You save $69.98
300-415 Premium Bundle
- Premium File 480 Questions & Answers
- Last Update: Nov 11, 2026
- Training Course 112 Lectures
- Study Guide 874 Pages
You save $69.98
A Catalyst SD-WAN operations review encounters this case: A company wants branches to reach headquarters servers but forbids direct branch-to-branch sessions. What failure mode is MOST directly associated with leaving it uncorrected?
Full-mesh OMP route distribution can violate a hub-only traffic topology requirement. Centralized topology policies govern permitted reachability across SD-WAN service VPNs. The recommended mitigation is: Design a hub-and-spoke overlay route topology with selected site lists and allowed VPN routes.
Assuming a transport VPN default route automatically provides NAT to every service VPN can break DIA. That risk applies mainly to a different case: A service VPN needs direct internet access, but the route to the ISP is visible only inside VPN 0.
Mixing sensitive customer services into VPN 0 defeats the intended separation of underlay and tenant data. That risk applies mainly to a different case: A transport network engineer proposes placing all customer VRF interfaces into VPN 0 because it is already globally reachable.
Transport connectivity does not automatically grant service VPN route visibility between tenants. That risk applies mainly to a different case: A new branch can reach a hub's external service VPN but not a second shared-services VPN.
A Catalyst SD-WAN operations review encounters this case: A Router is already attached to a legacy device template when a manager attempts to add it to a configuration group. What failure mode is MOST directly associated with leaving it uncorrected?
Concurrent ownership assumptions between old templates and configuration groups can cause rejected deployment. An SD-WAN Edge is typically managed by either a configuration group or a classic device template, not both. The recommended mitigation is: Choose the supported management method and migrate the device association rather than using both simultaneously.
Resetting WAN Edge hardware does not address a Controller filtering OMP prefixes. That risk applies mainly to a different case: A Controller has route advertisements but an Edge's OMP route table shows no routes for a particular customer VPN.
Creating a policy object without device or site attachment may have no traffic effect. That risk applies mainly to a different case: A network team publishes a policy group but assumes the rule is active on every WAN Edge by default.
Leaving unique interface addresses as global values can create duplicate networks across branches. That risk applies mainly to a different case: A configuration group includes a system profile but an internet interface's IP address must vary by site.
An engineer proposes this Catalyst SD-WAN remedy: Use a supported data policy service-insertion action and appropriate service reachability. The triggering scenario is: A security team wants branch traffic for one application redirected through a central inspection service. Which underlying SD-WAN behavior BEST explains the response?
Data policies can selectively steer or redirect matched flows through service-chain paths. This technical mechanism explains why the recommended action works: Use a supported data policy service-insertion action and appropriate service reachability. A successful deployment should show: A controlled application session traverses the inspected service before arriving at the target network.
AAR policies evaluate eligible path-quality measurements and apply configured fallback behavior when needed. This principle is associated more closely with another situation: A branch has application-aware policy defined but all paths fail to meet a strict loss threshold.
SD-WAN data policies must be applied to appropriate sites and traffic directions to affect flows. This principle is associated more closely with another situation: A policy is visible in Manager but no user traffic matches it on the designated WAN Edge.
Centralized data policy can match individual traffic flows and steer their forwarding independently of general route preference. This principle is associated more closely with another situation: A branch should steer a known backup application through MPLS while allowing routine internet browsing through local DIA.
After a controlled WAN fabric change, operations reports this action: Enable or review Manager audit logs and configuration change history under appropriate privileges. The original case is: An auditor requires evidence of who changed a branch configuration and when it was deployed. Which specific measurement would justify closing the change ticket?
The record shows the approved user, target device, timestamp and relevant deployment operation. This observable result validates the corrective action: Enable or review Manager audit logs and configuration change history under appropriate privileges.
A controlled threshold breach creates the expected alarm with correct device identity. That observation would verify another change: A remote Edge suffers frequent interface errors and monitoring must alert staff before business applications fail. The expected result instead is: The record shows the approved user, target device, timestamp and relevant deployment operation.
The specific impaired application and transport candidate are identified despite overall Edge availability. That observation would verify another change: A help desk sees a user complaint about SaaS slowness but Manager reports that the Edge itself is online. The expected result instead is: The record shows the approved user, target device, timestamp and relevant deployment operation.
The report identifies MPLS-specific jitter, latency and loss instead of conflating all paths. That observation would verify another change: A branch's performance report contains overlapping data from multiple transport colors and cannot isolate MPLS problems. The expected result instead is: The record shows the approved user, target device, timestamp and relevant deployment operation.
An engineer proposes this Catalyst SD-WAN remedy: Update the device inventory and approved provisioning mapping for the replacement Edge. The triggering scenario is: A replacement WAN Edge is installed at a branch but the old router's serial remains authorized and the new serial is missing. Which underlying SD-WAN behavior BEST explains the response?
Cisco SD-WAN enrollment ties physical or virtual device identity to a managed authorization inventory. This technical mechanism explains why the recommended action works: Update the device inventory and approved provisioning mapping for the replacement Edge. A successful deployment should show: The new Edge is authorized and receives the correct site-specific configuration while the retired serial is removed.
Regional hub architectures aggregate branch services and need appropriate Edge and transport redundancy. This principle is associated more closely with another situation: A large regional distribution site must connect dozens of branches through two resilient regional WAN Edge nodes.
OMP route selection considers advertised path attributes and TLOC reachability to resolve VPN prefixes. This principle is associated more closely with another situation: A remote Edge has the same VPN prefix advertised through two WAN transport paths and needs predictable route selection.
WAN Edge onboarding includes both unique node identity and logical site membership. This principle is associated more closely with another situation: An administrator enrolls two routers at one campus but assigns a different site ID to each without intending separate sites.
A network engineer is asked to resolve this SD-WAN issue: A route is advertised with a transport locator, and an operator assumes the TLOC is merely the public interface IP address. What is the most appropriate first configuration or operational step?
Represent the TLOC by its system IP, transport color, and tunnel encapsulation attributes when inspecting overlay routes. This is the targeted action for the stated case: A route is advertised with a transport locator, and an operator assumes the TLOC is merely the public interface IP address. The specific technical reason is: A TLOC identifies a WAN Edge transport endpoint using system IP, color, and encapsulation rather than an IP alone. Verification should demonstrate: The controller and edge agree on a transport locator with the expected system IP, color, and encapsulation.
Check version-specific feature support and platform compatibility before applying one common design. This would help with a different network situation: A team plans to mix virtual and physical Catalyst WAN Edges and assumes every platform supports identical features.
Separate DTLS or TLS control connections from the WAN Edge data-plane tunnel design. This would help with a different network situation: A WAN architect labels all Controller-to-Edge signaling as ordinary application data across the IPsec overlay.
Use the SD-WAN Controller for OMP route distribution and reserve the Validator for orchestration and discovery. This would help with a different network situation: A new branch can contact the public SD-WAN Validator, but the engineer mistakenly expects that component to distribute all branch routes.
Consider this Catalyst SD-WAN operating scenario: A WAN link carries interactive voice alongside large file transfers and voice packets wait too long in normal queues. Which corrective response most directly meets the requirement?
Configure an appropriate priority queue and scheduling policy for the verified voice traffic class. This is the targeted action for the stated case: A WAN link carries interactive voice alongside large file transfers and voice packets wait too long in normal queues. The specific technical reason is: QoS scheduling and queuing allocate transmission opportunities among packet classes during congestion. Verification should demonstrate: Under controlled congestion, voice receives the intended low-delay treatment and other traffic remains bounded.
Apply an appropriate policing policy to the guest class with a documented excess-action behavior. This would help with a different network situation: A guest service must be capped at a fixed rate and traffic above the threshold should be discarded rather than queued.
Design redundant supported SIG tunnel endpoints and verify route preference or failover. This would help with a different network situation: A cloud security tunnel to the primary SIG endpoint fails, yet the branch has a healthy backup internet circuit.
Shape outbound traffic to the subscribed effective bandwidth before the provider bottleneck. This would help with a different network situation: An ISP circuit is sold at 100 Mbps but the WAN Edge physical port transmits at 1 Gbps and causes provider-side drops.
A fabric administrator recommends the following change: Inspect OMP peer state, local advertisement and inbound centralized control-policy filtering. The triggering scenario is: An Edge reports established control connections but no remote service prefixes appear in its OMP table. Which underlying SD-WAN behavior BEST explains the response?
Control-channel establishment and OMP routing exchange are distinct troubleshooting stages. This technical mechanism explains why the recommended action works: Inspect OMP peer state, local advertisement and inbound centralized control-policy filtering. A successful deployment should show: The Controller exchanges approved VPN routes and the Edge receives intended OMP advertisements.
Controller control-connection longevity depends on stable transport, NAT and authenticated secure session state. This principle is associated more closely with another situation: A site loses Controller peers every few minutes even though its WAN circuit stays physically up.
Control-plane security verification must succeed before OMP sessions can distribute routes. This principle is associated more closely with another situation: A Controller displays the Edge certificate as invalid even though the fabric underlay has no packet loss.
Hosted controller deployments reduce enterprise infrastructure hosting while retaining fabric integration requirements. This principle is associated more closely with another situation: An enterprise selects Cisco-hosted controllers and asks who performs the base platform provisioning for the management and control nodes.
The team applies this planned Catalyst SD-WAN change: Assess controller transport paths, independent reachability, and site-level redundancy for on-premises placement. The original case is: A regional operator proposes controller redundancy but provides no plan for network isolation between data centers. What observation most directly verifies the intended behavior?
A controlled data-center link failure leaves WAN Edges connected to surviving authorized Controllers. This observable result validates the corrective action: Assess controller transport paths, independent reachability, and site-level redundancy for on-premises placement.
Manager, Validator, and Controllers boot on the approved hypervisor and present usable management services. That observation would verify another change: A company must operate its own SD-WAN Controllers in a private virtualization cluster. The expected result instead is: A controlled data-center link failure leaves WAN Edges connected to surviving authorized Controllers.
After correcting the identity fault, the Edge establishes authenticated control peers without interface changes. That observation would verify another change: A Controller displays the Edge certificate as invalid even though the fabric underlay has no packet loss. The expected result instead is: A controlled data-center link failure leaves WAN Edges connected to surviving authorized Controllers.
A planned host loss leaves the required controller services functioning at supported scale. That observation would verify another change: An on-premises controller cluster loses quorum after two virtual nodes share one physical failure domain. The expected result instead is: A controlled data-center link failure leaves WAN Edges connected to surviving authorized Controllers.
After a controlled WAN fabric change, operations reports this action: Create distinct service VPN membership and scoped data and control policies for the two traffic classes. The original case is: A policy intends to keep hospital telemetry isolated from guest browsing even though both use the same internet circuit. Which specific measurement would justify closing the change ticket?
Telemetry routes and policies remain separate from guest routing over the same transport interface. This observable result validates the corrective action: Create distinct service VPN membership and scoped data and control policies for the two traffic classes.
Cloud Edge and approved branches exchange only the new tenant VPN prefixes. That observation would verify another change: A cloud branch is assigned to a new customer VPN but the Controller continues to distribute only the default service VPN. The expected result instead is: Telemetry routes and policies remain separate from guest routing over the same transport interface.
After internet impairment, voice traffic selects the eligible MPLS path based on measured tunnel quality. That observation would verify another change: VoIP sessions suffer high jitter on internet while MPLS has lower latency and less packet loss. The expected result instead is: Telemetry routes and policies remain separate from guest routing over the same transport interface.
Customer prefixes remain confined to authorized service routing tables while transport control stays operational. That observation would verify another change: A transport network engineer proposes placing all customer VRF interfaces into VPN 0 because it is already globally reachable. The expected result instead is: Telemetry routes and policies remain separate from guest routing over the same transport interface.
A Cisco Catalyst SD-WAN deployment engineer is handling this requirement: An engineer sees an OMP TLOC route and concludes that it is itself a customer's service-VPN network prefix. Which action BEST addresses the situation?
Distinguish OMP TLOC advertisements from vRoutes that identify service-side VPN prefixes. This is the targeted action for the stated case: An engineer sees an OMP TLOC route and concludes that it is itself a customer's service-VPN network prefix. The specific technical reason is: OMP distributes distinct overlay route types for service prefixes and transport locator reachability. Verification should demonstrate: The route table shows customer VPN prefixes separately from transport reachability advertised as TLOCs.
Use application-experience telemetry to choose the better qualified SaaS egress rather than shortest geography. This would help with a different network situation: Cloud OnRamp for SaaS reports that a nearby direct-internet egress is worse for an application than a regional gateway.
Separate DTLS or TLS control connections from the WAN Edge data-plane tunnel design. This would help with a different network situation: A WAN architect labels all Controller-to-Edge signaling as ordinary application data across the IPsec overlay.
Design the Cisco Catalyst SD-WAN Multi-Region Fabric with appropriate core and border-router placement. This would help with a different network situation: Two geographic regions must retain local routing while exchanging selected inter-region routes through a backbone.
or Guarantee your success by buying the full version which covers the full latest pool of questions. (480 Questions, Last Updated on Nov 11, 2026)
Please check your mailbox for a message from support@examlabs.com and follow the directions.