You save $69.98
300-415 Premium Bundle
- Premium File 480 Questions & Answers
- Last Update: Nov 11, 2026
- Training Course 112 Lectures
- Study Guide 874 Pages
You save $69.98
A Cisco Catalyst SD-WAN deployment engineer is handling this requirement: An engineer sees an OMP TLOC route and concludes that it is itself a customer's service-VPN network prefix. Which action BEST addresses the situation?
Distinguish OMP TLOC advertisements from vRoutes that identify service-side VPN prefixes. This is the targeted action for the stated case: An engineer sees an OMP TLOC route and concludes that it is itself a customer's service-VPN network prefix. The specific technical reason is: OMP distributes distinct overlay route types for service prefixes and transport locator reachability. Verification should demonstrate: The route table shows customer VPN prefixes separately from transport reachability advertised as TLOCs.
Use application-experience telemetry to choose the better qualified SaaS egress rather than shortest geography. This would help with a different network situation: Cloud OnRamp for SaaS reports that a nearby direct-internet egress is worse for an application than a regional gateway.
Separate DTLS or TLS control connections from the WAN Edge data-plane tunnel design. This would help with a different network situation: A WAN architect labels all Controller-to-Edge signaling as ordinary application data across the IPsec overlay.
Design the Cisco Catalyst SD-WAN Multi-Region Fabric with appropriate core and border-router placement. This would help with a different network situation: Two geographic regions must retain local routing while exchanging selected inter-region routes through a backbone.
Consider this Catalyst SD-WAN operating scenario: A network engineer needs to drop a malicious traffic class at ingress before it enters the overlay. Which corrective response most directly meets the requirement?
Apply an appropriate localized or centralized data filtering policy with the correct ingress direction. This is the targeted action for the stated case: A network engineer needs to drop a malicious traffic class at ingress before it enters the overlay. The specific technical reason is: Data policies can match and drop packets at the forwarding plane based on configured conditions. Verification should demonstrate: Matched malicious test traffic increments drop counters while legitimate traffic continues.
Bind the SLA class to the intended AAR policy and activate it at the appropriate sites and VPNs. This would help with a different network situation: A network operator creates a new latency SLA but never associates it with any application traffic policy.
Verify that the data policy is activated and applied to the correct site, VPN, and direction. This would help with a different network situation: A policy is visible in Manager but no user traffic matches it on the designated WAN Edge.
Configure direct internet access with the appropriate service VPN route, NAT and security policy. This would help with a different network situation: A remote office has a public internet circuit but all web traffic hairpins through headquarters by default.
The team suggests this solution: Use control policy for OMP routes and a suitable traffic data policy for application-packet treatment. The triggering scenario is: An operator expects a controller policy to reroute an already-forwarded packet based on a URL hostname. Which underlying SD-WAN behavior BEST explains the response?
SD-WAN control policies act on distributed routing information rather than per-packet application payloads. This technical mechanism explains why the recommended action works: Use control policy for OMP routes and a suitable traffic data policy for application-packet treatment. A successful deployment should show: A test shows route advertisement changes under control policy while URL/flow matching occurs through packet policy.
Centralized topology policies govern permitted reachability across SD-WAN service VPNs. This principle is associated more closely with another situation: A company wants branches to reach headquarters servers but forbids direct branch-to-branch sessions.
Central control policies can explicitly reject or accept matched OMP routing updates. This principle is associated more closely with another situation: An SD-WAN Controller accepts an OMP route from an untrusted segment, exposing it to unrelated branch sites.
Overlay topology is shaped by centralized control-plane route distribution and site membership. This principle is associated more closely with another situation: A hub-spoke topology is requested without relying on every site manually building static routes.
A Cisco SD-WAN deployment has completed the following step: Submit the CSR through the supported PKI workflow and install the resulting signed certificate. The original case is: An SD-WAN Manager generates a CSR for a new Controller but the administrator assumes it is already trusted. Which test result provides the strongest evidence that the change succeeded?
The Manager shows a valid signed Controller certificate and secure control authentication succeeds. This observable result validates the corrective action: Submit the CSR through the supported PKI workflow and install the resulting signed certificate.
The Edge resolves the correct Validator target and opens the supported secure control connection. That observation would verify another change: A new branch cannot locate the cloud-hosted Validator because the provisioned hostname resolves to an obsolete address. The expected result instead is: The Manager shows a valid signed Controller certificate and secure control authentication succeeds.
The Controller recognizes the new Edge serial and its secure session is admitted. That observation would verify another change: A network operator imports Edge serial numbers into Manager but never distributes the updated list to the Controllers. The expected result instead is: The Manager shows a valid signed Controller certificate and secure control authentication succeeds.
Mutual authentication succeeds with certificates chaining to the configured trusted enterprise CA. That observation would verify another change: An enterprise uses its own certificate authority and the Controllers reject the custom device certificate chain. The expected result instead is: The Manager shows a valid signed Controller certificate and secure control authentication succeeds.
The team suggests this solution: Configure an application-aware stateful enterprise firewall rule with the intended application match. The triggering scenario is: A branch wants to allow collaboration applications but block an unauthorized remote-access application even on TCP 443. Which underlying SD-WAN behavior BEST explains the response?
Application-aware enterprise firewalls classify traffic beyond basic five-tuple port and address matching. This technical mechanism explains why the recommended action works: Configure an application-aware stateful enterprise firewall rule with the intended application match. A successful deployment should show: The permitted collaboration app succeeds and the prohibited app generates matching firewall deny events.
TCP optimization targets protocol behavior and round-trip overhead that affect application experience. This principle is associated more closely with another situation: A high-latency WAN hosts an application with numerous small TCP exchanges and poor response time.
URL filtering evaluates requested destinations using web categories and reputation information. This principle is associated more closely with another situation: Users must be denied access to known phishing domains and selected nonbusiness website categories.
Stateful application-aware firewall logging ties denied traffic to policy matches and application identity. This principle is associated more closely with another situation: A remote site's embedded firewall is installed but the administrator cannot tell which policy rule blocked a permitted SaaS application.
Consider the following branch WAN issue: An ISP circuit is sold at 100 Mbps but the WAN Edge physical port transmits at 1 Gbps and causes provider-side drops. What is the most relevant operational risk in this situation?
A router can overwhelm a slower provider circuit if its edge shaping is not aligned to the service rate. Traffic shaping buffers and schedules excess packets to smooth bursts to a configured transmit rate. The recommended mitigation is: Shape outbound traffic to the subscribed effective bandwidth before the provider bottleneck.
Sending DIA straight to the public internet can bypass the organization's former central inspection path. That risk applies mainly to a different case: A company moves web traffic to local DIA but wants cloud-hosted secure web inspection rather than a firewall at every branch.
Assuming one fixed shaper rate matches all radio conditions can cause repeated loss or unused capacity. That risk applies mainly to a different case: A branch's available LTE uplink bandwidth fluctuates and a fixed static shaper wastes capacity or causes carrier loss.
A local priority classifier with no surviving marking can lose differentiated treatment along the path. That risk applies mainly to a different case: A branch application is correctly classified but downstream routers give it best-effort treatment despite its priority.
Consider the following branch WAN issue: An operations team wants an out-of-band management interface isolated from business service LANs. What is the most relevant operational risk in this situation?
Merging device management with customer data needlessly expands security and troubleshooting exposure. Cisco SD-WAN separates management and service routing contexts from the VPN 0 transport interface. The recommended mitigation is: Use the appropriate SD-WAN management VPN or dedicated management design rather than a customer traffic VPN.
Assuming up/down tunnel state fully represents usable voice quality can lead to persistent poor calls. That risk applies mainly to a different case: An MPLS tunnel and internet tunnel are up, yet VoIP MOS drops during bursts of jitter on one path.
Treating all cloud-destined traffic as the same category can bypass required security inspection. That risk applies mainly to a different case: A security team insists that public-cloud workloads use inspected regional egress while ordinary user SaaS traffic may use local DIA.
Adding duplicate OMP routes cannot repair an unreachable peer transport endpoint. That risk applies mainly to a different case: A remote Edge has an OMP route but cannot build a usable tunnel because the peer transport is unreachable over the underlay.
A Cisco Catalyst SD-WAN deployment engineer is handling this requirement: A maintenance team must upgrade 300 WAN Edge routers without transferring individual software images manually. Which action BEST addresses the situation?
Stage an approved software image in SD-WAN Manager's repository and select supported deployment targets. This is the targeted action for the stated case: A maintenance team must upgrade 300 WAN Edge routers without transferring individual software images manually. The specific technical reason is: Manager maintains a software image repository and coordinates supported WAN Edge upgrade workflows. Verification should demonstrate: The selected fleet downloads the validated image and reports staged or installed versions centrally.
Schedule a controlled install and activation workflow, with pilot devices and intended reboot behavior. This would help with a different network situation: A new firmware image is published but the operator assumes uploading it to Manager immediately activates it on every Edge.
Enable or review Manager audit logs and configuration change history under appropriate privileges. This would help with a different network situation: An auditor requires evidence of who changed a branch configuration and when it was deployed.
Sequence device image upgrades and validate forwarding after each peer change. This would help with a different network situation: An upgrade is planned across redundant Edges, and the owner wants to avoid losing both routers at the same campus simultaneously.
An engineer proposes this Catalyst SD-WAN remedy: Validate the supported Cloud OnRamp for Multicloud cloud and interconnect topology, segmentation, and routing. The triggering scenario is: A multicloud migration combines a provider's private WAN interconnect and a regular public internet transport. Which underlying SD-WAN behavior BEST explains the response?
Multicloud interconnect options differ in provider attachment, routing domain and transport characteristics. This technical mechanism explains why the recommended action works: Validate the supported Cloud OnRamp for Multicloud cloud and interconnect topology, segmentation, and routing. A successful deployment should show: Both private and internet transport flows follow the intended cloud interconnect boundaries.
The Validator orchestrates secure control discovery while the SD-WAN Controller exchanges OMP control-plane routes. This principle is associated more closely with another situation: A new branch can contact the public SD-WAN Validator, but the engineer mistakenly expects that component to distribute all branch routes.
Cloud OnRamp for SaaS can compare application performance over multiple candidate transports. This principle is associated more closely with another situation: A branch with two ISPs must avoid a degraded internet path when reaching a critical software-as-a-service tenant.
Cloud OnRamp for Colocation integrates SD-WAN connectivity with shared colocation service functions. This principle is associated more closely with another situation: A branch needs a centralized security and service-chain location at a partner colocation facility before reaching external services.
The team applies this planned Catalyst SD-WAN change: Verify that the branch is an authorized member of the second VPN and that its routes are exported. The original case is: A new branch can reach a hub's external service VPN but not a second shared-services VPN. What observation most directly verifies the intended behavior?
The correct second VPN's routes appear after membership and control-policy corrections. This observable result validates the corrective action: Verify that the branch is an authorized member of the second VPN and that its routes are exported.
Branches can access hub services but no direct spoke routing is installed. That observation would verify another change: A company wants branches to reach headquarters servers but forbids direct branch-to-branch sessions. The expected result instead is: The correct second VPN's routes appear after membership and control-policy corrections.
Customer prefixes remain confined to authorized service routing tables while transport control stays operational. That observation would verify another change: A transport network engineer proposes placing all customer VRF interfaces into VPN 0 because it is already globally reachable. The expected result instead is: The correct second VPN's routes appear after membership and control-policy corrections.
A pilot compares proposed path changes with actual application and BFD telemetry before expanding scope. That observation would verify another change: An operator expects an AI-driven predictive path recommendation to guarantee that every future path failure is prevented. The expected result instead is: The correct second VPN's routes appear after membership and control-policy corrections.
A network engineer is asked to resolve this SD-WAN issue: A branch has application-aware policy defined but all paths fail to meet a strict loss threshold. What is the most appropriate first configuration or operational step?
Review the SLA class and implement a supported fallback preference for cases where no path meets SLA. This is the targeted action for the stated case: A branch has application-aware policy defined but all paths fail to meet a strict loss threshold. The specific technical reason is: AAR policies evaluate eligible path-quality measurements and apply configured fallback behavior when needed. Verification should demonstrate: The application uses the documented backup behavior when all measured paths violate thresholds.
Create and attach a region-specific centralized control policy using the appropriate match lists. This would help with a different network situation: A team needs different control-plane behavior for one regional cluster without changing every site's routing.
Bind the SLA class to the intended AAR policy and activate it at the appropriate sites and VPNs. This would help with a different network situation: A network operator creates a new latency SLA but never associates it with any application traffic policy.
Use AI-driven predictive recommendations as supported decision input and validate policy and measured path results. This would help with a different network situation: An operator expects an AI-driven predictive path recommendation to guarantee that every future path failure is prevented.
or Guarantee your success by buying the full version which covers the full latest pool of questions. (480 Questions, Last Updated on Nov 11, 2026)
Please check your mailbox for a message from support@examlabs.com and follow the directions.