JN0-364 Premium File
- 69 Questions & Answers
- Last Update: Nov 4, 2026
During provider troubleshooting at Redleaf Airports, this symptom is observed: A planned customer route appears in the partner's advertisements but Junos rejects it at an early inbound policy term. Which targeted inspection should precede remediation?
That evidence could be normal while the reported defect persists. It is aimed at: A router has eBGP paths with equal relevant attributes and the operations team assumes both will automatically enter the forwarding table. Instead inspect: Inspect received advertised routes, route-hidden reasons and the exact ordered import policy attached to the BGP group.
Inspect received advertised routes, route-hidden reasons and the exact ordered import policy attached to the BGP group. Import filters inbound information; editing outbound export alone cannot make a rejected incoming path active.
This check may help with another root cause, for example: A backbone operator needs to prefer a primary egress for all internal routers without changing the external partner's AS path length. It does not test the first failed condition; start with: Inspect received advertised routes, route-hidden reasons and the exact ordered import policy attached to the BGP group.
That evidence could be normal while the reported defect persists. It is aimed at: A team assumes periodic UPDATE messages keep a quiet BGP session alive, but the route table is stable and no updates are due. Instead inspect: Inspect received advertised routes, route-hidden reasons and the exact ordered import policy attached to the BGP group.
A production change request at Firthbank Medical includes this finding: A carrier tags customer routes with a standard BGP community to drive downstream policy, but the tag never appears beyond the ingress edge. What should the engineer change to address it?
That would address a separate configuration fault: A received iBGP route is visible in inet.0 but inactive because its BGP next hop cannot be resolved through the IGP. This stem identifies a different cause, corrected by: Attach and match the intended BGP community through correctly ordered routing policy, and validate propagation and neighbor policy handling.
This action may apply to a different problem, for example: An operator changes local preference on its own router expecting a remote AS to honor it, but the remote side never receives that attribute. It does not repair the stated failure boundary. The case-specific reason is: BGP communities are route attributes used by policy rather than replacement next-hop addresses or MPLS labels.
The other action is relevant when A transit customer prefix is locally active but never advertised to an approved eBGP neighbor because the export policy's final term rejects it. The current case instead requires: Attach and match the intended BGP community through correctly ordered routing policy, and validate propagation and neighbor policy handling. The distinction is: BGP communities are route attributes used by policy rather than replacement next-hop addresses or MPLS labels.
Attach and match the intended BGP community through correctly ordered routing policy, and validate propagation and neighbor policy handling. The case-specific reason is: BGP communities are route attributes used by policy rather than replacement next-hop addresses or MPLS labels. A direct acceptance test is: Received or advertised route detail shows the agreed community on the exact prefixes, and downstream policy actions match its value.
After Firthbank Medical applies its proposed fix to this problem — A carrier tags customer routes with a standard BGP community to drive downstream policy, but the tag never appears beyond the ingress edge. — which observation best proves the specific failure has been resolved?
Received or advertised route detail shows the agreed community on the exact prefixes, and downstream policy actions match its value. BGP communities are route attributes used by policy rather than replacement next-hop addresses or MPLS labels.
The observation confirms a different component's behavior. Its source context is: A provider changed a partner's ASN, leaving the old `peer-as` on its Junos BGP group while TCP connection attempts continue. In this case the success criterion is: Received or advertised route detail shows the agreed community on the exact prefixes, and downstream policy actions match its value.
The observation confirms a different component's behavior. Its source context is: A transit customer prefix is locally active but never advertised to an approved eBGP neighbor because the export policy's final term rejects it. In this case the success criterion is: Received or advertised route detail shows the agreed community on the exact prefixes, and downstream policy actions match its value.
That check proves something else, such as: Two eBGP routes have equal earlier BGP decision attributes and the operator needs to explain why a path with fewer AS numbers is preferred. It could pass while the stated problem remains. The targeted evidence here is: Received or advertised route detail shows the agreed community on the exact prefixes, and downstream policy actions match its value.
An architecture review at Firthbank Medical examines the following symptom: A carrier tags customer routes with a standard BGP community to drive downstream policy, but the tag never appears beyond the ingress edge. What Junos or protocol mechanism is most directly responsible?
The statement can be true when A provider receives a malformed or unauthorized customer prefix yet it enters route selection after a loose import policy. But it does not explain the reported failure. Here: BGP communities are route attributes used by policy rather than replacement next-hop addresses or MPLS labels.
BGP communities are transitive policy tags when preserved and permitted; they do not themselves impose forwarding without route-policy interpretation. The key distinction is: BGP communities are route attributes used by policy rather than replacement next-hop addresses or MPLS labels. Accordingly the remedy is: Attach and match the intended BGP community through correctly ordered routing policy, and validate propagation and neighbor policy handling.
This explains a separate protocol behavior: Two equal eligible BGP paths to a destination exist, but forwarding uses only the best path while the service design needs shared capacity. In the current facts, the controlling mechanism is: BGP communities are transitive policy tags when preserved and permitted; they do not themselves impose forwarding without route-policy interpretation.
The statement can be true when A service route remains hidden after an eBGP-to-iBGP handoff; the internal router knows the prefix but not a path to its advertised next hop. But it does not explain the reported failure. Here: BGP communities are route attributes used by policy rather than replacement next-hop addresses or MPLS labels.
The team at Firthbank Medical defers a fix for this condition: A carrier tags customer routes with a standard BGP community to drive downstream policy, but the tag never appears beyond the ingress edge. What failure is most likely if no targeted control is applied?
The concern could occur elsewhere when A received iBGP route is visible in inet.0 but inactive because its BGP next hop cannot be resolved through the IGP. For the stated scenario, the immediate risk is: A policy tag may be lost or misapplied, causing unintended route handling or loss of a contracted service path.
A policy tag may be lost or misapplied, causing unintended route handling or loss of a contracted service path. The direct mitigation is: Attach and match the intended BGP community through correctly ordered routing policy, and validate propagation and neighbor policy handling.
It is a risk in another topology or protocol state: A provider receives a malformed or unauthorized customer prefix yet it enters route selection after a loose import policy. Here the most direct failure path is: A policy tag may be lost or misapplied, causing unintended route handling or loss of a contracted service path.
The concern could occur elsewhere when A backbone operator needs to prefer a primary egress for all internal routers without changing the external partner's AS path length. For the stated scenario, the immediate risk is: A policy tag may be lost or misapplied, causing unintended route handling or loss of a contracted service path.
During provider troubleshooting at Firthbank Medical, this symptom is observed: A carrier tags customer routes with a standard BGP community to drive downstream policy, but the tag never appears beyond the ingress edge. Which targeted inspection should precede remediation?
This check may help with another root cause, for example: Two paths learned inside one AS reach the same destination; the selected exit conflicts with policy despite the chosen link having fewer AS hops. It does not test the first failed condition; start with: Inspect the prefix's community list before and after import/export policy and compare route term ordering.
That evidence could be normal while the reported defect persists. It is aimed at: A planned customer route appears in the partner's advertisements but Junos rejects it at an early inbound policy term. Instead inspect: Inspect the prefix's community list before and after import/export policy and compare route term ordering.
The check diagnoses a different layer of service. Its source issue is: The provider expects a shorter AS path to win, but another path has a deliberately higher local preference and is selected instead. The relevant initial check is: Inspect the prefix's community list before and after import/export policy and compare route term ordering.
Inspect the prefix's community list before and after import/export policy and compare route term ordering. BGP communities are route attributes used by policy rather than replacement next-hop addresses or MPLS labels.
At Cascade Hosting, a service provider router shows this failure: A neighbor's agreed selective-routing behavior fails because a community is added after the rejecting export term rather than before policy selection. What is the best targeted configuration or operations action?
The other action is relevant when An edge advertises unapproved internal prefixes after an operator broadens a BGP export term beyond the intended customer route set. The current case instead requires: Attach and match the intended BGP community through correctly ordered routing policy, and validate propagation and neighbor policy handling. The distinction is: BGP communities are route attributes used by policy rather than replacement next-hop addresses or MPLS labels.
That would address a separate configuration fault: Two neighboring providers configured for eBGP have IP reachability but the BGP session remains Active because one side uses the wrong peer AS number. This stem identifies a different cause, corrected by: Attach and match the intended BGP community through correctly ordered routing policy, and validate propagation and neighbor policy handling.
This action may apply to a different problem, for example: A backbone operator needs to prefer a primary egress for all internal routers without changing the external partner's AS path length. It does not repair the stated failure boundary. The case-specific reason is: BGP communities are route attributes used by policy rather than replacement next-hop addresses or MPLS labels.
Attach and match the intended BGP community through correctly ordered routing policy, and validate propagation and neighbor policy handling. The case-specific reason is: BGP communities are route attributes used by policy rather than replacement next-hop addresses or MPLS labels. A direct acceptance test is: Received or advertised route detail shows the agreed community on the exact prefixes, and downstream policy actions match its value.
A change auditor at Cascade Hosting must validate remediation of this finding: A neighbor's agreed selective-routing behavior fails because a community is added after the rejecting export term rather than before policy selection. Which test outcome is the strongest acceptance evidence?
The observation confirms a different component's behavior. Its source context is: Two eBGP routes have equal earlier BGP decision attributes and the operator needs to explain why a path with fewer AS numbers is preferred. In this case the success criterion is: Received or advertised route detail shows the agreed community on the exact prefixes, and downstream policy actions match its value.
Received or advertised route detail shows the agreed community on the exact prefixes, and downstream policy actions match its value. BGP communities are route attributes used by policy rather than replacement next-hop addresses or MPLS labels.
This would be valid for another situation: An operator changes local preference on its own router expecting a remote AS to honor it, but the remote side never receives that attribute. It does not establish that the failing boundary in this scenario works; verify: Received or advertised route detail shows the agreed community on the exact prefixes, and downstream policy actions match its value.
The observation confirms a different component's behavior. Its source context is: A received iBGP route is visible in inet.0 but inactive because its BGP next hop cannot be resolved through the IGP. In this case the success criterion is: Received or advertised route detail shows the agreed community on the exact prefixes, and downstream policy actions match its value.
The operations training team at Cascade Hosting discusses this issue: A neighbor's agreed selective-routing behavior fails because a community is added after the rejecting export term rather than before policy selection. Which technical explanation matches the intended correction?
This explains a separate protocol behavior: A service route remains hidden after an eBGP-to-iBGP handoff; the internal router knows the prefix but not a path to its advertised next hop. In the current facts, the controlling mechanism is: BGP communities are transitive policy tags when preserved and permitted; they do not themselves impose forwarding without route-policy interpretation.
BGP communities are transitive policy tags when preserved and permitted; they do not themselves impose forwarding without route-policy interpretation. The key distinction is: BGP communities are route attributes used by policy rather than replacement next-hop addresses or MPLS labels. Accordingly the remedy is: Attach and match the intended BGP community through correctly ordered routing policy, and validate propagation and neighbor policy handling.
That principle belongs to a different service stage: An edge advertises unapproved internal prefixes after an operator broadens a BGP export term beyond the intended customer route set. The directly relevant mechanism is: BGP communities are transitive policy tags when preserved and permitted; they do not themselves impose forwarding without route-policy interpretation.
This explains a separate protocol behavior: A team assumes periodic UPDATE messages keep a quiet BGP session alive, but the route table is stable and no updates are due. In the current facts, the controlling mechanism is: BGP communities are transitive policy tags when preserved and permitted; they do not themselves impose forwarding without route-policy interpretation.
At Cascade Hosting, a service acceptance review considers the unresolved issue: A neighbor's agreed selective-routing behavior fails because a community is added after the rejecting export term rather than before policy selection. Which operational exposure follows most directly?
It is a risk in another topology or protocol state: A backbone operator needs to prefer a primary egress for all internal routers without changing the external partner's AS path length. Here the most direct failure path is: A policy tag may be lost or misapplied, causing unintended route handling or loss of a contracted service path.
The concern could occur elsewhere when A transit customer prefix is locally active but never advertised to an approved eBGP neighbor because the export policy's final term rejects it. For the stated scenario, the immediate risk is: A policy tag may be lost or misapplied, causing unintended route handling or loss of a contracted service path.
A policy tag may be lost or misapplied, causing unintended route handling or loss of a contracted service path. The direct mitigation is: Attach and match the intended BGP community through correctly ordered routing policy, and validate propagation and neighbor policy handling.
It is a risk in another topology or protocol state: Two neighboring providers configured for eBGP have IP reachability but the BGP session remains Active because one side uses the wrong peer AS number. Here the most direct failure path is: A policy tag may be lost or misapplied, causing unintended route handling or loss of a contracted service path.
Before changing configuration at Cascade Hosting, an engineer investigates: A neighbor's agreed selective-routing behavior fails because a community is added after the rejecting export term rather than before policy selection. Which first diagnostic most directly tests the suspected cause?
The check diagnoses a different layer of service. Its source issue is: Two eBGP routes have equal earlier BGP decision attributes and the operator needs to explain why a path with fewer AS numbers is preferred. The relevant initial check is: Inspect the prefix's community list before and after import/export policy and compare route term ordering.
This check may help with another root cause, for example: Two neighboring providers configured for eBGP have IP reachability but the BGP session remains Active because one side uses the wrong peer AS number. It does not test the first failed condition; start with: Inspect the prefix's community list before and after import/export policy and compare route term ordering.
That evidence could be normal while the reported defect persists. It is aimed at: An edge advertises unapproved internal prefixes after an operator broadens a BGP export term beyond the intended customer route set. Instead inspect: Inspect the prefix's community list before and after import/export policy and compare route term ordering.
Inspect the prefix's community list before and after import/export policy and compare route term ordering. BGP communities are route attributes used by policy rather than replacement next-hop addresses or MPLS labels.
Please check your mailbox for a message from support@examlabs.com and follow the directions.