You save $69.98
300-415 Premium Bundle
- Premium File 480 Questions & Answers
- Last Update: Nov 11, 2026
- Training Course 112 Lectures
- Study Guide 874 Pages
You save $69.98
A Cisco Catalyst SD-WAN deployment engineer is handling this requirement: A WAN Edge upgrade completes on one router but not another, and the operator needs a reliable rollback decision. Which action BEST addresses the situation?
Review Manager upgrade task status, supported version compatibility and available rollback procedures. This is the targeted action for the stated case: A WAN Edge upgrade completes on one router but not another, and the operator needs a reliable rollback decision. The specific technical reason is: Software image operations require explicit verification, release compatibility checks and supported recovery paths. Verification should demonstrate: The failed router returns to an approved stable version or completes a supported retry with verified routing.
Stage an approved software image in SD-WAN Manager's repository and select supported deployment targets. This would help with a different network situation: A maintenance team must upgrade 300 WAN Edge routers without transferring individual software images manually.
Schedule a controlled install and activation workflow, with pilot devices and intended reboot behavior. This would help with a different network situation: A new firmware image is published but the operator assumes uploading it to Manager immediately activates it on every Edge.
Assign a Manager role with appropriate read-only monitoring privileges and test access. This would help with a different network situation: A new operations user must view SD-WAN alarms but must not push configurations or alter global policies.
An engineer proposes this Catalyst SD-WAN remedy: Verify cloud routing and supported virtual Edge or gateway route advertisement to the destination VPC or VNet. The triggering scenario is: A company uses Cloud OnRamp for IaaS but branch prefixes are missing from the hosted application's routing domain. Which underlying SD-WAN behavior BEST explains the response?
Cloud OnRamp for IaaS requires both overlay connectivity and appropriate cloud-side route propagation. This technical mechanism explains why the recommended action works: Verify cloud routing and supported virtual Edge or gateway route advertisement to the destination VPC or VNet. A successful deployment should show: Cloud route tables and Edge overlay routes show bidirectional reachability for authorized branch prefixes.
The Validator orchestrates secure control discovery while the SD-WAN Controller exchanges OMP control-plane routes. This principle is associated more closely with another situation: A new branch can contact the public SD-WAN Validator, but the engineer mistakenly expects that component to distribute all branch routes.
Colocation integration and SD-WAN policies can select which flows traverse service-function nodes. This principle is associated more closely with another situation: A network team must send only approved application categories through a colocation security stack, retaining other traffic on DIA.
Cloud OnRamp for Multicloud coordinates supported cloud networking and interconnect connectivity patterns. This principle is associated more closely with another situation: An enterprise must interconnect two cloud providers and several SD-WAN sites through a managed global backbone.
A Cisco Catalyst SD-WAN deployment engineer is handling this requirement: An ISP circuit is sold at 100 Mbps but the WAN Edge physical port transmits at 1 Gbps and causes provider-side drops. Which action BEST addresses the situation?
Shape outbound traffic to the subscribed effective bandwidth before the provider bottleneck. This is the targeted action for the stated case: An ISP circuit is sold at 100 Mbps but the WAN Edge physical port transmits at 1 Gbps and causes provider-side drops. The specific technical reason is: Traffic shaping buffers and schedules excess packets to smooth bursts to a configured transmit rate. Verification should demonstrate: Measured egress traffic respects the configured rate and ISP policer drop counters decline.
Configure an appropriate priority queue and scheduling policy for the verified voice traffic class. This would help with a different network situation: A WAN link carries interactive voice alongside large file transfers and voice packets wait too long in normal queues.
Apply an appropriate policing policy to the guest class with a documented excess-action behavior. This would help with a different network situation: A guest service must be capped at a fixed rate and traffic above the threshold should be discarded rather than queued.
Evaluate supported Data Redundancy Elimination with appropriate peers and application eligibility. This would help with a different network situation: A file-transfer workload repeatedly sends substantially identical large data blocks over a constrained WAN.
The team applies this planned Catalyst SD-WAN change: Compare Controller reachability, credentials, and affinity or policy settings for the failed peer. The original case is: One WAN Edge connects to Controller A but not Controller B, both advertised for redundancy. What observation most directly verifies the intended behavior?
Both intended Controllers appear as authorized established peers after the specific mismatch is corrected. This observable result validates the corrective action: Compare Controller reachability, credentials, and affinity or policy settings for the failed peer.
The Edge is listed as authorized and successfully authenticates to its designated Controllers. That observation would verify another change: A newly delivered Edge has a valid certificate but its serial number is absent from the fabric's authorized device inventory. The expected result instead is: Both intended Controllers appear as authorized established peers after the specific mismatch is corrected.
The diagnostics identify whether discovery, transport routing, or secure handshake is failing. That observation would verify another change: A branch can ping its transport default gateway but control connections show no established peers. The expected result instead is: Both intended Controllers appear as authorized established peers after the specific mismatch is corrected.
The Controller exchanges approved VPN routes and the Edge receives intended OMP advertisements. That observation would verify another change: An Edge reports established control connections but no remote service prefixes appear in its OMP table. The expected result instead is: Both intended Controllers appear as authorized established peers after the specific mismatch is corrected.
A fabric administrator recommends the following change: Design scoped colocation service insertion and traffic policy matching approved application flows. The triggering scenario is: A network team must send only approved application categories through a colocation security stack, retaining other traffic on DIA. Which underlying SD-WAN behavior BEST explains the response?
Colocation integration and SD-WAN policies can select which flows traverse service-function nodes. This technical mechanism explains why the recommended action works: Design scoped colocation service insertion and traffic policy matching approved application flows. A successful deployment should show: Only designated traffic traverses the security service-chain while other applications keep their chosen breakout.
BFD monitors the liveliness and quality of the data-plane transport tunnels independently of OMP connectivity. This principle is associated more closely with another situation: A site has working Controller connections, but an application tunnel stops passing packets when the circuit degrades.
SaaS application experience telemetry assesses application reachability and performance beyond raw circuit pings. This principle is associated more closely with another situation: A SaaS performance analyst sees good generic ICMP response to the internet but repeated poor cloud application transactions.
Cloud OnRamp service variants address different traffic destinations and require suitable policy boundaries. This principle is associated more closely with another situation: A security team insists that public-cloud workloads use inspected regional egress while ordinary user SaaS traffic may use local DIA.
The team applies this planned Catalyst SD-WAN change: Correlate control-connection flaps with underlying packet loss, NAT mapping expiration and certificate events. The original case is: A site loses Controller peers every few minutes even though its WAN circuit stays physically up. What observation most directly verifies the intended behavior?
Connection history identifies the triggering condition and control sessions remain stable after remediation. This observable result validates the corrective action: Correlate control-connection flaps with underlying packet loss, NAT mapping expiration and certificate events.
The Controller has valid identity and an established secure connection to the Validator. That observation would verify another change: A new Controller can reach the Manager but cannot build the expected secure session to its Validator. The expected result instead is: Connection history identifies the triggering condition and control sessions remain stable after remediation.
The Edge accepts authorized controllers and no longer fails certificate trust validation. That observation would verify another change: An administrator loads a certificate with the wrong organizational root onto only one WAN Edge. The expected result instead is: Connection history identifies the triggering condition and control sessions remain stable after remediation.
Both intended Controllers appear as authorized established peers after the specific mismatch is corrected. That observation would verify another change: One WAN Edge connects to Controller A but not Controller B, both advertised for redundancy. The expected result instead is: Connection history identifies the triggering condition and control sessions remain stable after remediation.
The team applies this planned Catalyst SD-WAN change: Sequence device image upgrades and validate forwarding after each peer change. The original case is: An upgrade is planned across redundant Edges, and the owner wants to avoid losing both routers at the same campus simultaneously. What observation most directly verifies the intended behavior?
One Edge continues carrying authorized site traffic while the other is upgraded and tested. This observable result validates the corrective action: Sequence device image upgrades and validate forwarding after each peer change.
The pilot Edge reports the new active version only after the planned installation and activation. That observation would verify another change: A new firmware image is published but the operator assumes uploading it to Manager immediately activates it on every Edge. The expected result instead is: One Edge continues carrying authorized site traffic while the other is upgraded and tested.
The change list identifies target Edges, active versions and outstanding alarms before deployment. That observation would verify another change: A network owner wants a single place to review inventory and software state before a scheduled branch change. The expected result instead is: One Edge continues carrying authorized site traffic while the other is upgraded and tested.
The selected fleet downloads the validated image and reports staged or installed versions centrally. That observation would verify another change: A maintenance team must upgrade 300 WAN Edge routers without transferring individual software images manually. The expected result instead is: One Edge continues carrying authorized site traffic while the other is upgraded and tested.
A Cisco SD-WAN deployment has completed the following step: Assign and verify appropriate SD-WAN transport colors on each tunnel interface. The original case is: A fabric uses MPLS and internet transports and must prevent internet-only endpoints from being mistaken for private MPLS circuits. Which test result provides the strongest evidence that the change succeeded?
OMP transport advertisements and tunnel candidates show the correct color for each circuit. This observable result validates the corrective action: Assign and verify appropriate SD-WAN transport colors on each tunnel interface.
Monitored SaaS path-quality scores guide users toward a transport meeting application experience targets. That observation would verify another change: Users in several regions report intermittent Microsoft 365 performance despite all branch broadband circuits appearing up. The expected result instead is: OMP transport advertisements and tunnel candidates show the correct color for each circuit.
Branch-to-branch payload reaches the peer Edge directly while Controllers only distribute reachability and policy. That observation would verify another change: A branch has two controllers, and the operator expects routers to form data-plane tunnels through the controllers. The expected result instead is: OMP transport advertisements and tunnel candidates show the correct color for each circuit.
BFD reports the actual data tunnel health and the unavailable path is no longer preferred for traffic. That observation would verify another change: A site has working Controller connections, but an application tunnel stops passing packets when the circuit degrades. The expected result instead is: OMP transport advertisements and tunnel candidates show the correct color for each circuit.
Consider the following branch WAN issue: VoIP sessions suffer high jitter on internet while MPLS has lower latency and less packet loss. What is the most relevant operational risk in this situation?
Static best-prefix routing ignores live path performance and can leave voice on a degraded tunnel. Application-aware routing uses BFD loss, latency and jitter measurements against configured SLA thresholds. The recommended mitigation is: Configure an application-aware routing SLA class and prefer TLOCs meeting voice performance targets.
A VPN membership leak can expose sensitive internal routing to untrusted guest contexts. That risk applies mainly to a different case: A remote branch advertises a private finance prefix into a public guest service VPN by mistake.
Applying an indiscriminate global transport switch can disrupt other applications unnecessarily. That risk applies mainly to a different case: A video conference should use broadband normally but MPLS when broadband exceeds a latency threshold.
Overly sensitive path switching can worsen session quality even when alternate paths exist. That risk applies mainly to a different case: AAR path changes oscillate as transport loss fluctuates around a threshold during busy hours.
The team applies this planned Catalyst SD-WAN change: Plan Cloud OnRamp for IaaS connectivity with the supported cloud gateways or virtual Edge components. The original case is: A company hosts enterprise applications in a public IaaS virtual network and wants the SD-WAN fabric to reach that workload securely. What observation most directly verifies the intended behavior?
Branch routes reach the cloud-hosted application over the intended secure overlay connection. This observable result validates the corrective action: Plan Cloud OnRamp for IaaS connectivity with the supported cloud gateways or virtual Edge components.
Monitored SaaS path-quality scores guide users toward a transport meeting application experience targets. That observation would verify another change: Users in several regions report intermittent Microsoft 365 performance despite all branch broadband circuits appearing up. The expected result instead is: Branch routes reach the cloud-hosted application over the intended secure overlay connection.
The same overlapping prefix is reachable in its intended VPN context without leaking between tenants. That observation would verify another change: A branch design uses overlapping LAN prefixes in two tenants and fears that one shared transport network merges their traffic. The expected result instead is: Branch routes reach the cloud-hosted application over the intended secure overlay connection.
The measured cross-cloud traffic follows the approved interconnect path and reaches intended workloads. That observation would verify another change: An enterprise must interconnect two cloud providers and several SD-WAN sites through a managed global backbone. The expected result instead is: Branch routes reach the cloud-hosted application over the intended secure overlay connection.
Consider this Catalyst SD-WAN operating scenario: Cloud OnRamp for SaaS reports that a nearby direct-internet egress is worse for an application than a regional gateway. Which corrective response most directly meets the requirement?
Use application-experience telemetry to choose the better qualified SaaS egress rather than shortest geography. This is the targeted action for the stated case: Cloud OnRamp for SaaS reports that a nearby direct-internet egress is worse for an application than a regional gateway. The specific technical reason is: SaaS path optimization relies on measured performance across available internet and gateway paths. Verification should demonstrate: Application probes and user transactions demonstrate better latency and loss on the selected egress.
Enable supported Cloud OnRamp for SaaS path assessment with the right application and transport candidates. This would help with a different network situation: A branch with two ISPs must avoid a degraded internet path when reaching a critical software-as-a-service tenant.
Use the appropriate Multi-Region Fabric inter-region border controls and route policy design. This would help with a different network situation: The enterprise spans three regional fabrics, and an administrator wants to suppress needless routes outside their home region.
Use Cloud OnRamp for SaaS with appropriate application performance monitoring and local path selection. This would help with a different network situation: Users in several regions report intermittent Microsoft 365 performance despite all branch broadband circuits appearing up.
or Guarantee your success by buying the full version which covers the full latest pool of questions. (480 Questions, Last Updated on Nov 11, 2026)
Please check your mailbox for a message from support@examlabs.com and follow the directions.