You save $69.98
SC-300 Premium Bundle
- Premium File 490 Questions & Answers
- Last Update: Nov 2, 2026
- Training Course 43 Lectures
- Study Guide 599 Pages
You save $69.98
A deployment record says the team implemented: Configure sign-in risk-based Conditional Access controls that require an approved verification response at the configured risk threshold. The failure was: A single anomalous login from an unfamiliar location should trigger extra verification without declaring the account permanently compromised. Which test outcome validates this exact change?
Sign-in risk assesses a particular authentication event, not the overall ongoing compromise state of an identity.
Risk detections provide investigative context that should be reviewed before choosing confirm-safe or dismiss actions. Instead, this case needs to establish that A simulated risky sign-in reaches the extra control while a low-risk sign-in proceeds according to its normal policy.
Blocking account sign-in is a tenant identity control whereas removing an individual app assignment is resource-specific. That observation verifies: The compromised test account is denied a fresh sign-in even to an unrelated application. It does not prove the required result: A simulated risky sign-in reaches the extra control while a low-risk sign-in proceeds according to its normal policy.
Emergency access planning must account for risk-triggered CA and access-block policies to preserve recovery capability. Instead, the required outcome is: A simulated risky sign-in reaches the extra control while a low-risk sign-in proceeds according to its normal policy.
An identity project has two requirements. A: A new employee has no existing strong authentication method and must enroll a phishing-resistant passkey without receiving a long-lived temporary password. B: A Conditional Access risk policy is broad enough to affect an emergency account during an incident. Select exactly TWO changes that jointly satisfy them.
This implements requirement A. TAP bootstraps passwordless authentication method registration and can be limited to a short validity or one-time use. Verify that the employee uses the valid pass to register a passkey and cannot reuse an expired or revoked pass.
This implements requirement B. Emergency access planning must account for risk-triggered CA and access-block policies to preserve recovery capability. Verify that emergency access remains available under documented containment conditions and standard users remain protected.
Removing an individual registered authentication method invalidates that credential without deleting every other approved method.
Risk-based MFA requires users to have a usable method or bootstrap path, not just a risk threshold.
Number matching requires the user to enter the sign-in challenge rather than approving an unrelated push blindly.
A security engineer has this implementation task: A team runs a background service with a human employee account and password because the application must call Microsoft Graph unattended. Select the best technical action, with this acceptance test: The background job operates without a human login and its token contains only the approved application roles.
App-only workload authorization uses a workload identity and permission grants rather than a personal user's delegated session. Replace the human login with an appropriate app-only service principal and narrowly scoped approved application permissions. The acceptance check is: The background job operates without a human login and its token contains only the approved application roles.
A gMSA is a domain-managed service principal that provides automatic password management for supported Windows services across multiple hosts. This does not address the actual issue: A team runs a background service with a human employee account and password because the application must call Microsoft Graph unattended.
Directory roles and Azure resource RBAC control different permission planes. In the present case, however, the missing capability is: Replace the human login with an appropriate app-only service principal and narrowly scoped approved application permissions.
Reverse-proxy session controls can govern supported cloud app actions in real time instead of simply blocking the entire app. It does not resolve A team runs a background service with a human employee account and password because the application must call Microsoft Graph unattended.
A security engineer has this implementation task: A security team needs to establish why selected web requests bypass Global Secure Access even though Internet Access is enabled. Select the best technical action, with this acceptance test: A test request documents the matching acquisition or bypass rule and a corrected in-scope request is routed as intended.
Traffic that does not match acquisition rules or matches a configured bypass does not follow the Global Secure Access service path. Review traffic forwarding acquisition and bypass rules and supported client diagnostics before changing app role assignments. The acceptance check is: A test request documents the matching acquisition or bypass rule and a corrected in-scope request is routed as intended.
Endpoint traffic forwarding depends on an installed or supported acquisition path and matching assigned profiles. In the present case, however, the missing capability is: Review traffic forwarding acquisition and bypass rules and supported client diagnostics before changing app role assignments.
Session controls or app restrictions can limit web interaction without granting full device trust. It does not resolve A security team needs to establish why selected web requests bypass Global Secure Access even though Internet Access is enabled.
Microsoft traffic and general Internet traffic use different Global Secure Access forwarding profiles. It is useful when: An endpoint successfully accesses Microsoft 365 but public web browsing must be controlled by additional internet security policy. This question instead calls for: Review traffic forwarding acquisition and bypass rules and supported client diagnostics before changing app role assignments.
Two identity controls must be deployed together. Task 1: Employees can reset passwords in the cloud but forgot to register sufficient alternate security information. Task 2: Contractor browser sessions must require reauthentication after a defined interval while other policies remain unchanged. Which coordinated action is appropriate?
Step 1: Self-service password reset depends on sufficient registered recovery methods and the user's enabled policy scope. Step 2: Sign-in frequency governs reauthentication behavior and is different from controlling how a password is initially created. Both verification checks are required: A pilot user with registered methods completes SSPR while an unregistered user receives onboarding guidance; and The test contractor is prompted to reauthenticate after the configured interval without changing unrelated user accounts.
Sign-in frequency governs reauthentication behavior and is different from controlling how a password is initially created. The other proposed action (Use appropriate device filters and Conditional Access conditions validated against registration and compliance properties) does not implement the first control. Self-service password reset depends on sufficient registered recovery methods and the user's enabled policy scope.
Self-service password reset depends on sufficient registered recovery methods and the user's enabled policy scope. The other proposed action (deploy the supported Global Secure Access client to the targeted managed endpoint population and validate connectivity) addresses a different operation. Sign-in frequency governs reauthentication behavior and is different from controlling how a password is initially created.
Self-service password reset depends on sufficient registered recovery methods and the user's enabled policy scope. Sign-in frequency governs reauthentication behavior and is different from controlling how a password is initially created. The proposed steps (Use appropriate device filters and Conditional Access conditions validated against registration and compliance properties; deploy the supported Global Secure Access client to the targeted managed endpoint population and validate connectivity) address other capabilities instead of this required pair.
The reviewed configuration is: Assign the appropriate Microsoft Entra role as PIM eligible and require activation only for the maintenance window. The original problem was: A support operator needs temporary access to update group memberships without retaining the Groups Administrator role permanently. What measured result confirms it works?
Privileged Identity Management separates standing eligible role assignment from temporary active permissions.
Restricted management administrative units block ordinary tenant-scoped Entra object modifications unless an appropriate administrator has an explicit restricted-unit assignment. That observation verifies: A standard tenant-wide User Administrator is denied a protected executive account edit while the designated unit-scoped administrator can make it. It does not prove the required result: A membership edit succeeds only during approved activation and is rejected after the assignment expires.
Resource access assignments and directory administration are separate privilege planes. Instead, the required outcome is: A membership edit succeeds only during approved activation and is rejected after the assignment expires.
Device join settings can limit who joins organizational Windows devices and are distinct from ordinary identity or group settings. Instead, this case needs to establish that A membership edit succeeds only during approved activation and is rejected after the assignment expires.
In the identity platform, the requested outcome is: A supported client re-evaluates access after the critical account change and the expected interruption occurs. The current problem is: A user was disabled during an active application session and investigators need supported near-real-time access reevaluation. What implementation meets the requirement?
CAE can cause supported applications to react to critical identity events without waiting for ordinary token expiry. Evaluate continuous access evaluation support and the relevant token or session revocation behavior for the application. The acceptance check is: A supported client re-evaluates access after the critical account change and the expected interruption occurs.
Session controls or app restrictions can limit web interaction without granting full device trust. It is useful when: A company wants to allow web access to sensitive files on unmanaged devices but prohibit downloads where the supported app control exists. This question instead calls for: Evaluate continuous access evaluation support and the relevant token or session revocation behavior for the application.
Endpoint traffic forwarding depends on an installed or supported acquisition path and matching assigned profiles. This does not address the actual issue: A user was disabled during an active application session and investigators need supported near-real-time access reevaluation.
Sign-in frequency governs reauthentication behavior and is different from controlling how a password is initially created. In the present case, however, the missing capability is: Evaluate continuous access evaluation support and the relevant token or session revocation behavior for the application.
An identity team faces this specific production requirement: An OAuth investigation finds an app whose publisher and permission grants no longer match its approved risk profile. Which control best satisfies it and would produce this evidence: The removed excessive permission no longer appears and the approved minimum access remains available?
An approved app catalog status does not guarantee that every future permission grant remains acceptable. Reassess the OAuth app permissions and remove or govern the excessive grants through supported Defender and Entra controls. The acceptance check is: The removed excessive permission no longer appears and the approved minimum access remains available.
A group name alone is not the same as an app role assignment that yields a role claim. In the present case, however, the missing capability is: Reassess the OAuth app permissions and remove or govern the excessive grants through supported Defender and Entra controls.
The Cloud app catalog provides risk and compliance context that can inform a sanctioning decision. It does not resolve An OAuth investigation finds an app whose publisher and permission grants no longer match its approved risk profile.
App control needs applicable sign-in routing and an active matching session policy to enforce an in-browser action. It is useful when: The enterprise wants session policies for one SaaS app but did not route the intended sign-ins through Conditional Access app control. This question instead calls for: Reassess the OAuth app permissions and remove or govern the excessive grants through supported Defender and Entra controls.
An operator has applied the control: Query Microsoft Entra audit logs for administrative unit membership changes and review the recorded actor and timestamp. It was intended to address: A directory audit must identify which administrator changed an administrative unit member list on a particular date. Which observation is the strongest proof of success?
Microsoft Entra audit events capture relevant administrative unit role and membership changes, unlike sign-in records that only show authentication.
Registration can represent a personal-device relationship; joining expresses a different organizational device state. Instead, this case needs to establish that The target audit entry identifies the acting principal, affected unit membership and change time.
Administrative units limit role-based write privileges but do not inherently hide all out-of-scope users from directory searches. That observation verifies: The operator can locate a user outside the unit but cannot perform a restricted write to that user. It does not prove the required result: The target audit entry identifies the acting principal, affected unit membership and change time.
A custom role can collect allowed directory permissions without bundling unrelated capabilities from a broad built-in role. Instead, the required outcome is: The target audit entry identifies the acting principal, affected unit membership and change time.
The reviewed configuration is: Reassess the OAuth app permissions and remove or govern the excessive grants through supported Defender and Entra controls. The original problem was: An OAuth investigation finds an app whose publisher and permission grants no longer match its approved risk profile. What measured result confirms it works?
An approved app catalog status does not guarantee that every future permission grant remains acceptable.
App control needs applicable sign-in routing and an active matching session policy to enforce an in-browser action. That observation verifies: The intended SaaS session is governed by the session policy and an excluded app remains unaffected. It does not prove the required result: The removed excessive permission no longer appears and the approved minimum access remains available.
A group name alone is not the same as an app role assignment that yields a role claim. The suggested evidence belongs to a separate control. Here the test must show: The removed excessive permission no longer appears and the approved minimum access remains available.
The Cloud app catalog provides risk and compliance context that can inform a sanctioning decision. Instead, the required outcome is: The removed excessive permission no longer appears and the approved minimum access remains available.
The security review requires two independent corrections. Requirement A: A device appears in the directory as registered, yet conditional access policy requires a Microsoft Entra joined corporate device. Requirement B: An AD forest attribute conflict creates duplicate or failed sync records when a second identity source joins the tenant. Which complete two-part plan meets both?
Step 1: Registration can represent a personal-device relationship; joining expresses a different organizational device state. Step 2: Hybrid identity linking relies on consistent source anchors and unique account identifiers, not arbitrary matching by display name. Both verification checks are required: The device record reports the required join state and the targeted device condition evaluates correctly; and The repaired source account links to one intended Entra user and no duplicate cloud identity is created.
Registration can represent a personal-device relationship; joining expresses a different organizational device state. The other proposed action (configure cross-tenant synchronization in the source and allow inbound synchronization in the target with controlled assignments) addresses a different operation. Hybrid identity linking relies on consistent source anchors and unique account identifiers, not arbitrary matching by display name.
The plan is partly correct, but Validate the Primary Refresh Token device SSO model rather than treating Seamless SSO as the mechanism for joined modern devices is not the missing control. Instead, use: Determine whether the device is merely registered or Microsoft Entra joined, and perform the supported organizational join if required.
Both actions target other requirements: A Windows 11 Microsoft Entra joined laptop uses a Primary Refresh Token and engineers propose enabling legacy Seamless SSO as its primary mechanism; Two owned tenants need ongoing provisioning of selected employee identities into the target tenant as organization changes occur. Neither completes the stated two-step design.
Please check your mailbox for a message from support@examlabs.com and follow the directions.