Pass Juniper JN0-650 Exam in First Attempt Easily
Real Juniper JN0-650 Exam Questions, Accurate & Verified Answers As Experienced in the Actual Test!

Verified by experts

JN0-650 Premium File

  • 107 Questions & Answers
  • Last Update: Nov 8, 2026
$69.99 $76.99

Enterprise Routing and Switching, Professional (JNCIP-ENT) JN0-650 Practice Test 17

Question 160

An IBGP router fails to advertise a route received from one IBGP peer to another IBGP peer in a non-route-reflected full mesh gap. If the team bypasses or fails to implement the targeted correction (Deploy a correctly designed route reflector or the necessary full-mesh IBGP peering relationships.), which direct operational risk or residual exposure is MOST relevant?

  1. An inconsistent reflection design can suppress valid paths or propagate redundant route updates.
  2. An unconditional export can leak prefixes when the intended backing reachability disappears.
  3. Assuming IBGP is transitive through any intermediate speaker can strand learned prefixes.
  4. Losing required extended-community metadata can break downstream tagging or route-target policy.

Explanation

Correct Answer

C:

Assuming IBGP is transitive through any intermediate speaker can strand learned prefixes. This is the consequence linked to the observed situation: An IBGP router fails to advertise a route received from one IBGP peer to another IBGP peer in a non-route-reflected full mesh gap. It is prevented by: Deploy a correctly designed route reflector or the necessary full-mesh IBGP peering relationships. The underlying reason is: IBGP split-horizon advertisement rules prevent ordinary IBGP-to-IBGP readvertisement without reflection.

Incorrect Answers

A:

An inconsistent reflection design can suppress valid paths or propagate redundant route updates. This risk belongs to a different operational problem: A route reflector cluster loops reflected routing information after newly created reflectors were assigned inconsistent cluster identities. The stated condition instead exposes this direct risk: Assuming IBGP is transitive through any intermediate speaker can strand learned prefixes. The appropriate mitigation is: Deploy a correctly designed route reflector or the necessary full-mesh IBGP peering relationships.

B:

An unconditional export can leak prefixes when the intended backing reachability disappears. This risk belongs to a different operational problem: A partner asks a Junos edge to advertise a longer prefix only when a certain route is present in the active routing table. The stated condition instead exposes this direct risk: Assuming IBGP is transitive through any intermediate speaker can strand learned prefixes. The appropriate mitigation is: Deploy a correctly designed route reflector or the necessary full-mesh IBGP peering relationships.

D:

Losing required extended-community metadata can break downstream tagging or route-target policy. This risk belongs to a different operational problem: Two routers share BGP routes but their intended extended-community values are absent at a downstream policy boundary. The stated condition instead exposes this direct risk: Assuming IBGP is transitive through any intermediate speaker can strand learned prefixes. The appropriate mitigation is: Deploy a correctly designed route reflector or the necessary full-mesh IBGP peering relationships.

Question 161

A route reflector cluster loops reflected routing information after newly created reflectors were assigned inconsistent cluster identities. Which targeted engineering change is MOST directly justified by the observed evidence?

  1. Review route reflector cluster identifiers and reflected route attributes for the actual intended topology.
  2. Deploy a correctly designed route reflector or the necessary full-mesh IBGP peering relationships.
  3. Use a term-based BGP export policy that matches the authorized active route and accepted prefix.
  4. Prefer the valid path with higher local preference before comparing AS-path length under Junos BGP selection.

Explanation

Correct Answer

A:

Review route reflector cluster identifiers and reflected route attributes for the actual intended topology. This change specifically addresses the reported evidence: A route reflector cluster loops reflected routing information after newly created reflectors were assigned inconsistent cluster identities. The relevant protocol mechanism is: BGP reflection uses originator and cluster-list information to help prevent reflection loops. A decisive acceptance test would be: Cluster-list and originator attributes prevent a reflected route being accepted back into its origin cluster.

Incorrect Answers

B:

Deploy a correctly designed route reflector or the necessary full-mesh IBGP peering relationships. This is a valid solution to a different Junos situation: An IBGP router fails to advertise a route received from one IBGP peer to another IBGP peer in a non-route-reflected full mesh gap. It does not directly correct the specific failure evidence here: A route reflector cluster loops reflected routing information after newly created reflectors were assigned inconsistent cluster identities. The required targeted change is: Review route reflector cluster identifiers and reflected route attributes for the actual intended topology.

C:

Use a term-based BGP export policy that matches the authorized active route and accepted prefix. This is a valid solution to a different Junos situation: A partner asks a Junos edge to advertise a longer prefix only when a certain route is present in the active routing table. It does not directly correct the specific failure evidence here: A route reflector cluster loops reflected routing information after newly created reflectors were assigned inconsistent cluster identities. The required targeted change is: Review route reflector cluster identifiers and reflected route attributes for the actual intended topology.

D:

Prefer the valid path with higher local preference before comparing AS-path length under Junos BGP selection. This is a valid solution to a different Junos situation: Two valid BGP paths for one prefix have different local preference attributes, 180 on ISP-A and 100 on ISP-B, but the operator chooses the shorter AS path on B. It does not directly correct the specific failure evidence here: A route reflector cluster loops reflected routing information after newly created reflectors were assigned inconsistent cluster identities. The required targeted change is: Review route reflector cluster identifiers and reflected route attributes for the actual intended topology.

Question 162

A route reflector cluster loops reflected routing information after newly created reflectors were assigned inconsistent cluster identities. The proposed correction is: Review route reflector cluster identifiers and reflected route attributes for the actual intended topology. Which observation MOST directly confirms this fault is resolved?

  1. The downstream IBGP client learns the intended route without creating an unintended loop.
  2. Cluster-list and originator attributes prevent a reflected route being accepted back into its origin cluster.
  3. The peer receives precisely the eligible prefix and withdraws it when export conditions fail.
  4. The best-path display chooses ISP-A when reachability and earlier selection criteria are satisfied.

Explanation

Correct Answer

B:

Cluster-list and originator attributes prevent a reflected route being accepted back into its origin cluster. This is the direct acceptance evidence for the observed failure: A route reflector cluster loops reflected routing information after newly created reflectors were assigned inconsistent cluster identities. The mechanism being validated is: BGP reflection uses originator and cluster-list information to help prevent reflection loops.

Incorrect Answers

A:

The downstream IBGP client learns the intended route without creating an unintended loop. That would validate a different condition: An IBGP router fails to advertise a route received from one IBGP peer to another IBGP peer in a non-route-reflected full mesh gap. The decisive check for the current issue is: Cluster-list and originator attributes prevent a reflected route being accepted back into its origin cluster.

C:

The peer receives precisely the eligible prefix and withdraws it when export conditions fail. That would validate a different condition: A partner asks a Junos edge to advertise a longer prefix only when a certain route is present in the active routing table. The decisive check for the current issue is: Cluster-list and originator attributes prevent a reflected route being accepted back into its origin cluster.

D:

The best-path display chooses ISP-A when reachability and earlier selection criteria are satisfied. That would validate a different condition: Two valid BGP paths for one prefix have different local preference attributes, 180 on ISP-A and 100 on ISP-B, but the operator chooses the shorter AS path on B. The decisive check for the current issue is: Cluster-list and originator attributes prevent a reflected route being accepted back into its origin cluster.

Question 163

A Junos engineer proposes this response: Review route reflector cluster identifiers and reflected route attributes for the actual intended topology. The situation is: A route reflector cluster loops reflected routing information after newly created reflectors were assigned inconsistent cluster identities. Which technical principle BEST justifies the response?

  1. IBGP split-horizon advertisement rules prevent ordinary IBGP-to-IBGP readvertisement without reflection.
  2. Junos BGP export policy controls which locally eligible routes enter peer advertisements.
  3. BGP reflection uses originator and cluster-list information to help prevent reflection loops.
  4. Junos BGP compares higher LOCAL_PREF before shorter AS-path in ordinary best-path selection.

Explanation

Correct Answer

C:

BGP reflection uses originator and cluster-list information to help prevent reflection loops. This is the controlling mechanism in the specific case: A route reflector cluster loops reflected routing information after newly created reflectors were assigned inconsistent cluster identities. It predicts the acceptance result: Cluster-list and originator attributes prevent a reflected route being accepted back into its origin cluster.

Incorrect Answers

A:

IBGP split-horizon advertisement rules prevent ordinary IBGP-to-IBGP readvertisement without reflection. This principle explains a separate situation: An IBGP router fails to advertise a route received from one IBGP peer to another IBGP peer in a non-route-reflected full mesh gap. For this issue the relevant mechanism is: BGP reflection uses originator and cluster-list information to help prevent reflection loops.

B:

Junos BGP export policy controls which locally eligible routes enter peer advertisements. This principle explains a separate situation: A partner asks a Junos edge to advertise a longer prefix only when a certain route is present in the active routing table. For this issue the relevant mechanism is: BGP reflection uses originator and cluster-list information to help prevent reflection loops.

D:

Junos BGP compares higher LOCAL_PREF before shorter AS-path in ordinary best-path selection. This principle explains a separate situation: Two valid BGP paths for one prefix have different local preference attributes, 180 on ISP-A and 100 on ISP-B, but the operator chooses the shorter AS path on B. For this issue the relevant mechanism is: BGP reflection uses originator and cluster-list information to help prevent reflection loops.

Question 164

A route reflector cluster loops reflected routing information after newly created reflectors were assigned inconsistent cluster identities. If the team bypasses or fails to implement the targeted correction (Review route reflector cluster identifiers and reflected route attributes for the actual intended topology.), which direct operational risk or residual exposure is MOST relevant?

  1. Assuming IBGP is transitive through any intermediate speaker can strand learned prefixes.
  2. An unconditional export can leak prefixes when the intended backing reachability disappears.
  3. Ignoring local preference can produce a wrong expected egress and incorrect policy remediation.
  4. An inconsistent reflection design can suppress valid paths or propagate redundant route updates.

Explanation

Correct Answer

D:

An inconsistent reflection design can suppress valid paths or propagate redundant route updates. This is the consequence linked to the observed situation: A route reflector cluster loops reflected routing information after newly created reflectors were assigned inconsistent cluster identities. It is prevented by: Review route reflector cluster identifiers and reflected route attributes for the actual intended topology. The underlying reason is: BGP reflection uses originator and cluster-list information to help prevent reflection loops.

Incorrect Answers

A:

Assuming IBGP is transitive through any intermediate speaker can strand learned prefixes. This risk belongs to a different operational problem: An IBGP router fails to advertise a route received from one IBGP peer to another IBGP peer in a non-route-reflected full mesh gap. The stated condition instead exposes this direct risk: An inconsistent reflection design can suppress valid paths or propagate redundant route updates. The appropriate mitigation is: Review route reflector cluster identifiers and reflected route attributes for the actual intended topology.

B:

An unconditional export can leak prefixes when the intended backing reachability disappears. This risk belongs to a different operational problem: A partner asks a Junos edge to advertise a longer prefix only when a certain route is present in the active routing table. The stated condition instead exposes this direct risk: An inconsistent reflection design can suppress valid paths or propagate redundant route updates. The appropriate mitigation is: Review route reflector cluster identifiers and reflected route attributes for the actual intended topology.

C:

Ignoring local preference can produce a wrong expected egress and incorrect policy remediation. This risk belongs to a different operational problem: Two valid BGP paths for one prefix have different local preference attributes, 180 on ISP-A and 100 on ISP-B, but the operator chooses the shorter AS path on B. The stated condition instead exposes this direct risk: An inconsistent reflection design can suppress valid paths or propagate redundant route updates. The appropriate mitigation is: Review route reflector cluster identifiers and reflected route attributes for the actual intended topology.

Question 165

A BGP policy marks customer prefixes with a specific community, but the receiving policy has no match and permits unrestricted redistribution. Which targeted engineering change is MOST directly justified by the observed evidence?

  1. Replace catchall acceptance with ordered exact route-filter terms for permitted customer prefixes.
  2. Match the intended BGP community in a policy term and explicitly set the desired acceptance action.
  3. Confirm the appropriate family and community propagation settings on the BGP peering path.
  4. Evaluate supported BGP multipath settings and confirm that candidate attributes satisfy multipath rules.

Explanation

Correct Answer

B:

Match the intended BGP community in a policy term and explicitly set the desired acceptance action. This change specifically addresses the reported evidence: A BGP policy marks customer prefixes with a specific community, but the receiving policy has no match and permits unrestricted redistribution. The relevant protocol mechanism is: BGP communities are attachable route tags used by configured routing policies. A decisive acceptance test would be: Community-tagged routes are processed according to policy while other routes take the default rejection.

Incorrect Answers

A:

Replace catchall acceptance with ordered exact route-filter terms for permitted customer prefixes. This is a valid solution to a different Junos situation: A BGP edge is advertising an unintended private infrastructure prefix because a catchall export policy term accepted every active route. It does not directly correct the specific failure evidence here: A BGP policy marks customer prefixes with a specific community, but the receiving policy has no match and permits unrestricted redistribution. The required targeted change is: Match the intended BGP community in a policy term and explicitly set the desired acceptance action.

C:

Confirm the appropriate family and community propagation settings on the BGP peering path. This is a valid solution to a different Junos situation: Two routers share BGP routes but their intended extended-community values are absent at a downstream policy boundary. It does not directly correct the specific failure evidence here: A BGP policy marks customer prefixes with a specific community, but the receiving policy has no match and permits unrestricted redistribution. The required targeted change is: Match the intended BGP community in a policy term and explicitly set the desired acceptance action.

D:

Evaluate supported BGP multipath settings and confirm that candidate attributes satisfy multipath rules. This is a valid solution to a different Junos situation: An operator wants the same exit prefix installed with two eligible BGP next hops but only one is programmed even though costs are equal. It does not directly correct the specific failure evidence here: A BGP policy marks customer prefixes with a specific community, but the receiving policy has no match and permits unrestricted redistribution. The required targeted change is: Match the intended BGP community in a policy term and explicitly set the desired acceptance action.

Question 166

A BGP policy marks customer prefixes with a specific community, but the receiving policy has no match and permits unrestricted redistribution. The proposed correction is: Match the intended BGP community in a policy term and explicitly set the desired acceptance action. Which observation MOST directly confirms this fault is resolved?

  1. The received prefixes appear in the correct table and resolve the intended next hops.
  2. The targeted route is installed with a discard treatment, while unrelated routes are unaffected.
  3. Community-tagged routes are processed according to policy while other routes take the default rejection.
  4. Multiple distinct test flows distribute across eligible next hops while each flow retains packet order.

Explanation

Correct Answer

C:

Community-tagged routes are processed according to policy while other routes take the default rejection. This is the direct acceptance evidence for the observed failure: A BGP policy marks customer prefixes with a specific community, but the receiving policy has no match and permits unrestricted redistribution. The mechanism being validated is: BGP communities are attachable route tags used by configured routing policies.

Incorrect Answers

A:

The received prefixes appear in the correct table and resolve the intended next hops. That would validate a different condition: A BGP neighbor advertises prefixes but the receiving Junos instance assigns them to the wrong logical routing table because family/instance design differs. The decisive check for the current issue is: Community-tagged routes are processed according to policy while other routes take the default rejection.

B:

The targeted route is installed with a discard treatment, while unrelated routes are unaffected. That would validate a different condition: A border router receives a route tagged with an expected blackhole community, but no downstream filter implements the associated traffic-handling action. The decisive check for the current issue is: Community-tagged routes are processed according to policy while other routes take the default rejection.

D:

Multiple distinct test flows distribute across eligible next hops while each flow retains packet order. That would validate a different condition: Junos routing shows two equal-cost routes, but the forwarding table sends each tested flow down only one path while both next hops exist. The decisive check for the current issue is: Community-tagged routes are processed according to policy while other routes take the default rejection.

Question 167

A Junos engineer proposes this response: Match the intended BGP community in a policy term and explicitly set the desired acceptance action. The situation is: A BGP policy marks customer prefixes with a specific community, but the receiving policy has no match and permits unrestricted redistribution. Which technical principle BEST justifies the response?

  1. BGP address-family and routing-instance context determine where received routes are stored.
  2. Communities signal policy intent; forwarding behavior requires an explicit local action.
  3. BGP multipath can use multiple qualifying paths without making every non-best path eligible.
  4. BGP communities are attachable route tags used by configured routing policies.

Explanation

Correct Answer

D:

BGP communities are attachable route tags used by configured routing policies. This is the controlling mechanism in the specific case: A BGP policy marks customer prefixes with a specific community, but the receiving policy has no match and permits unrestricted redistribution. It predicts the acceptance result: Community-tagged routes are processed according to policy while other routes take the default rejection.

Incorrect Answers

A:

BGP address-family and routing-instance context determine where received routes are stored. This principle explains a separate situation: A BGP neighbor advertises prefixes but the receiving Junos instance assigns them to the wrong logical routing table because family/instance design differs. For this issue the relevant mechanism is: BGP communities are attachable route tags used by configured routing policies.

B:

Communities signal policy intent; forwarding behavior requires an explicit local action. This principle explains a separate situation: A border router receives a route tagged with an expected blackhole community, but no downstream filter implements the associated traffic-handling action. For this issue the relevant mechanism is: BGP communities are attachable route tags used by configured routing policies.

C:

BGP multipath can use multiple qualifying paths without making every non-best path eligible. This principle explains a separate situation: An operator wants the same exit prefix installed with two eligible BGP next hops but only one is programmed even though costs are equal. For this issue the relevant mechanism is: BGP communities are attachable route tags used by configured routing policies.

Question 168

A BGP policy marks customer prefixes with a specific community, but the receiving policy has no match and permits unrestricted redistribution. If the team bypasses or fails to implement the targeted correction (Match the intended BGP community in a policy term and explicitly set the desired acceptance action.), which direct operational risk or residual exposure is MOST relevant?

  1. A community alone does not enforce traffic policy until a receiver applies a matching action.
  2. Mixing route families or virtual tables can make reachable prefixes invisible to the intended service.
  3. Treating a community value as a universal automatic security filter leaves unwanted traffic permitted.
  4. Interpreting one test flow as proof that ECMP is disabled can lead to needless changes.

Explanation

Correct Answer

A:

A community alone does not enforce traffic policy until a receiver applies a matching action. This is the consequence linked to the observed situation: A BGP policy marks customer prefixes with a specific community, but the receiving policy has no match and permits unrestricted redistribution. It is prevented by: Match the intended BGP community in a policy term and explicitly set the desired acceptance action. The underlying reason is: BGP communities are attachable route tags used by configured routing policies.

Incorrect Answers

B:

Mixing route families or virtual tables can make reachable prefixes invisible to the intended service. This risk belongs to a different operational problem: A BGP neighbor advertises prefixes but the receiving Junos instance assigns them to the wrong logical routing table because family/instance design differs. The stated condition instead exposes this direct risk: A community alone does not enforce traffic policy until a receiver applies a matching action. The appropriate mitigation is: Match the intended BGP community in a policy term and explicitly set the desired acceptance action.

C:

Treating a community value as a universal automatic security filter leaves unwanted traffic permitted. This risk belongs to a different operational problem: A border router receives a route tagged with an expected blackhole community, but no downstream filter implements the associated traffic-handling action. The stated condition instead exposes this direct risk: A community alone does not enforce traffic policy until a receiver applies a matching action. The appropriate mitigation is: Match the intended BGP community in a policy term and explicitly set the desired acceptance action.

D:

Interpreting one test flow as proof that ECMP is disabled can lead to needless changes. This risk belongs to a different operational problem: Junos routing shows two equal-cost routes, but the forwarding table sends each tested flow down only one path while both next hops exist. The stated condition instead exposes this direct risk: A community alone does not enforce traffic policy until a receiver applies a matching action. The appropriate mitigation is: Match the intended BGP community in a policy term and explicitly set the desired acceptance action.

Question 169

Two routers share BGP routes but their intended extended-community values are absent at a downstream policy boundary. Which targeted engineering change is MOST directly justified by the observed evidence?

  1. Trigger and verify an appropriate policy refresh or update mechanism supported by the BGP peers.
  2. Create a carefully scoped policy that matches the authorized community and applies the intended discard next hop.
  3. Confirm the appropriate family and community propagation settings on the BGP peering path.
  4. Assign a higher local preference to the primary ISP routes at ingress and propagate it internally.

Explanation

Correct Answer

C:

Confirm the appropriate family and community propagation settings on the BGP peering path. This change specifically addresses the reported evidence: Two routers share BGP routes but their intended extended-community values are absent at a downstream policy boundary. The relevant protocol mechanism is: Extended communities provide structured BGP route metadata for supported applications and policies. A decisive acceptance test would be: The intended extended-community values appear on the received route and relevant policies match them.

Incorrect Answers

A:

Trigger and verify an appropriate policy refresh or update mechanism supported by the BGP peers. This is a valid solution to a different Junos situation: A new BGP policy changes outbound community values, but previously advertised routes still display old metadata at the downstream peer. It does not directly correct the specific failure evidence here: Two routers share BGP routes but their intended extended-community values are absent at a downstream policy boundary. The required targeted change is: Confirm the appropriate family and community propagation settings on the BGP peering path.

B:

Create a carefully scoped policy that matches the authorized community and applies the intended discard next hop. This is a valid solution to a different Junos situation: A border router receives a route tagged with an expected blackhole community, but no downstream filter implements the associated traffic-handling action. It does not directly correct the specific failure evidence here: Two routers share BGP routes but their intended extended-community values are absent at a downstream policy boundary. The required targeted change is: Confirm the appropriate family and community propagation settings on the BGP peering path.

D:

Assign a higher local preference to the primary ISP routes at ingress and propagate it internally. This is a valid solution to a different Junos situation: An enterprise wants every internal BGP router to favor the primary upstream even though that primary route traverses more external autonomous systems. It does not directly correct the specific failure evidence here: Two routers share BGP routes but their intended extended-community values are absent at a downstream policy boundary. The required targeted change is: Confirm the appropriate family and community propagation settings on the BGP peering path.

Question 170

Two routers share BGP routes but their intended extended-community values are absent at a downstream policy boundary. The proposed correction is: Confirm the appropriate family and community propagation settings on the BGP peering path. Which observation MOST directly confirms this fault is resolved?

  1. The downstream advertised route shows the updated community without unplanned neighbor disruption.
  2. The targeted route is installed with a discard treatment, while unrelated routes are unaffected.
  3. The accepted received AS path no longer violates the intended AS-loop policy at the upstream peer.
  4. The intended extended-community values appear on the received route and relevant policies match them.

Explanation

Correct Answer

D:

The intended extended-community values appear on the received route and relevant policies match them. This is the direct acceptance evidence for the observed failure: Two routers share BGP routes but their intended extended-community values are absent at a downstream policy boundary. The mechanism being validated is: Extended communities provide structured BGP route metadata for supported applications and policies.

Incorrect Answers

A:

The downstream advertised route shows the updated community without unplanned neighbor disruption. That would validate a different condition: A new BGP policy changes outbound community values, but previously advertised routes still display old metadata at the downstream peer. The decisive check for the current issue is: The intended extended-community values appear on the received route and relevant policies match them.

B:

The targeted route is installed with a discard treatment, while unrelated routes are unaffected. That would validate a different condition: A border router receives a route tagged with an expected blackhole community, but no downstream filter implements the associated traffic-handling action. The decisive check for the current issue is: The intended extended-community values appear on the received route and relevant policies match them.

C:

The accepted received AS path no longer violates the intended AS-loop policy at the upstream peer. That would validate a different condition: An EBGP peer unexpectedly rejects local advertisements after the enterprise appends its own AS number twice in an outbound policy. The decisive check for the current issue is: The intended extended-community values appear on the received route and relevant policies match them.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests

SPECIAL OFFER: GET 10% OFF
This is ONE TIME OFFER

You save
10%

Enter Your Email Address to Receive Your 10% Off Discount Code

SPECIAL OFFER: GET 10% OFF

You save
10%

Use Discount Code:

A confirmation link was sent to your e-mail.

Please check your mailbox for a message from support@examlabs.com and follow the directions.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your email address below to get started with our interactive software demo of your free trial.

  • Realistic exam simulation and exam editor with preview functions
  • Whole exam in a single file with several different question types
  • Customizable exam-taking mode & detailed score reports