Pass Juniper JN0-364 Exam in First Attempt Easily
Real Juniper JN0-364 Exam Questions, Accurate & Verified Answers As Experienced in the Actual Test!

Verified by experts

JN0-364 Premium File

  • 69 Questions & Answers
  • Last Update: Nov 4, 2026
$69.99 $76.99

Service Provider Routing and Switching, Specialist (JNCIS-SP) JN0-364 Practice Test 32

Question 310

Before changing configuration at Northline Communications, an engineer investigates: An intermittent control-plane firewall blocks one BGP packet class, and operators need to separate OPEN, KEEPALIVE, UPDATE and NOTIFICATION behavior. Which first diagnostic most directly tests the suspected cause?

  1. Inspect all candidate BGP path attributes in selection order, especially local preference and AS-path list, rather than only ping latency.
  2. Inspect the prefix's community list before and after import/export policy and compare route term ordering.
  3. Inspect neighbor flap reasons, hold timers and a TCP/179 packet trace to identify which BGP message type fails.
  4. Check source route active state and `show route advertising-protocol bgp` with ordered export terms for the exact prefix.

Correct answer: C

Explanation of each choice

A.

This check may help with another root cause, for example: Two eBGP routes have equal earlier BGP decision attributes and the operator needs to explain why a path with fewer AS numbers is preferred. It does not test the first failed condition; start with: Inspect neighbor flap reasons, hold timers and a TCP/179 packet trace to identify which BGP message type fails.

B.

That evidence could be normal while the reported defect persists. It is aimed at: A carrier tags customer routes with a standard BGP community to drive downstream policy, but the tag never appears beyond the ingress edge. Instead inspect: Inspect neighbor flap reasons, hold timers and a TCP/179 packet trace to identify which BGP message type fails.

C.

Inspect neighbor flap reasons, hold timers and a TCP/179 packet trace to identify which BGP message type fails. BGP liveness is maintained by KEEPALIVE even when route advertisements do not change.

D.

This check may help with another root cause, for example: A transit customer prefix is locally active but never advertised to an approved eBGP neighbor because the export policy's final term rejects it. It does not test the first failed condition; start with: Inspect neighbor flap reasons, hold timers and a TCP/179 packet trace to identify which BGP message type fails.

Question 311

At ValleyCross Fiber, a service provider router shows this failure: A received iBGP route is visible in inet.0 but inactive because its BGP next hop cannot be resolved through the IGP. What is the best targeted configuration or operations action?

  1. Attach and match the intended BGP community through correctly ordered routing policy, and validate propagation and neighbor policy handling.
  2. Restore reachability to the advertised BGP next-hop address through the correct IGP or appropriate next-hop handling, then verify route eligibility.
  3. Implement a supported iBGP full mesh or route-reflector topology and verify correct client/peer advertisements and next-hop reachability.
  4. Use an appropriate externally communicated MED or an agreed inbound routing policy and verify the neighbor's comparison behavior and limitations.

Correct answer: B

Explanation of each choice

A.

The other action is relevant when A carrier tags customer routes with a standard BGP community to drive downstream policy, but the tag never appears beyond the ingress edge. The current case instead requires: Restore reachability to the advertised BGP next-hop address through the correct IGP or appropriate next-hop handling, then verify route eligibility. The distinction is: Changing local preference does not make a BGP route usable if its next-hop address is unresolved.

B.

Restore reachability to the advertised BGP next-hop address through the correct IGP or appropriate next-hop handling, then verify route eligibility. The case-specific reason is: Changing local preference does not make a BGP route usable if its next-hop address is unresolved. A direct acceptance test is: The exact BGP path becomes active once its next hop resolves and the forwarding table has a usable adjacency or recursive next hop.

C.

This action may apply to a different problem, for example: A BGP speaker learns a route from one iBGP peer but does not pass it to another internal peer, causing partial prefix visibility. It does not repair the stated failure boundary. The case-specific reason is: Changing local preference does not make a BGP route usable if its next-hop address is unresolved.

D.

The other action is relevant when An operator changes local preference on its own router expecting a remote AS to honor it, but the remote side never receives that attribute. The current case instead requires: Restore reachability to the advertised BGP next-hop address through the correct IGP or appropriate next-hop handling, then verify route eligibility. The distinction is: Changing local preference does not make a BGP route usable if its next-hop address is unresolved.

Question 312

A change auditor at ValleyCross Fiber must validate remediation of this finding: A received iBGP route is visible in inet.0 but inactive because its BGP next hop cannot be resolved through the IGP. Which test outcome is the strongest acceptance evidence?

  1. The RIB and forwarding entry show multiple eligible next hops for the prefix and independent flows use more than one path as designed.
  2. The required internal BGP speakers receive routes across the topology without iBGP re-advertisement violations or looped next hops.
  3. The neighbor receives only intended active advertised routes with correct attributes; internal and reserved prefixes are not leaked.
  4. The exact BGP path becomes active once its next hop resolves and the forwarding table has a usable adjacency or recursive next hop.

Correct answer: D

Explanation of each choice

A.

The observation confirms a different component's behavior. Its source context is: Two equal eligible BGP paths to a destination exist, but forwarding uses only the best path while the service design needs shared capacity. In this case the success criterion is: The exact BGP path becomes active once its next hop resolves and the forwarding table has a usable adjacency or recursive next hop.

B.

That check proves something else, such as: A provider adds more iBGP speakers without a route-reflector or full-mesh design and assumes iBGP will transitively flood routes. It could pass while the stated problem remains. The targeted evidence here is: The exact BGP path becomes active once its next hop resolves and the forwarding table has a usable adjacency or recursive next hop.

C.

This would be valid for another situation: A transit customer prefix is locally active but never advertised to an approved eBGP neighbor because the export policy's final term rejects it. It does not establish that the failing boundary in this scenario works; verify: The exact BGP path becomes active once its next hop resolves and the forwarding table has a usable adjacency or recursive next hop.

D.

The exact BGP path becomes active once its next hop resolves and the forwarding table has a usable adjacency or recursive next hop. Changing local preference does not make a BGP route usable if its next-hop address is unresolved.

Question 313

The operations training team at ValleyCross Fiber discusses this issue: A received iBGP route is visible in inet.0 but inactive because its BGP next hop cannot be resolved through the IGP. Which technical explanation matches the intended correction?

  1. BGP multipath allows multiple sufficiently equal eligible BGP paths to contribute forwarding next hops, subject to routing-policy and hardware constraints.
  2. A BGP route must have a resolvable next hop before it can become active and install usable forwarding state.
  3. BGP communities are transitive policy tags when preserved and permitted; they do not themselves impose forwarding without route-policy interpretation.
  4. Ordered Junos BGP export policies determine which eligible local routes are advertised to a BGP group or neighbor.

Correct answer: B

Explanation of each choice

A.

This explains a separate protocol behavior: Two equal eligible BGP paths to a destination exist, but forwarding uses only the best path while the service design needs shared capacity. In the current facts, the controlling mechanism is: A BGP route must have a resolvable next hop before it can become active and install usable forwarding state.

B.

A BGP route must have a resolvable next hop before it can become active and install usable forwarding state. The key distinction is: Changing local preference does not make a BGP route usable if its next-hop address is unresolved. Accordingly the remedy is: Restore reachability to the advertised BGP next-hop address through the correct IGP or appropriate next-hop handling, then verify route eligibility.

C.

That principle belongs to a different service stage: A carrier tags customer routes with a standard BGP community to drive downstream policy, but the tag never appears beyond the ingress edge. The directly relevant mechanism is: A BGP route must have a resolvable next hop before it can become active and install usable forwarding state.

D.

This explains a separate protocol behavior: An edge advertises unapproved internal prefixes after an operator broadens a BGP export term beyond the intended customer route set. In the current facts, the controlling mechanism is: A BGP route must have a resolvable next hop before it can become active and install usable forwarding state.

Question 314

At ValleyCross Fiber, a service acceptance review considers the unresolved issue: A received iBGP route is visible in inet.0 but inactive because its BGP next hop cannot be resolved through the IGP. Which operational exposure follows most directly?

  1. Routes are never exchanged with the partner, even if ICMP reachability tests across the physical link succeed.
  2. An unresolvable BGP route may be received but never forwarded, making the prefix unreachable to customers.
  3. A policy tag may be lost or misapplied, causing unintended route handling or loss of a contracted service path.
  4. Traffic may exit through the wrong carrier, producing inconsistent routing or unwanted transit cost across the AS.

Correct answer: B

Explanation of each choice

A.

It is a risk in another topology or protocol state: Two neighboring providers configured for eBGP have IP reachability but the BGP session remains Active because one side uses the wrong peer AS number. Here the most direct failure path is: An unresolvable BGP route may be received but never forwarded, making the prefix unreachable to customers.

B.

An unresolvable BGP route may be received but never forwarded, making the prefix unreachable to customers. The direct mitigation is: Restore reachability to the advertised BGP next-hop address through the correct IGP or appropriate next-hop handling, then verify route eligibility.

C.

That consequence is more closely associated with another deficiency, such as: A carrier tags customer routes with a standard BGP community to drive downstream policy, but the tag never appears beyond the ingress edge. The described fault instead exposes: An unresolvable BGP route may be received but never forwarded, making the prefix unreachable to customers.

D.

It is a risk in another topology or protocol state: A backbone operator needs to prefer a primary egress for all internal routers without changing the external partner's AS path length. Here the most direct failure path is: An unresolvable BGP route may be received but never forwarded, making the prefix unreachable to customers.

Question 315

Before changing configuration at ValleyCross Fiber, an engineer investigates: A received iBGP route is visible in inet.0 but inactive because its BGP next hop cannot be resolved through the IGP. Which first diagnostic most directly tests the suspected cause?

  1. Inspect the received route's next-hop field and `show route <next-hop>` resolution path, then check the IGP transport route.
  2. Check `show bgp neighbor` last-error/state and compare peer AS, local AS, neighbor address and TCP/179 reachability.
  3. Inspect received advertised routes, route-hidden reasons and the exact ordered import policy attached to the BGP group.
  4. Check source route active state and `show route advertising-protocol bgp` with ordered export terms for the exact prefix.

Correct answer: A

Explanation of each choice

A.

Inspect the received route's next-hop field and `show route <next-hop>` resolution path, then check the IGP transport route. Changing local preference does not make a BGP route usable if its next-hop address is unresolved.

B.

This check may help with another root cause, for example: A provider changed a partner's ASN, leaving the old `peer-as` on its Junos BGP group while TCP connection attempts continue. It does not test the first failed condition; start with: Inspect the received route's next-hop field and `show route <next-hop>` resolution path, then check the IGP transport route.

C.

That evidence could be normal while the reported defect persists. It is aimed at: A provider receives a malformed or unauthorized customer prefix yet it enters route selection after a loose import policy. Instead inspect: Inspect the received route's next-hop field and `show route <next-hop>` resolution path, then check the IGP transport route.

D.

The check diagnoses a different layer of service. Its source issue is: An edge advertises unapproved internal prefixes after an operator broadens a BGP export term beyond the intended customer route set. The relevant initial check is: Inspect the received route's next-hop field and `show route <next-hop>` resolution path, then check the IGP transport route.

Question 316

During a Junos network change at Oakbend Education, the engineer observes: A service route remains hidden after an eBGP-to-iBGP handoff; the internal router knows the prefix but not a path to its advertised next hop. Which remediation most directly fixes the described problem?

  1. Attach and match the intended BGP community through correctly ordered routing policy, and validate propagation and neighbor policy handling.
  2. Restore reachability to the advertised BGP next-hop address through the correct IGP or appropriate next-hop handling, then verify route eligibility.
  3. Use an appropriate externally communicated MED or an agreed inbound routing policy and verify the neighbor's comparison behavior and limitations.
  4. Adjust the neighbor's ordered BGP import policy to accept only authorized prefixes and expected attributes, then validate the received and accepted routes.

Correct answer: B

Explanation of each choice

A.

This action may apply to a different problem, for example: A neighbor's agreed selective-routing behavior fails because a community is added after the rejecting export term rather than before policy selection. It does not repair the stated failure boundary. The case-specific reason is: Changing local preference does not make a BGP route usable if its next-hop address is unresolved.

B.

Restore reachability to the advertised BGP next-hop address through the correct IGP or appropriate next-hop handling, then verify route eligibility. The case-specific reason is: Changing local preference does not make a BGP route usable if its next-hop address is unresolved. A direct acceptance test is: The exact BGP path becomes active once its next hop resolves and the forwarding table has a usable adjacency or recursive next hop.

C.

That would address a separate configuration fault: An operator changes local preference on its own router expecting a remote AS to honor it, but the remote side never receives that attribute. This stem identifies a different cause, corrected by: Restore reachability to the advertised BGP next-hop address through the correct IGP or appropriate next-hop handling, then verify route eligibility.

D.

This action may apply to a different problem, for example: A provider receives a malformed or unauthorized customer prefix yet it enters route selection after a loose import policy. It does not repair the stated failure boundary. The case-specific reason is: Changing local preference does not make a BGP route usable if its next-hop address is unresolved.

Question 317

The Junos team at Oakbend Education needs a success criterion for this defect: A service route remains hidden after an eBGP-to-iBGP handoff; the internal router knows the prefix but not a path to its advertised next hop. Which observed result most precisely confirms the intended repair?

  1. The exact BGP path becomes active once its next hop resolves and the forwarding table has a usable adjacency or recursive next hop.
  2. The neighbor receives only intended active advertised routes with correct attributes; internal and reserved prefixes are not leaked.
  3. The BGP TCP session establishes, OPEN negotiation accepts the correct AS information and the peer reaches Established before routes are evaluated.
  4. The BGP session remains Established with expected KEEPALIVE intervals, and legitimate UPDATE/withdrawal traffic is exchanged when needed.

Correct answer: A

Explanation of each choice

A.

The exact BGP path becomes active once its next hop resolves and the forwarding table has a usable adjacency or recursive next hop. Changing local preference does not make a BGP route usable if its next-hop address is unresolved.

B.

The observation confirms a different component's behavior. Its source context is: A transit customer prefix is locally active but never advertised to an approved eBGP neighbor because the export policy's final term rejects it. In this case the success criterion is: The exact BGP path becomes active once its next hop resolves and the forwarding table has a usable adjacency or recursive next hop.

C.

That check proves something else, such as: A provider changed a partner's ASN, leaving the old `peer-as` on its Junos BGP group while TCP connection attempts continue. It could pass while the stated problem remains. The targeted evidence here is: The exact BGP path becomes active once its next hop resolves and the forwarding table has a usable adjacency or recursive next hop.

D.

This would be valid for another situation: A team assumes periodic UPDATE messages keep a quiet BGP session alive, but the route table is stable and no updates are due. It does not establish that the failing boundary in this scenario works; verify: The exact BGP path becomes active once its next hop resolves and the forwarding table has a usable adjacency or recursive next hop.

Question 318

While analyzing a service failure at Oakbend Education, the following is observed: A service route remains hidden after an eBGP-to-iBGP handoff; the internal router knows the prefix but not a path to its advertised next hop. Which mechanism best explains the underlying control-plane or forwarding behavior?

  1. BGP session establishment uses a TCP connection followed by OPEN capability and AS checks; a wrong peer-as prevents normal establishment.
  2. A BGP route must have a resolvable next hop before it can become active and install usable forwarding state.
  3. Junos BGP import policy screens and modifies routes as they enter BGP route consideration rather than controlling what the local router advertises outward.
  4. BGP uses OPEN for session negotiation, KEEPALIVE for liveness, UPDATE for reachability and NOTIFICATION for error signaling.

Correct answer: B

Explanation of each choice

A.

This explains a separate protocol behavior: A provider changed a partner's ASN, leaving the old `peer-as` on its Junos BGP group while TCP connection attempts continue. In the current facts, the controlling mechanism is: A BGP route must have a resolvable next hop before it can become active and install usable forwarding state.

B.

A BGP route must have a resolvable next hop before it can become active and install usable forwarding state. The key distinction is: Changing local preference does not make a BGP route usable if its next-hop address is unresolved. Accordingly the remedy is: Restore reachability to the advertised BGP next-hop address through the correct IGP or appropriate next-hop handling, then verify route eligibility.

C.

The statement can be true when A planned customer route appears in the partner's advertisements but Junos rejects it at an early inbound policy term. But it does not explain the reported failure. Here: Changing local preference does not make a BGP route usable if its next-hop address is unresolved.

D.

That principle belongs to a different service stage: A team assumes periodic UPDATE messages keep a quiet BGP session alive, but the route table is stable and no updates are due. The directly relevant mechanism is: A BGP route must have a resolvable next hop before it can become active and install usable forwarding state.

Question 319

The following provider defect remains uncorrected at Oakbend Education: A service route remains hidden after an eBGP-to-iBGP handoff; the internal router knows the prefix but not a path to its advertised next hop. What is the most direct service or security risk of leaving it unresolved?

  1. An unresolvable BGP route may be received but never forwarded, making the prefix unreachable to customers.
  2. Traffic may exit through the wrong carrier, producing inconsistent routing or unwanted transit cost across the AS.
  3. One carrier bears all traffic while redundant capacity sits idle despite an apparently dual-homed BGP topology.
  4. Overly broad export leaks internal routing information or turns the edge into unwanted transit; overly narrow policy withholds customers.

Correct answer: A

Explanation of each choice

A.

An unresolvable BGP route may be received but never forwarded, making the prefix unreachable to customers. The direct mitigation is: Restore reachability to the advertised BGP next-hop address through the correct IGP or appropriate next-hop handling, then verify route eligibility.

B.

It is a risk in another topology or protocol state: Two paths learned inside one AS reach the same destination; the selected exit conflicts with policy despite the chosen link having fewer AS hops. Here the most direct failure path is: An unresolvable BGP route may be received but never forwarded, making the prefix unreachable to customers.

C.

The concern could occur elsewhere when A router has eBGP paths with equal relevant attributes and the operations team assumes both will automatically enter the forwarding table. For the stated scenario, the immediate risk is: An unresolvable BGP route may be received but never forwarded, making the prefix unreachable to customers.

D.

That consequence is more closely associated with another deficiency, such as: A transit customer prefix is locally active but never advertised to an approved eBGP neighbor because the export policy's final term rejects it. The described fault instead exposes: An unresolvable BGP route may be received but never forwarded, making the prefix unreachable to customers.

Question 320

A support escalation at Oakbend Education describes: A service route remains hidden after an eBGP-to-iBGP handoff; the internal router knows the prefix but not a path to its advertised next hop. Where should the Junos operator look first for decisive evidence?

  1. Check source route active state and `show route advertising-protocol bgp` with ordered export terms for the exact prefix.
  2. Inspect received advertised routes, route-hidden reasons and the exact ordered import policy attached to the BGP group.
  3. Inspect the received route's next-hop field and `show route <next-hop>` resolution path, then check the IGP transport route.
  4. Check peer topology and route advertisement path for a specific iBGP-learned prefix, identifying a missing full mesh or reflector role.

Correct answer: C

Explanation of each choice

A.

That evidence could be normal while the reported defect persists. It is aimed at: An edge advertises unapproved internal prefixes after an operator broadens a BGP export term beyond the intended customer route set. Instead inspect: Inspect the received route's next-hop field and `show route <next-hop>` resolution path, then check the IGP transport route.

B.

The check diagnoses a different layer of service. Its source issue is: A provider receives a malformed or unauthorized customer prefix yet it enters route selection after a loose import policy. The relevant initial check is: Inspect the received route's next-hop field and `show route <next-hop>` resolution path, then check the IGP transport route.

C.

Inspect the received route's next-hop field and `show route <next-hop>` resolution path, then check the IGP transport route. Changing local preference does not make a BGP route usable if its next-hop address is unresolved.

D.

That evidence could be normal while the reported defect persists. It is aimed at: A BGP speaker learns a route from one iBGP peer but does not pass it to another internal peer, causing partial prefix visibility. Instead inspect: Inspect the received route's next-hop field and `show route <next-hop>` resolution path, then check the IGP transport route.

Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests

SPECIAL OFFER: GET 10% OFF
This is ONE TIME OFFER

You save
10%

Enter Your Email Address to Receive Your 10% Off Discount Code

SPECIAL OFFER: GET 10% OFF

You save
10%

Use Discount Code:

A confirmation link was sent to your e-mail.

Please check your mailbox for a message from support@examlabs.com and follow the directions.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your email address below to get started with our interactive software demo of your free trial.

  • Realistic exam simulation and exam editor with preview functions
  • Whole exam in a single file with several different question types
  • Customizable exam-taking mode & detailed score reports