JN0-650 Premium File
- 107 Questions & Answers
- Last Update: Nov 8, 2026
The enterprise wants to steer traffic toward the upstream with lower IGP cost only after local preference and AS-path checks tie. The proposed correction is: Check Junos BGP selection order and the IGP cost to each reachable next hop. Which observation MOST directly confirms this fault is resolved?
The chosen best path follows the correct egress-cost tie-break once earlier attributes tie. This is the direct acceptance evidence for the observed failure: The enterprise wants to steer traffic toward the upstream with lower IGP cost only after local preference and AS-path checks tie. The mechanism being validated is: BGP path selection considers interior cost only after higher-priority BGP attribute comparisons.
The best-path display chooses ISP-A when reachability and earlier selection criteria are satisfied. That would validate a different condition: Two valid BGP paths for one prefix have different local preference attributes, 180 on ISP-A and 100 on ISP-B, but the operator chooses the shorter AS path on B. The decisive check for the current issue is: The chosen best path follows the correct egress-cost tie-break once earlier attributes tie.
The path with one AS hop becomes the BGP best path under the controlled comparison. That would validate a different condition: Two BGP routes are equal in local preference, but one includes three AS hops and the other one, and no earlier attribute resolves the comparison. The decisive check for the current issue is: The chosen best path follows the correct egress-cost tie-break once earlier attributes tie.
The active route lists multiple eligible next hops and forwarding shows the intended load-sharing behavior. That would validate a different condition: An operator wants the same exit prefix installed with two eligible BGP next hops but only one is programmed even though costs are equal. The decisive check for the current issue is: The chosen best path follows the correct egress-cost tie-break once earlier attributes tie.
A Junos engineer proposes this response: Check Junos BGP selection order and the IGP cost to each reachable next hop. The situation is: The enterprise wants to steer traffic toward the upstream with lower IGP cost only after local preference and AS-path checks tie. Which technical principle BEST justifies the response?
BGP path selection considers interior cost only after higher-priority BGP attribute comparisons. This is the controlling mechanism in the specific case: The enterprise wants to steer traffic toward the upstream with lower IGP cost only after local preference and AS-path checks tie. It predicts the acceptance result: The chosen best path follows the correct egress-cost tie-break once earlier attributes tie.
Junos BGP compares higher LOCAL_PREF before shorter AS-path in ordinary best-path selection. This principle explains a separate situation: Two valid BGP paths for one prefix have different local preference attributes, 180 on ISP-A and 100 on ISP-B, but the operator chooses the shorter AS path on B. For this issue the relevant mechanism is: BGP path selection considers interior cost only after higher-priority BGP attribute comparisons.
BGP AS-path length acts as a path-selection discriminator after local preference. This principle explains a separate situation: Two BGP routes are equal in local preference, but one includes three AS hops and the other one, and no earlier attribute resolves the comparison. For this issue the relevant mechanism is: BGP path selection considers interior cost only after higher-priority BGP attribute comparisons.
BGP multipath can use multiple qualifying paths without making every non-best path eligible. This principle explains a separate situation: An operator wants the same exit prefix installed with two eligible BGP next hops but only one is programmed even though costs are equal. For this issue the relevant mechanism is: BGP path selection considers interior cost only after higher-priority BGP attribute comparisons.
The enterprise wants to steer traffic toward the upstream with lower IGP cost only after local preference and AS-path checks tie. If the team bypasses or fails to implement the targeted correction (Check Junos BGP selection order and the IGP cost to each reachable next hop.), which direct operational risk or residual exposure is MOST relevant?
Tuning IGP cost when local preference differs will not change the selected BGP path. This is the consequence linked to the observed situation: The enterprise wants to steer traffic toward the upstream with lower IGP cost only after local preference and AS-path checks tie. It is prevented by: Check Junos BGP selection order and the IGP cost to each reachable next hop. The underlying reason is: BGP path selection considers interior cost only after higher-priority BGP attribute comparisons.
Ignoring local preference can produce a wrong expected egress and incorrect policy remediation. This risk belongs to a different operational problem: Two valid BGP paths for one prefix have different local preference attributes, 180 on ISP-A and 100 on ISP-B, but the operator chooses the shorter AS path on B. The stated condition instead exposes this direct risk: Tuning IGP cost when local preference differs will not change the selected BGP path. The appropriate mitigation is: Check Junos BGP selection order and the IGP cost to each reachable next hop.
Ignoring AS-path differences can produce a different best path than policy designers expect. This risk belongs to a different operational problem: Two BGP routes are equal in local preference, but one includes three AS hops and the other one, and no earlier attribute resolves the comparison. The stated condition instead exposes this direct risk: Tuning IGP cost when local preference differs will not change the selected BGP path. The appropriate mitigation is: Check Junos BGP selection order and the IGP cost to each reachable next hop.
Enabling generic ECMP cannot force unequal policy paths to qualify for BGP multipath. This risk belongs to a different operational problem: An operator wants the same exit prefix installed with two eligible BGP next hops but only one is programmed even though costs are equal. The stated condition instead exposes this direct risk: Tuning IGP cost when local preference differs will not change the selected BGP path. The appropriate mitigation is: Check Junos BGP selection order and the IGP cost to each reachable next hop.
A supplier sends a BGP route with a MED that is intended only for comparison among paths received from the same neighboring AS. Which targeted engineering change is MOST directly justified by the observed evidence?
Assess MED eligibility and comparison rules before choosing a policy that treats MED as universal. This change specifically addresses the reported evidence: A supplier sends a BGP route with a MED that is intended only for comparison among paths received from the same neighboring AS. The relevant protocol mechanism is: BGP MED is an optional route attribute whose default comparison scope matters to route selection. A decisive acceptance test would be: The route comparison uses the expected MED logic for the set of applicable candidate paths.
Inspect route hidden reasons and policy tracing before restarting the functioning BGP neighbor. This is a valid solution to a different Junos situation: After an import policy change, a received BGP route remains visible as hidden instead of installed even though the session is Established. It does not directly correct the specific failure evidence here: A supplier sends a BGP route with a MED that is intended only for comparison among paths received from the same neighboring AS. The required targeted change is: Assess MED eligibility and comparison rules before choosing a policy that treats MED as universal.
Apply an appropriate peer or policy AS-path limit while preserving explicitly permitted customer destinations. This is a valid solution to a different Junos situation: One EBGP customer sends a path with too many AS numbers and the provider wants a protective bound on accepted AS paths. It does not directly correct the specific failure evidence here: A supplier sends a BGP route with a MED that is intended only for comparison among paths received from the same neighboring AS. The required targeted change is: Assess MED eligibility and comparison rules before choosing a policy that treats MED as universal.
Restore a usable unicast route to the BGP next hop before trying to override local preference. This is a valid solution to a different Junos situation: A route from an EBGP peer shows a valid next-hop address that cannot be resolved to any active transport route. It does not directly correct the specific failure evidence here: A supplier sends a BGP route with a MED that is intended only for comparison among paths received from the same neighboring AS. The required targeted change is: Assess MED eligibility and comparison rules before choosing a policy that treats MED as universal.
A supplier sends a BGP route with a MED that is intended only for comparison among paths received from the same neighboring AS. The proposed correction is: Assess MED eligibility and comparison rules before choosing a policy that treats MED as universal. Which observation MOST directly confirms this fault is resolved?
The route comparison uses the expected MED logic for the set of applicable candidate paths. This is the direct acceptance evidence for the observed failure: A supplier sends a BGP route with a MED that is intended only for comparison among paths received from the same neighboring AS. The mechanism being validated is: BGP MED is an optional route attribute whose default comparison scope matters to route selection.
The affected prefix becomes eligible under a correct policy or displays an intentional reject reason. That would validate a different condition: After an import policy change, a received BGP route remains visible as hidden instead of installed even though the session is Established. The decisive check for the current issue is: The route comparison uses the expected MED logic for the set of applicable candidate paths.
Over-limit updates are handled according to the configured guard and valid routes remain permitted. That would validate a different condition: One EBGP customer sends a path with too many AS numbers and the provider wants a protective bound on accepted AS paths. The decisive check for the current issue is: The route comparison uses the expected MED logic for the set of applicable candidate paths.
The next hop resolves and the received BGP prefix becomes eligible for active selection. That would validate a different condition: A route from an EBGP peer shows a valid next-hop address that cannot be resolved to any active transport route. The decisive check for the current issue is: The route comparison uses the expected MED logic for the set of applicable candidate paths.
A Junos engineer proposes this response: Assess MED eligibility and comparison rules before choosing a policy that treats MED as universal. The situation is: A supplier sends a BGP route with a MED that is intended only for comparison among paths received from the same neighboring AS. Which technical principle BEST justifies the response?
BGP MED is an optional route attribute whose default comparison scope matters to route selection. This is the controlling mechanism in the specific case: A supplier sends a BGP route with a MED that is intended only for comparison among paths received from the same neighboring AS. It predicts the acceptance result: The route comparison uses the expected MED logic for the set of applicable candidate paths.
A BGP Established session does not guarantee all received routes are eligible for active routing. This principle explains a separate situation: After an import policy change, a received BGP route remains visible as hidden instead of installed even though the session is Established. For this issue the relevant mechanism is: BGP MED is an optional route attribute whose default comparison scope matters to route selection.
BGP AS-path validation and peer protection can constrain anomalously long path information. This principle explains a separate situation: One EBGP customer sends a path with too many AS numbers and the provider wants a protective bound on accepted AS paths. For this issue the relevant mechanism is: BGP MED is an optional route attribute whose default comparison scope matters to route selection.
BGP next-hop reachability must be established before a route can be used for forwarding. This principle explains a separate situation: A route from an EBGP peer shows a valid next-hop address that cannot be resolved to any active transport route. For this issue the relevant mechanism is: BGP MED is an optional route attribute whose default comparison scope matters to route selection.
A supplier sends a BGP route with a MED that is intended only for comparison among paths received from the same neighboring AS. If the team bypasses or fails to implement the targeted correction (Assess MED eligibility and comparison rules before choosing a policy that treats MED as universal.), which direct operational risk or residual exposure is MOST relevant?
Assuming lower MED wins across all AS origins can produce invalid selection expectations. This is the consequence linked to the observed situation: A supplier sends a BGP route with a MED that is intended only for comparison among paths received from the same neighboring AS. It is prevented by: Assess MED eligibility and comparison rules before choosing a policy that treats MED as universal. The underlying reason is: BGP MED is an optional route attribute whose default comparison scope matters to route selection.
Restarting an otherwise healthy peering cannot fix a deterministic routing policy rejection. This risk belongs to a different operational problem: After an import policy change, a received BGP route remains visible as hidden instead of installed even though the session is Established. The stated condition instead exposes this direct risk: Assuming lower MED wins across all AS origins can produce invalid selection expectations. The appropriate mitigation is: Assess MED eligibility and comparison rules before choosing a policy that treats MED as universal.
Accepting unrestricted anomalous paths can consume resources or spread bad routing information. This risk belongs to a different operational problem: One EBGP customer sends a path with too many AS numbers and the provider wants a protective bound on accepted AS paths. The stated condition instead exposes this direct risk: Assuming lower MED wins across all AS origins can produce invalid selection expectations. The appropriate mitigation is: Assess MED eligibility and comparison rules before choosing a policy that treats MED as universal.
A high-preference route with an unreachable next hop cannot become a viable forwarding path. This risk belongs to a different operational problem: A route from an EBGP peer shows a valid next-hop address that cannot be resolved to any active transport route. The stated condition instead exposes this direct risk: Assuming lower MED wins across all AS origins can produce invalid selection expectations. The appropriate mitigation is: Assess MED eligibility and comparison rules before choosing a policy that treats MED as universal.
A BGP edge is advertising an unintended private infrastructure prefix because a catchall export policy term accepted every active route. Which targeted engineering change is MOST directly justified by the observed evidence?
Replace catchall acceptance with ordered exact route-filter terms for permitted customer prefixes. This change specifically addresses the reported evidence: A BGP edge is advertising an unintended private infrastructure prefix because a catchall export policy term accepted every active route. The relevant protocol mechanism is: Junos routing policy evaluates ordered matching terms and their explicit accept or reject actions. A decisive acceptance test would be: Only customer-approved routes are exported and the private infrastructure prefix remains hidden.
Use a term-based BGP export policy that matches the authorized active route and accepted prefix. This is a valid solution to a different Junos situation: A partner asks a Junos edge to advertise a longer prefix only when a certain route is present in the active routing table. It does not directly correct the specific failure evidence here: A BGP edge is advertising an unintended private infrastructure prefix because a catchall export policy term accepted every active route. The required targeted change is: Replace catchall acceptance with ordered exact route-filter terms for permitted customer prefixes.
Apply an appropriate peer or policy AS-path limit while preserving explicitly permitted customer destinations. This is a valid solution to a different Junos situation: One EBGP customer sends a path with too many AS numbers and the provider wants a protective bound on accepted AS paths. It does not directly correct the specific failure evidence here: A BGP edge is advertising an unintended private infrastructure prefix because a catchall export policy term accepted every active route. The required targeted change is: Replace catchall acceptance with ordered exact route-filter terms for permitted customer prefixes.
Enable and verify the inet6-unicast NLRI family on both compatible peers. This is a valid solution to a different Junos situation: An IPv6-only prefix should be exchanged over an existing BGP neighbor but the group currently negotiates only inet unicast. It does not directly correct the specific failure evidence here: A BGP edge is advertising an unintended private infrastructure prefix because a catchall export policy term accepted every active route. The required targeted change is: Replace catchall acceptance with ordered exact route-filter terms for permitted customer prefixes.
A BGP edge is advertising an unintended private infrastructure prefix because a catchall export policy term accepted every active route. The proposed correction is: Replace catchall acceptance with ordered exact route-filter terms for permitted customer prefixes. Which observation MOST directly confirms this fault is resolved?
Only customer-approved routes are exported and the private infrastructure prefix remains hidden. This is the direct acceptance evidence for the observed failure: A BGP edge is advertising an unintended private infrastructure prefix because a catchall export policy term accepted every active route. The mechanism being validated is: Junos routing policy evaluates ordered matching terms and their explicit accept or reject actions.
The peer receives precisely the eligible prefix and withdraws it when export conditions fail. That would validate a different condition: A partner asks a Junos edge to advertise a longer prefix only when a certain route is present in the active routing table. The decisive check for the current issue is: Only customer-approved routes are exported and the private infrastructure prefix remains hidden.
Over-limit updates are handled according to the configured guard and valid routes remain permitted. That would validate a different condition: One EBGP customer sends a path with too many AS numbers and the provider wants a protective bound on accepted AS paths. The decisive check for the current issue is: Only customer-approved routes are exported and the private infrastructure prefix remains hidden.
The BGP session reports inet6 capability and advertises the expected IPv6 prefix. That would validate a different condition: An IPv6-only prefix should be exchanged over an existing BGP neighbor but the group currently negotiates only inet unicast. The decisive check for the current issue is: Only customer-approved routes are exported and the private infrastructure prefix remains hidden.
A Junos engineer proposes this response: Replace catchall acceptance with ordered exact route-filter terms for permitted customer prefixes. The situation is: A BGP edge is advertising an unintended private infrastructure prefix because a catchall export policy term accepted every active route. Which technical principle BEST justifies the response?
Junos routing policy evaluates ordered matching terms and their explicit accept or reject actions. This is the controlling mechanism in the specific case: A BGP edge is advertising an unintended private infrastructure prefix because a catchall export policy term accepted every active route. It predicts the acceptance result: Only customer-approved routes are exported and the private infrastructure prefix remains hidden.
Junos BGP export policy controls which locally eligible routes enter peer advertisements. This principle explains a separate situation: A partner asks a Junos edge to advertise a longer prefix only when a certain route is present in the active routing table. For this issue the relevant mechanism is: Junos routing policy evaluates ordered matching terms and their explicit accept or reject actions.
BGP AS-path validation and peer protection can constrain anomalously long path information. This principle explains a separate situation: One EBGP customer sends a path with too many AS numbers and the provider wants a protective bound on accepted AS paths. For this issue the relevant mechanism is: Junos routing policy evaluates ordered matching terms and their explicit accept or reject actions.
BGP address families distinguish IPv4 inet from IPv6 inet6 reachability exchange. This principle explains a separate situation: An IPv6-only prefix should be exchanged over an existing BGP neighbor but the group currently negotiates only inet unicast. For this issue the relevant mechanism is: Junos routing policy evaluates ordered matching terms and their explicit accept or reject actions.
A BGP edge is advertising an unintended private infrastructure prefix because a catchall export policy term accepted every active route. If the team bypasses or fails to implement the targeted correction (Replace catchall acceptance with ordered exact route-filter terms for permitted customer prefixes.), which direct operational risk or residual exposure is MOST relevant?
A permissive final term can leak sensitive topology into external BGP advertisements. This is the consequence linked to the observed situation: A BGP edge is advertising an unintended private infrastructure prefix because a catchall export policy term accepted every active route. It is prevented by: Replace catchall acceptance with ordered exact route-filter terms for permitted customer prefixes. The underlying reason is: Junos routing policy evaluates ordered matching terms and their explicit accept or reject actions.
An unconditional export can leak prefixes when the intended backing reachability disappears. This risk belongs to a different operational problem: A partner asks a Junos edge to advertise a longer prefix only when a certain route is present in the active routing table. The stated condition instead exposes this direct risk: A permissive final term can leak sensitive topology into external BGP advertisements. The appropriate mitigation is: Replace catchall acceptance with ordered exact route-filter terms for permitted customer prefixes.
Accepting unrestricted anomalous paths can consume resources or spread bad routing information. This risk belongs to a different operational problem: One EBGP customer sends a path with too many AS numbers and the provider wants a protective bound on accepted AS paths. The stated condition instead exposes this direct risk: A permissive final term can leak sensitive topology into external BGP advertisements. The appropriate mitigation is: Replace catchall acceptance with ordered exact route-filter terms for permitted customer prefixes.
A working IPv4 BGP session does not imply IPv6 unicast NLRI negotiation is enabled. This risk belongs to a different operational problem: An IPv6-only prefix should be exchanged over an existing BGP neighbor but the group currently negotiates only inet unicast. The stated condition instead exposes this direct risk: A permissive final term can leak sensitive topology into external BGP advertisements. The appropriate mitigation is: Replace catchall acceptance with ordered exact route-filter terms for permitted customer prefixes.
Please check your mailbox for a message from support@examlabs.com and follow the directions.