Pass Juniper JN0-364 Exam in First Attempt Easily
Real Juniper JN0-364 Exam Questions, Accurate & Verified Answers As Experienced in the Actual Test!

Verified by experts

JN0-364 Premium File

  • 69 Questions & Answers
  • Last Update: Nov 4, 2026
$69.99 $76.99

Service Provider Routing and Switching, Specialist (JNCIS-SP) JN0-364 Practice Test 33

Question 320

A support escalation at Oakbend Education describes: A service route remains hidden after an eBGP-to-iBGP handoff; the internal router knows the prefix but not a path to its advertised next hop. Where should the Junos operator look first for decisive evidence?

  1. Check source route active state and `show route advertising-protocol bgp` with ordered export terms for the exact prefix.
  2. Inspect received advertised routes, route-hidden reasons and the exact ordered import policy attached to the BGP group.
  3. Inspect the received route's next-hop field and `show route <next-hop>` resolution path, then check the IGP transport route.
  4. Check peer topology and route advertisement path for a specific iBGP-learned prefix, identifying a missing full mesh or reflector role.

Correct answer: C

Explanation of each choice

A.

That evidence could be normal while the reported defect persists. It is aimed at: An edge advertises unapproved internal prefixes after an operator broadens a BGP export term beyond the intended customer route set. Instead inspect: Inspect the received route's next-hop field and `show route <next-hop>` resolution path, then check the IGP transport route.

B.

The check diagnoses a different layer of service. Its source issue is: A provider receives a malformed or unauthorized customer prefix yet it enters route selection after a loose import policy. The relevant initial check is: Inspect the received route's next-hop field and `show route <next-hop>` resolution path, then check the IGP transport route.

C.

Inspect the received route's next-hop field and `show route <next-hop>` resolution path, then check the IGP transport route. Changing local preference does not make a BGP route usable if its next-hop address is unresolved.

D.

That evidence could be normal while the reported defect persists. It is aimed at: A BGP speaker learns a route from one iBGP peer but does not pass it to another internal peer, causing partial prefix visibility. Instead inspect: Inspect the received route's next-hop field and `show route <next-hop>` resolution path, then check the IGP transport route.

Question 321

During a Junos network change at Stonebridge Hospitality, the engineer observes: Two paths learned inside one AS reach the same destination; the selected exit conflicts with policy despite the chosen link having fewer AS hops. Which remediation most directly fixes the described problem?

  1. Verify the BGP control-channel message exchange, including KEEPALIVEs and hold timer, and fix any filtering of required message types.
  2. Enable supported BGP multipath for the intended group and verify the installed forwarding next-hop set under the required path-eligibility constraints.
  3. Attach and match the intended BGP community through correctly ordered routing policy, and validate propagation and neighbor policy handling.
  4. Set a suitable higher BGP local preference on the desired imported egress route and propagate it consistently inside the AS.

Correct answer: D

Explanation of each choice

A.

This action may apply to a different problem, for example: An intermittent control-plane firewall blocks one BGP packet class, and operators need to separate OPEN, KEEPALIVE, UPDATE and NOTIFICATION behavior. It does not repair the stated failure boundary. The case-specific reason is: Local preference controls the AS-wide preferred exit before AS-path length, unlike MED which is commonly compared for neighbor ingress selection.

B.

This action may apply to a different problem, for example: A router has eBGP paths with equal relevant attributes and the operations team assumes both will automatically enter the forwarding table. It does not repair the stated failure boundary. The case-specific reason is: Local preference controls the AS-wide preferred exit before AS-path length, unlike MED which is commonly compared for neighbor ingress selection.

C.

The other action is relevant when A carrier tags customer routes with a standard BGP community to drive downstream policy, but the tag never appears beyond the ingress edge. The current case instead requires: Set a suitable higher BGP local preference on the desired imported egress route and propagate it consistently inside the AS. The distinction is: Local preference controls the AS-wide preferred exit before AS-path length, unlike MED which is commonly compared for neighbor ingress selection.

D.

Set a suitable higher BGP local preference on the desired imported egress route and propagate it consistently inside the AS. The case-specific reason is: Local preference controls the AS-wide preferred exit before AS-path length, unlike MED which is commonly compared for neighbor ingress selection. A direct acceptance test is: Internal routers choose the policy-preferred egress based on higher local preference before comparing later path-selection attributes.

Question 322

The Junos team at Stonebridge Hospitality needs a success criterion for this defect: Two paths learned inside one AS reach the same destination; the selected exit conflicts with policy despite the chosen link having fewer AS hops. Which observed result most precisely confirms the intended repair?

  1. Internal routers choose the policy-preferred egress based on higher local preference before comparing later path-selection attributes.
  2. Best-path output shows the anticipated winner with equal preceding attributes and the intended AS-path length or policy influence.
  3. The neighbor receives only intended active advertised routes with correct attributes; internal and reserved prefixes are not leaked.
  4. The neighboring AS receives the intended MED values where applicable and its selected ingress matches the mutually understood path policy.

Correct answer: A

Explanation of each choice

A.

Internal routers choose the policy-preferred egress based on higher local preference before comparing later path-selection attributes. Local preference controls the AS-wide preferred exit before AS-path length, unlike MED which is commonly compared for neighbor ingress selection.

B.

This would be valid for another situation: Two eBGP routes have equal earlier BGP decision attributes and the operator needs to explain why a path with fewer AS numbers is preferred. It does not establish that the failing boundary in this scenario works; verify: Internal routers choose the policy-preferred egress based on higher local preference before comparing later path-selection attributes.

C.

The observation confirms a different component's behavior. Its source context is: A transit customer prefix is locally active but never advertised to an approved eBGP neighbor because the export policy's final term rejects it. In this case the success criterion is: Internal routers choose the policy-preferred egress based on higher local preference before comparing later path-selection attributes.

D.

That check proves something else, such as: An operator changes local preference on its own router expecting a remote AS to honor it, but the remote side never receives that attribute. It could pass while the stated problem remains. The targeted evidence here is: Internal routers choose the policy-preferred egress based on higher local preference before comparing later path-selection attributes.

Question 323

While analyzing a service failure at Stonebridge Hospitality, the following is observed: Two paths learned inside one AS reach the same destination; the selected exit conflicts with policy despite the chosen link having fewer AS hops. Which mechanism best explains the underlying control-plane or forwarding behavior?

  1. Ordered Junos BGP export policies determine which eligible local routes are advertised to a BGP group or neighbor.
  2. MED suggests a preferred entry point to a neighboring AS under its own BGP selection rules; local preference is internal to an AS.
  3. Junos BGP import policy screens and modifies routes as they enter BGP route consideration rather than controlling what the local router advertises outward.
  4. BGP local preference is carried within an autonomous system and favors larger values for route selection; it is not advertised to external eBGP peers.

Correct answer: D

Explanation of each choice

A.

The statement can be true when A transit customer prefix is locally active but never advertised to an approved eBGP neighbor because the export policy's final term rejects it. But it does not explain the reported failure. Here: Local preference controls the AS-wide preferred exit before AS-path length, unlike MED which is commonly compared for neighbor ingress selection.

B.

That principle belongs to a different service stage: An operator changes local preference on its own router expecting a remote AS to honor it, but the remote side never receives that attribute. The directly relevant mechanism is: BGP local preference is carried within an autonomous system and favors larger values for route selection; it is not advertised to external eBGP peers.

C.

This explains a separate protocol behavior: A provider receives a malformed or unauthorized customer prefix yet it enters route selection after a loose import policy. In the current facts, the controlling mechanism is: BGP local preference is carried within an autonomous system and favors larger values for route selection; it is not advertised to external eBGP peers.

D.

BGP local preference is carried within an autonomous system and favors larger values for route selection; it is not advertised to external eBGP peers. The key distinction is: Local preference controls the AS-wide preferred exit before AS-path length, unlike MED which is commonly compared for neighbor ingress selection. Accordingly the remedy is: Set a suitable higher BGP local preference on the desired imported egress route and propagate it consistently inside the AS.

Question 324

The following provider defect remains uncorrected at Stonebridge Hospitality: Two paths learned inside one AS reach the same destination; the selected exit conflicts with policy despite the chosen link having fewer AS hops. What is the most direct service or security risk of leaving it unresolved?

  1. Overly broad export leaks internal routing information or turns the edge into unwanted transit; overly narrow policy withholds customers.
  2. Traffic may exit through the wrong carrier, producing inconsistent routing or unwanted transit cost across the AS.
  3. An unresolvable BGP route may be received but never forwarded, making the prefix unreachable to customers.
  4. Unwanted prefixes can become active, or intended reachability can be lost if a legitimate route is rejected at import.

Correct answer: B

Explanation of each choice

A.

The concern could occur elsewhere when A transit customer prefix is locally active but never advertised to an approved eBGP neighbor because the export policy's final term rejects it. For the stated scenario, the immediate risk is: Traffic may exit through the wrong carrier, producing inconsistent routing or unwanted transit cost across the AS.

B.

Traffic may exit through the wrong carrier, producing inconsistent routing or unwanted transit cost across the AS. The direct mitigation is: Set a suitable higher BGP local preference on the desired imported egress route and propagate it consistently inside the AS.

C.

It is a risk in another topology or protocol state: A received iBGP route is visible in inet.0 but inactive because its BGP next hop cannot be resolved through the IGP. Here the most direct failure path is: Traffic may exit through the wrong carrier, producing inconsistent routing or unwanted transit cost across the AS.

D.

The concern could occur elsewhere when A planned customer route appears in the partner's advertisements but Junos rejects it at an early inbound policy term. For the stated scenario, the immediate risk is: Traffic may exit through the wrong carrier, producing inconsistent routing or unwanted transit cost across the AS.

Question 325

A support escalation at Stonebridge Hospitality describes: Two paths learned inside one AS reach the same destination; the selected exit conflicts with policy despite the chosen link having fewer AS hops. Where should the Junos operator look first for decisive evidence?

  1. Inspect received advertised routes, route-hidden reasons and the exact ordered import policy attached to the BGP group.
  2. Check outbound advertised path attributes and the remote neighbor's policy and MED comparison rules rather than assuming remote local preference.
  3. Inspect the prefix's community list before and after import/export policy and compare route term ordering.
  4. Compare best paths and local-preference values for the exact prefix on internal speakers and identify the import policy setting it.

Correct answer: D

Explanation of each choice

A.

This check may help with another root cause, for example: A provider receives a malformed or unauthorized customer prefix yet it enters route selection after a loose import policy. It does not test the first failed condition; start with: Compare best paths and local-preference values for the exact prefix on internal speakers and identify the import policy setting it.

B.

That evidence could be normal while the reported defect persists. It is aimed at: An operator changes local preference on its own router expecting a remote AS to honor it, but the remote side never receives that attribute. Instead inspect: Compare best paths and local-preference values for the exact prefix on internal speakers and identify the import policy setting it.

C.

The check diagnoses a different layer of service. Its source issue is: A carrier tags customer routes with a standard BGP community to drive downstream policy, but the tag never appears beyond the ingress edge. The relevant initial check is: Compare best paths and local-preference values for the exact prefix on internal speakers and identify the import policy setting it.

D.

Compare best paths and local-preference values for the exact prefix on internal speakers and identify the import policy setting it. Local preference controls the AS-wide preferred exit before AS-path length, unlike MED which is commonly compared for neighbor ingress selection.

Question 326

The provider operations team at Canal City University reports: A backbone operator needs to prefer a primary egress for all internal routers without changing the external partner's AS path length. Which implementation decision best corrects the cause?

  1. Attach and match the intended BGP community through correctly ordered routing policy, and validate propagation and neighbor policy handling.
  2. Set a suitable higher BGP local preference on the desired imported egress route and propagate it consistently inside the AS.
  3. Restore reachability to the advertised BGP next-hop address through the correct IGP or appropriate next-hop handling, then verify route eligibility.
  4. Adjust the neighbor's ordered BGP import policy to accept only authorized prefixes and expected attributes, then validate the received and accepted routes.

Correct answer: B

Explanation of each choice

A.

The other action is relevant when A neighbor's agreed selective-routing behavior fails because a community is added after the rejecting export term rather than before policy selection. The current case instead requires: Set a suitable higher BGP local preference on the desired imported egress route and propagate it consistently inside the AS. The distinction is: Local preference controls the AS-wide preferred exit before AS-path length, unlike MED which is commonly compared for neighbor ingress selection.

B.

Set a suitable higher BGP local preference on the desired imported egress route and propagate it consistently inside the AS. The case-specific reason is: Local preference controls the AS-wide preferred exit before AS-path length, unlike MED which is commonly compared for neighbor ingress selection. A direct acceptance test is: Internal routers choose the policy-preferred egress based on higher local preference before comparing later path-selection attributes.

C.

This action may apply to a different problem, for example: A service route remains hidden after an eBGP-to-iBGP handoff; the internal router knows the prefix but not a path to its advertised next hop. It does not repair the stated failure boundary. The case-specific reason is: Local preference controls the AS-wide preferred exit before AS-path length, unlike MED which is commonly compared for neighbor ingress selection.

D.

The other action is relevant when A provider receives a malformed or unauthorized customer prefix yet it enters route selection after a loose import policy. The current case instead requires: Set a suitable higher BGP local preference on the desired imported egress route and propagate it consistently inside the AS. The distinction is: Local preference controls the AS-wide preferred exit before AS-path length, unlike MED which is commonly compared for neighbor ingress selection.

Question 327

During a post-change check at Canal City University, the original condition was: A backbone operator needs to prefer a primary egress for all internal routers without changing the external partner's AS path length. What evidence would validate the corrected behavior?

  1. The neighboring AS receives the intended MED values where applicable and its selected ingress matches the mutually understood path policy.
  2. Internal routers choose the policy-preferred egress based on higher local preference before comparing later path-selection attributes.
  3. The intended prefix appears as an eligible received route while blocked prefixes remain rejected, with policy counters matching the design.
  4. Received or advertised route detail shows the agreed community on the exact prefixes, and downstream policy actions match its value.

Correct answer: B

Explanation of each choice

A.

The observation confirms a different component's behavior. Its source context is: An operator changes local preference on its own router expecting a remote AS to honor it, but the remote side never receives that attribute. In this case the success criterion is: Internal routers choose the policy-preferred egress based on higher local preference before comparing later path-selection attributes.

B.

Internal routers choose the policy-preferred egress based on higher local preference before comparing later path-selection attributes. Local preference controls the AS-wide preferred exit before AS-path length, unlike MED which is commonly compared for neighbor ingress selection.

C.

This would be valid for another situation: A planned customer route appears in the partner's advertisements but Junos rejects it at an early inbound policy term. It does not establish that the failing boundary in this scenario works; verify: Internal routers choose the policy-preferred egress based on higher local preference before comparing later path-selection attributes.

D.

The observation confirms a different component's behavior. Its source context is: A carrier tags customer routes with a standard BGP community to drive downstream policy, but the tag never appears beyond the ingress edge. In this case the success criterion is: Internal routers choose the policy-preferred egress based on higher local preference before comparing later path-selection attributes.

Question 328

At Canal City University, an engineer is asked to explain this case: A backbone operator needs to prefer a primary egress for all internal routers without changing the external partner's AS path length. Which underlying routing or switching principle accounts for the appropriate solution?

  1. Junos BGP import policy screens and modifies routes as they enter BGP route consideration rather than controlling what the local router advertises outward.
  2. BGP path selection evaluates several attributes in order; AS-path length is a criterion only after higher-priority decision factors tie.
  3. A BGP route must have a resolvable next hop before it can become active and install usable forwarding state.
  4. BGP local preference is carried within an autonomous system and favors larger values for route selection; it is not advertised to external eBGP peers.

Correct answer: D

Explanation of each choice

A.

This explains a separate protocol behavior: A planned customer route appears in the partner's advertisements but Junos rejects it at an early inbound policy term. In the current facts, the controlling mechanism is: BGP local preference is carried within an autonomous system and favors larger values for route selection; it is not advertised to external eBGP peers.

B.

The statement can be true when The provider expects a shorter AS path to win, but another path has a deliberately higher local preference and is selected instead. But it does not explain the reported failure. Here: Local preference controls the AS-wide preferred exit before AS-path length, unlike MED which is commonly compared for neighbor ingress selection.

C.

That principle belongs to a different service stage: A service route remains hidden after an eBGP-to-iBGP handoff; the internal router knows the prefix but not a path to its advertised next hop. The directly relevant mechanism is: BGP local preference is carried within an autonomous system and favors larger values for route selection; it is not advertised to external eBGP peers.

D.

BGP local preference is carried within an autonomous system and favors larger values for route selection; it is not advertised to external eBGP peers. The key distinction is: Local preference controls the AS-wide preferred exit before AS-path length, unlike MED which is commonly compared for neighbor ingress selection. Accordingly the remedy is: Set a suitable higher BGP local preference on the desired imported egress route and propagate it consistently inside the AS.

Question 329

A risk assessment at Canal City University identifies: A backbone operator needs to prefer a primary egress for all internal routers without changing the external partner's AS path length. Which practical consequence is most specifically tied to this failure?

  1. Traffic may exit through the wrong carrier, producing inconsistent routing or unwanted transit cost across the AS.
  2. Unwanted prefixes can become active, or intended reachability can be lost if a legitimate route is rejected at import.
  3. Routes are never exchanged with the partner, even if ICMP reachability tests across the physical link succeed.
  4. A policy tag may be lost or misapplied, causing unintended route handling or loss of a contracted service path.

Correct answer: A

Explanation of each choice

A.

Traffic may exit through the wrong carrier, producing inconsistent routing or unwanted transit cost across the AS. The direct mitigation is: Set a suitable higher BGP local preference on the desired imported egress route and propagate it consistently inside the AS.

B.

The concern could occur elsewhere when A provider receives a malformed or unauthorized customer prefix yet it enters route selection after a loose import policy. For the stated scenario, the immediate risk is: Traffic may exit through the wrong carrier, producing inconsistent routing or unwanted transit cost across the AS.

C.

That consequence is more closely associated with another deficiency, such as: A provider changed a partner's ASN, leaving the old `peer-as` on its Junos BGP group while TCP connection attempts continue. The described fault instead exposes: Traffic may exit through the wrong carrier, producing inconsistent routing or unwanted transit cost across the AS.

D.

It is a risk in another topology or protocol state: A carrier tags customer routes with a standard BGP community to drive downstream policy, but the tag never appears beyond the ingress edge. Here the most direct failure path is: Traffic may exit through the wrong carrier, producing inconsistent routing or unwanted transit cost across the AS.

Question 330

The on-call engineer at Canal City University receives this fault report: A backbone operator needs to prefer a primary egress for all internal routers without changing the external partner's AS path length. What initial check best isolates the actual failing protocol stage?

  1. Compare best paths and local-preference values for the exact prefix on internal speakers and identify the import policy setting it.
  2. Check outbound advertised path attributes and the remote neighbor's policy and MED comparison rules rather than assuming remote local preference.
  3. Check `show bgp neighbor` last-error/state and compare peer AS, local AS, neighbor address and TCP/179 reachability.
  4. Inspect best-path and alternate path attributes, multipath configuration and the forwarding next-hop group for the exact destination.

Correct answer: A

Explanation of each choice

A.

Compare best paths and local-preference values for the exact prefix on internal speakers and identify the import policy setting it. Local preference controls the AS-wide preferred exit before AS-path length, unlike MED which is commonly compared for neighbor ingress selection.

B.

This check may help with another root cause, for example: A provider advertises two links to a neighboring AS and wishes to express a preferred ingress while keeping the links as separate BGP paths. It does not test the first failed condition; start with: Compare best paths and local-preference values for the exact prefix on internal speakers and identify the import policy setting it.

C.

That evidence could be normal while the reported defect persists. It is aimed at: A provider changed a partner's ASN, leaving the old `peer-as` on its Junos BGP group while TCP connection attempts continue. Instead inspect: Compare best paths and local-preference values for the exact prefix on internal speakers and identify the import policy setting it.

D.

The check diagnoses a different layer of service. Its source issue is: Two equal eligible BGP paths to a destination exist, but forwarding uses only the best path while the service design needs shared capacity. The relevant initial check is: Compare best paths and local-preference values for the exact prefix on internal speakers and identify the import policy setting it.

Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests

SPECIAL OFFER: GET 10% OFF
This is ONE TIME OFFER

You save
10%

Enter Your Email Address to Receive Your 10% Off Discount Code

SPECIAL OFFER: GET 10% OFF

You save
10%

Use Discount Code:

A confirmation link was sent to your e-mail.

Please check your mailbox for a message from support@examlabs.com and follow the directions.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your email address below to get started with our interactive software demo of your free trial.

  • Realistic exam simulation and exam editor with preview functions
  • Whole exam in a single file with several different question types
  • Customizable exam-taking mode & detailed score reports