JN0-650 Premium File
- 107 Questions & Answers
- Last Update: Nov 8, 2026
A BGP edge is advertising an unintended private infrastructure prefix because a catchall export policy term accepted every active route. If the team bypasses or fails to implement the targeted correction (Replace catchall acceptance with ordered exact route-filter terms for permitted customer prefixes.), which direct operational risk or residual exposure is MOST relevant?
A permissive final term can leak sensitive topology into external BGP advertisements. This is the consequence linked to the observed situation: A BGP edge is advertising an unintended private infrastructure prefix because a catchall export policy term accepted every active route. It is prevented by: Replace catchall acceptance with ordered exact route-filter terms for permitted customer prefixes. The underlying reason is: Junos routing policy evaluates ordered matching terms and their explicit accept or reject actions.
An unconditional export can leak prefixes when the intended backing reachability disappears. This risk belongs to a different operational problem: A partner asks a Junos edge to advertise a longer prefix only when a certain route is present in the active routing table. The stated condition instead exposes this direct risk: A permissive final term can leak sensitive topology into external BGP advertisements. The appropriate mitigation is: Replace catchall acceptance with ordered exact route-filter terms for permitted customer prefixes.
Accepting unrestricted anomalous paths can consume resources or spread bad routing information. This risk belongs to a different operational problem: One EBGP customer sends a path with too many AS numbers and the provider wants a protective bound on accepted AS paths. The stated condition instead exposes this direct risk: A permissive final term can leak sensitive topology into external BGP advertisements. The appropriate mitigation is: Replace catchall acceptance with ordered exact route-filter terms for permitted customer prefixes.
A working IPv4 BGP session does not imply IPv6 unicast NLRI negotiation is enabled. This risk belongs to a different operational problem: An IPv6-only prefix should be exchanged over an existing BGP neighbor but the group currently negotiates only inet unicast. The stated condition instead exposes this direct risk: A permissive final term can leak sensitive topology into external BGP advertisements. The appropriate mitigation is: Replace catchall acceptance with ordered exact route-filter terms for permitted customer prefixes.
After an import policy change, a received BGP route remains visible as hidden instead of installed even though the session is Established. Which targeted engineering change is MOST directly justified by the observed evidence?
Inspect route hidden reasons and policy tracing before restarting the functioning BGP neighbor. This change specifically addresses the reported evidence: After an import policy change, a received BGP route remains visible as hidden instead of installed even though the session is Established. The relevant protocol mechanism is: A BGP Established session does not guarantee all received routes are eligible for active routing. A decisive acceptance test would be: The affected prefix becomes eligible under a correct policy or displays an intentional reject reason.
Assess MED eligibility and comparison rules before choosing a policy that treats MED as universal. This is a valid solution to a different Junos situation: A supplier sends a BGP route with a MED that is intended only for comparison among paths received from the same neighboring AS. It does not directly correct the specific failure evidence here: After an import policy change, a received BGP route remains visible as hidden instead of installed even though the session is Established. The required targeted change is: Inspect route hidden reasons and policy tracing before restarting the functioning BGP neighbor.
Allow authenticated, narrowly scoped TCP/179 between the intended EBGP endpoints and verify session parameters. This is a valid solution to a different Junos situation: A new BGP neighbor is stuck in Active despite a valid static route to its IP address, and TCP port 179 is blocked on the transit firewall. It does not directly correct the specific failure evidence here: After an import policy change, a received BGP route remains visible as hidden instead of installed even though the session is Established. The required targeted change is: Inspect route hidden reasons and policy tracing before restarting the functioning BGP neighbor.
Apply a BGP import policy rejecting 0.0.0.0/0 and accepting only the planned application prefixes. This is a valid solution to a different Junos situation: A Junos border router receives a default from a supplier, but company policy requires rejecting that default while accepting partner application networks. It does not directly correct the specific failure evidence here: After an import policy change, a received BGP route remains visible as hidden instead of installed even though the session is Established. The required targeted change is: Inspect route hidden reasons and policy tracing before restarting the functioning BGP neighbor.
After an import policy change, a received BGP route remains visible as hidden instead of installed even though the session is Established. The proposed correction is: Inspect route hidden reasons and policy tracing before restarting the functioning BGP neighbor. Which observation MOST directly confirms this fault is resolved?
The affected prefix becomes eligible under a correct policy or displays an intentional reject reason. This is the direct acceptance evidence for the observed failure: After an import policy change, a received BGP route remains visible as hidden instead of installed even though the session is Established. The mechanism being validated is: A BGP Established session does not guarantee all received routes are eligible for active routing.
The route comparison uses the expected MED logic for the set of applicable candidate paths. That would validate a different condition: A supplier sends a BGP route with a MED that is intended only for comparison among paths received from the same neighboring AS. The decisive check for the current issue is: The affected prefix becomes eligible under a correct policy or displays an intentional reject reason.
The peer establishes its TCP session and enters Established with received NLRI. That would validate a different condition: A new BGP neighbor is stuck in Active despite a valid static route to its IP address, and TCP port 179 is blocked on the transit firewall. The decisive check for the current issue is: The affected prefix becomes eligible under a correct policy or displays an intentional reject reason.
The downstream advertised route shows the updated community without unplanned neighbor disruption. That would validate a different condition: A new BGP policy changes outbound community values, but previously advertised routes still display old metadata at the downstream peer. The decisive check for the current issue is: The affected prefix becomes eligible under a correct policy or displays an intentional reject reason.
A Junos engineer proposes this response: Inspect route hidden reasons and policy tracing before restarting the functioning BGP neighbor. The situation is: After an import policy change, a received BGP route remains visible as hidden instead of installed even though the session is Established. Which technical principle BEST justifies the response?
A BGP Established session does not guarantee all received routes are eligible for active routing. This is the controlling mechanism in the specific case: After an import policy change, a received BGP route remains visible as hidden instead of installed even though the session is Established. It predicts the acceptance result: The affected prefix becomes eligible under a correct policy or displays an intentional reject reason.
BGP MED is an optional route attribute whose default comparison scope matters to route selection. This principle explains a separate situation: A supplier sends a BGP route with a MED that is intended only for comparison among paths received from the same neighboring AS. For this issue the relevant mechanism is: A BGP Established session does not guarantee all received routes are eligible for active routing.
BGP establishes a reliable TCP transport session before exchanging routing updates. This principle explains a separate situation: A new BGP neighbor is stuck in Active despite a valid static route to its IP address, and TCP port 179 is blocked on the transit firewall. For this issue the relevant mechanism is: A BGP Established session does not guarantee all received routes are eligible for active routing.
Junos BGP import policies filter and modify routes entering the local BGP RIB. This principle explains a separate situation: A Junos border router receives a default from a supplier, but company policy requires rejecting that default while accepting partner application networks. For this issue the relevant mechanism is: A BGP Established session does not guarantee all received routes are eligible for active routing.
After an import policy change, a received BGP route remains visible as hidden instead of installed even though the session is Established. If the team bypasses or fails to implement the targeted correction (Inspect route hidden reasons and policy tracing before restarting the functioning BGP neighbor.), which direct operational risk or residual exposure is MOST relevant?
Restarting an otherwise healthy peering cannot fix a deterministic routing policy rejection. This is the consequence linked to the observed situation: After an import policy change, a received BGP route remains visible as hidden instead of installed even though the session is Established. It is prevented by: Inspect route hidden reasons and policy tracing before restarting the functioning BGP neighbor. The underlying reason is: A BGP Established session does not guarantee all received routes are eligible for active routing.
Assuming lower MED wins across all AS origins can produce invalid selection expectations. This risk belongs to a different operational problem: A supplier sends a BGP route with a MED that is intended only for comparison among paths received from the same neighboring AS. The stated condition instead exposes this direct risk: Restarting an otherwise healthy peering cannot fix a deterministic routing policy rejection. The appropriate mitigation is: Inspect route hidden reasons and policy tracing before restarting the functioning BGP neighbor.
Changing route attributes cannot repair a transport ACL blocking BGP's TCP connection. This risk belongs to a different operational problem: A new BGP neighbor is stuck in Active despite a valid static route to its IP address, and TCP port 179 is blocked on the transit firewall. The stated condition instead exposes this direct risk: Restarting an otherwise healthy peering cannot fix a deterministic routing policy rejection. The appropriate mitigation is: Inspect route hidden reasons and policy tracing before restarting the functioning BGP neighbor.
An overly broad accept can introduce an unplanned external default route and divert all traffic. This risk belongs to a different operational problem: A Junos border router receives a default from a supplier, but company policy requires rejecting that default while accepting partner application networks. The stated condition instead exposes this direct risk: Restarting an otherwise healthy peering cannot fix a deterministic routing policy rejection. The appropriate mitigation is: Inspect route hidden reasons and policy tracing before restarting the functioning BGP neighbor.
One EBGP customer sends a path with too many AS numbers and the provider wants a protective bound on accepted AS paths. Which targeted engineering change is MOST directly justified by the observed evidence?
Apply an appropriate peer or policy AS-path limit while preserving explicitly permitted customer destinations. This change specifically addresses the reported evidence: One EBGP customer sends a path with too many AS numbers and the provider wants a protective bound on accepted AS paths. The relevant protocol mechanism is: BGP AS-path validation and peer protection can constrain anomalously long path information. A decisive acceptance test would be: Over-limit updates are handled according to the configured guard and valid routes remain permitted.
Replace catchall acceptance with ordered exact route-filter terms for permitted customer prefixes. This is a valid solution to a different Junos situation: A BGP edge is advertising an unintended private infrastructure prefix because a catchall export policy term accepted every active route. It does not directly correct the specific failure evidence here: One EBGP customer sends a path with too many AS numbers and the provider wants a protective bound on accepted AS paths. The required targeted change is: Apply an appropriate peer or policy AS-path limit while preserving explicitly permitted customer destinations.
Apply controlled AS-path prepending on the applicable outbound advertisement to that external peer. This is a valid solution to a different Junos situation: The team needs to make an inbound path from one external peer less attractive to another AS without changing its own internal preference. It does not directly correct the specific failure evidence here: One EBGP customer sends a path with too many AS numbers and the provider wants a protective bound on accepted AS paths. The required targeted change is: Apply an appropriate peer or policy AS-path limit while preserving explicitly permitted customer destinations.
Verify the full BGP path-selection trace including late router-ID and peer-address tie-break steps. This is a valid solution to a different Junos situation: Two otherwise comparable BGP candidates remain tied on main attributes, but a router ID tie-break selects an unexpected peer. It does not directly correct the specific failure evidence here: One EBGP customer sends a path with too many AS numbers and the provider wants a protective bound on accepted AS paths. The required targeted change is: Apply an appropriate peer or policy AS-path limit while preserving explicitly permitted customer destinations.
One EBGP customer sends a path with too many AS numbers and the provider wants a protective bound on accepted AS paths. The proposed correction is: Apply an appropriate peer or policy AS-path limit while preserving explicitly permitted customer destinations. Which observation MOST directly confirms this fault is resolved?
Over-limit updates are handled according to the configured guard and valid routes remain permitted. This is the direct acceptance evidence for the observed failure: One EBGP customer sends a path with too many AS numbers and the provider wants a protective bound on accepted AS paths. The mechanism being validated is: BGP AS-path validation and peer protection can constrain anomalously long path information.
Only customer-approved routes are exported and the private infrastructure prefix remains hidden. That would validate a different condition: A BGP edge is advertising an unintended private infrastructure prefix because a catchall export policy term accepted every active route. The decisive check for the current issue is: Over-limit updates are handled according to the configured guard and valid routes remain permitted.
The remote AS sees the intended additional AS hops and its chosen inbound path changes where policy permits. That would validate a different condition: The team needs to make an inbound path from one external peer less attractive to another AS without changing its own internal preference. The decisive check for the current issue is: Over-limit updates are handled according to the configured guard and valid routes remain permitted.
The documented late tie-break identifies the selected peer after earlier selection criteria are equal. That would validate a different condition: Two otherwise comparable BGP candidates remain tied on main attributes, but a router ID tie-break selects an unexpected peer. The decisive check for the current issue is: Over-limit updates are handled according to the configured guard and valid routes remain permitted.
A Junos engineer proposes this response: Apply an appropriate peer or policy AS-path limit while preserving explicitly permitted customer destinations. The situation is: One EBGP customer sends a path with too many AS numbers and the provider wants a protective bound on accepted AS paths. Which technical principle BEST justifies the response?
BGP AS-path validation and peer protection can constrain anomalously long path information. This is the controlling mechanism in the specific case: One EBGP customer sends a path with too many AS numbers and the provider wants a protective bound on accepted AS paths. It predicts the acceptance result: Over-limit updates are handled according to the configured guard and valid routes remain permitted.
Junos routing policy evaluates ordered matching terms and their explicit accept or reject actions. This principle explains a separate situation: A BGP edge is advertising an unintended private infrastructure prefix because a catchall export policy term accepted every active route. For this issue the relevant mechanism is: BGP AS-path validation and peer protection can constrain anomalously long path information.
AS-path prepending can influence remote path choice but does not guarantee it overrides remote local preference. This principle explains a separate situation: The team needs to make an inbound path from one external peer less attractive to another AS without changing its own internal preference. For this issue the relevant mechanism is: BGP AS-path validation and peer protection can constrain anomalously long path information.
Late BGP deterministic tie-breaks apply only when the preceding attributes do not distinguish paths. This principle explains a separate situation: Two otherwise comparable BGP candidates remain tied on main attributes, but a router ID tie-break selects an unexpected peer. For this issue the relevant mechanism is: BGP AS-path validation and peer protection can constrain anomalously long path information.
One EBGP customer sends a path with too many AS numbers and the provider wants a protective bound on accepted AS paths. If the team bypasses or fails to implement the targeted correction (Apply an appropriate peer or policy AS-path limit while preserving explicitly permitted customer destinations.), which direct operational risk or residual exposure is MOST relevant?
Accepting unrestricted anomalous paths can consume resources or spread bad routing information. This is the consequence linked to the observed situation: One EBGP customer sends a path with too many AS numbers and the provider wants a protective bound on accepted AS paths. It is prevented by: Apply an appropriate peer or policy AS-path limit while preserving explicitly permitted customer destinations. The underlying reason is: BGP AS-path validation and peer protection can constrain anomalously long path information.
A permissive final term can leak sensitive topology into external BGP advertisements. This risk belongs to a different operational problem: A BGP edge is advertising an unintended private infrastructure prefix because a catchall export policy term accepted every active route. The stated condition instead exposes this direct risk: Accepting unrestricted anomalous paths can consume resources or spread bad routing information. The appropriate mitigation is: Apply an appropriate peer or policy AS-path limit while preserving explicitly permitted customer destinations.
Assuming prepending always wins can leave traffic using the undesired upstream during congestion. This risk belongs to a different operational problem: The team needs to make an inbound path from one external peer less attractive to another AS without changing its own internal preference. The stated condition instead exposes this direct risk: Accepting unrestricted anomalous paths can consume resources or spread bad routing information. The appropriate mitigation is: Apply an appropriate peer or policy AS-path limit while preserving explicitly permitted customer destinations.
Changing an unrelated attribute can hide why the original equal paths were selected differently. This risk belongs to a different operational problem: Two otherwise comparable BGP candidates remain tied on main attributes, but a router ID tie-break selects an unexpected peer. The stated condition instead exposes this direct risk: Accepting unrestricted anomalous paths can consume resources or spread bad routing information. The appropriate mitigation is: Apply an appropriate peer or policy AS-path limit while preserving explicitly permitted customer destinations.
A new BGP policy changes outbound community values, but previously advertised routes still display old metadata at the downstream peer. Which targeted engineering change is MOST directly justified by the observed evidence?
Trigger and verify an appropriate policy refresh or update mechanism supported by the BGP peers. This change specifically addresses the reported evidence: A new BGP policy changes outbound community values, but previously advertised routes still display old metadata at the downstream peer. The relevant protocol mechanism is: BGP advertisements reflect routing policy and may require controlled re-evaluation after changes. A decisive acceptance test would be: The downstream advertised route shows the updated community without unplanned neighbor disruption.
Confirm the appropriate family and community propagation settings on the BGP peering path. This is a valid solution to a different Junos situation: Two routers share BGP routes but their intended extended-community values are absent at a downstream policy boundary. It does not directly correct the specific failure evidence here: A new BGP policy changes outbound community values, but previously advertised routes still display old metadata at the downstream peer. The required targeted change is: Trigger and verify an appropriate policy refresh or update mechanism supported by the BGP peers.
Inspect next-hop recursive resolution and refresh the relevant IGP reachability before tuning BGP attributes. This is a valid solution to a different Junos situation: After a redundancy event, BGP still prefers an old path whose underlying transport next hop stopped resolving in the new IGP topology. It does not directly correct the specific failure evidence here: A new BGP policy changes outbound community values, but previously advertised routes still display old metadata at the downstream peer. The required targeted change is: Trigger and verify an appropriate policy refresh or update mechanism supported by the BGP peers.
Correct the neighbor's expected peer AS in the Junos BGP group configuration. This is a valid solution to a different Junos situation: BGP session establishment fails after one side is configured for the wrong remote autonomous system number. It does not directly correct the specific failure evidence here: A new BGP policy changes outbound community values, but previously advertised routes still display old metadata at the downstream peer. The required targeted change is: Trigger and verify an appropriate policy refresh or update mechanism supported by the BGP peers.
A new BGP policy changes outbound community values, but previously advertised routes still display old metadata at the downstream peer. The proposed correction is: Trigger and verify an appropriate policy refresh or update mechanism supported by the BGP peers. Which observation MOST directly confirms this fault is resolved?
The downstream advertised route shows the updated community without unplanned neighbor disruption. This is the direct acceptance evidence for the observed failure: A new BGP policy changes outbound community values, but previously advertised routes still display old metadata at the downstream peer. The mechanism being validated is: BGP advertisements reflect routing policy and may require controlled re-evaluation after changes.
The intended extended-community values appear on the received route and relevant policies match them. That would validate a different condition: Two routers share BGP routes but their intended extended-community values are absent at a downstream policy boundary. The decisive check for the current issue is: The downstream advertised route shows the updated community without unplanned neighbor disruption.
The unreachable candidate is rejected and an eligible alternative becomes active when reachable. That would validate a different condition: After a redundancy event, BGP still prefers an old path whose underlying transport next hop stopped resolving in the new IGP topology. The decisive check for the current issue is: The downstream advertised route shows the updated community without unplanned neighbor disruption.
The Open exchange succeeds and neighbor state reaches Established for the intended ASN. That would validate a different condition: BGP session establishment fails after one side is configured for the wrong remote autonomous system number. The decisive check for the current issue is: The downstream advertised route shows the updated community without unplanned neighbor disruption.
Please check your mailbox for a message from support@examlabs.com and follow the directions.