs consistent VPN definition, service interfaces and routed membership. Verification should demonstrate: Cloud Edge and approved branches exchange only the new tenant VPN prefixes.
Configure the application class and SLA-aware path preference for broadband with eligible MPLS fallback. This would help with a different network situation: A video conference should use broadband normally but MPLS when broadband exceeds a latency threshold.
Verify that the branch is an authorized member of the second VPN and that its routes are exported. This would help with a different network situation: A new branch can reach a hub's external service VPN but not a second shared-services VPN.
Create distinct service VPN membership and scoped data and control policies for the two traffic classes. This would help with a different network situation: A policy intends to keep hospital telemetry isolated from guest browsing even though both use the same internet circuit.
The team applies this planned Catalyst SD-WAN change: Assign each department to a different service VPN and distribute only matching VPN routes. The original case is: Two departments use overlapping IP subnets but need independent communication inside a shared Catalyst SD-WAN fabric. What observation most directly verifies the intended behavior?
Both departments operate with their overlapping IPs without unintended cross-VPN route installation. This observable result validates the corrective action: Assign each department to a different service VPN and distribute only matching VPN routes.
A controlled outage shifts matching packets to the backup TLOC while unaffected traffic retains policy. That observation would verify another change: A local internet application should be rerouted during a primary WAN outage without rewriting every campus subnet advertisement. The expected result instead is: Both departments operate with their overlapping IPs without unintended cross-VPN route installation.
Guest routes exclude the finance prefix while authorized finance sites retain reachability. That observation would verify another change: A remote branch advertises a private finance prefix into a public guest service VPN by mistake. The expected result instead is: Both departments operate with their overlapping IPs without unintended cross-VPN route installation.
Telemetry routes and policies remain separate from guest routing over the same transport interface. That observation would verify another change: A policy intends to keep hospital telemetry isolated from guest browsing even though both use the same internet circuit. The expected result instead is: Both departments operate with their overlapping IPs without unintended cross-VPN route installation.
A network troubleshooting report describes the following condition: A network engineer needs to drop a malicious traffic class at ingress before it enters the overlay. Which consequence explains why this issue must be addressed?
Changing OMP route advertisement alone does not necessarily block already permitted local flows. Data policies can match and drop packets at the forwarding plane based on configured conditions. The recommended mitigation is: Apply an appropriate localized or centralized data filtering policy with the correct ingress direction.
Saving a policy draft without proper activation and attachment cannot modify active packet forwarding. That risk applies mainly to a different case: A policy is visible in Manager but no user traffic matches it on the designated WAN Edge.
Treating prediction as certainty can lead to unreviewed traffic shifts without operational safeguards. That risk applies mainly to a different case: An operator expects an AI-driven predictive path recommendation to guarantee that every future path failure is prevented.
An unscoped data policy can impose forwarding decisions on the wrong tenant. That risk applies mainly to a different case: A regional policy must affect only voice traffic from one service VPN, without touching data traffic in another tenant VPN.
A network engineer is asked to resolve this SD-WAN issue: A campus uses Cisco TrustSec security group tags and wants the SD-WAN policy to preserve identity-based segmentation context. What is the most appropriate first configuration or operational step?
Evaluate supported SGT propagation and TrustSec policy integration across the intended WAN Edge platforms. This is the targeted action for the stated case: A campus uses Cisco TrustSec security group tags and wants the SD-WAN policy to preserve identity-based segmentation context. The specific technical reason is: TrustSec uses security group classifications to support scalable identity-oriented access control. Verification should demonstrate: Traffic maintains intended security-group treatment when traversing the authorized overlay path.
Configure a supported packet-duplication policy for the affected application on available secondary paths. This would help with a different network situation: A real-time application loses bursts of packets on one of two usable internet transports and can tolerate duplicate delivery.
Design a supported SSL or TLS proxy inspection policy with authorized certificate trust and exclusions. This would help with a different network situation: A regulated workflow requires inspection of selected TLS application traffic while protecting private keys and avoiding broad decryption.
Apply URL filtering policy with approved web-category and reputation criteria. This would help with a different network situation: Users must be denied access to known phishing domains and selected nonbusiness website categories.
A fabric administrator recommends the following change: Separate tenant LANs into distinct service VPNs while retaining the common transport VPN for the underlay. The triggering scenario is: A branch design uses overlapping LAN prefixes in two tenants and fears that one shared transport network merges their traffic. Which underlying SD-WAN behavior BEST explains the response?
Cisco SD-WAN service VPN segmentation separates routing domains across a shared encrypted transport fabric. This technical mechanism explains why the recommended action works: Separate tenant LANs into distinct service VPNs while retaining the common transport VPN for the underlay. A successful deployment should show: The same overlapping prefix is reachable in its intended VPN context without leaking between tenants.
An advertised OMP vRoute still depends on a reachable TLOC and functioning data-plane tunnel. This principle is associated more closely with another situation: A remote Edge has an OMP route but cannot build a usable tunnel because the peer transport is unreachable over the underlay.
SaaS application experience telemetry assesses application reachability and performance beyond raw circuit pings. This principle is associated more closely with another situation: A SaaS performance analyst sees good generic ICMP response to the internet but repeated poor cloud application transactions.
Multi-Region Fabric introduces hierarchical regional routing with border functions to control inter-region connectivity. This principle is associated more closely with another situation: Two geographic regions must retain local routing while exchanging selected inter-region routes through a backbone.
or Guarantee your success by buying the full version which covers the full latest pool of questions. (480 Questions, Last Updated on Nov 11, 2026)
Please check your mailbox for a message from support@examlabs.com and follow the directions.